* Add Programmable Multibit ECC support for various AT91 SoC
* (C) Copyright 2012 ATMEL, Hong Xu
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
-#include <asm/arch/hardware.h>
+#include <asm/gpio.h>
#include <asm/arch/gpio.h>
-#include <asm/arch/at91_pio.h>
+#include <malloc.h>
#include <nand.h>
#include <watchdog.h>
+#include <linux/mtd/nand_ecc.h>
#ifdef CONFIG_ATMEL_NAND_HWECC
#ifdef CONFIG_ATMEL_NAND_HW_PMECC
+#ifdef CONFIG_SPL_BUILD
+#undef CONFIG_SYS_NAND_ONFI_DETECTION
+#endif
+
struct atmel_nand_host {
struct pmecc_regs __iomem *pmecc;
struct pmecc_errloc_regs __iomem *pmerrloc;
u8 pmecc_corr_cap;
u16 pmecc_sector_size;
u32 pmecc_index_table_offset;
+ u32 pmecc_version;
int pmecc_bytes_per_sector;
int pmecc_sector_number;
void __iomem *pmecc_index_of;
/* data for pmecc computation */
- int16_t pmecc_smu[(CONFIG_PMECC_CAP + 2) * (2 * CONFIG_PMECC_CAP + 1)];
- int16_t pmecc_partial_syn[2 * CONFIG_PMECC_CAP + 1];
- int16_t pmecc_si[2 * CONFIG_PMECC_CAP + 1];
- int16_t pmecc_lmu[CONFIG_PMECC_CAP + 1]; /* polynomal order */
- int pmecc_mu[CONFIG_PMECC_CAP + 1];
- int pmecc_dmu[CONFIG_PMECC_CAP + 1];
- int pmecc_delta[CONFIG_PMECC_CAP + 1];
+ int16_t *pmecc_smu;
+ int16_t *pmecc_partial_syn;
+ int16_t *pmecc_si;
+ int16_t *pmecc_lmu; /* polynomal order */
+ int *pmecc_mu;
+ int *pmecc_dmu;
+ int *pmecc_delta;
};
static struct atmel_nand_host pmecc_host;
table_size * sizeof(int16_t);
}
+static void pmecc_data_free(struct atmel_nand_host *host)
+{
+ free(host->pmecc_partial_syn);
+ free(host->pmecc_si);
+ free(host->pmecc_lmu);
+ free(host->pmecc_smu);
+ free(host->pmecc_mu);
+ free(host->pmecc_dmu);
+ free(host->pmecc_delta);
+}
+
+static int pmecc_data_alloc(struct atmel_nand_host *host)
+{
+ const int cap = host->pmecc_corr_cap;
+ int size;
+
+ size = (2 * cap + 1) * sizeof(int16_t);
+ host->pmecc_partial_syn = malloc(size);
+ host->pmecc_si = malloc(size);
+ host->pmecc_lmu = malloc((cap + 1) * sizeof(int16_t));
+ host->pmecc_smu = malloc((cap + 2) * size);
+
+ size = (cap + 1) * sizeof(int);
+ host->pmecc_mu = malloc(size);
+ host->pmecc_dmu = malloc(size);
+ host->pmecc_delta = malloc(size);
+
+ if (host->pmecc_partial_syn &&
+ host->pmecc_si &&
+ host->pmecc_lmu &&
+ host->pmecc_smu &&
+ host->pmecc_mu &&
+ host->pmecc_dmu &&
+ host->pmecc_delta)
+ return 0;
+
+ /* error happened */
+ pmecc_data_free(host);
+ return -ENOMEM;
+
+}
+
static void pmecc_gen_syndrome(struct mtd_info *mtd, int sector)
{
struct nand_chip *nand_chip = mtd->priv;
/* Fill odd syndromes */
for (i = 0; i < host->pmecc_corr_cap; i++) {
- value = readl(&host->pmecc->rem_port[sector].rem[i / 2]);
+ value = pmecc_readl(host->pmecc, rem_port[sector].rem[i / 2]);
if (i & 1)
value >>= 16;
value &= 0xffff;
int16_t *smu = host->pmecc_smu;
int timeout = PMECC_MAX_TIMEOUT_US;
- writel(PMERRLOC_DISABLE, &host->pmerrloc->eldis);
+ pmecc_writel(host->pmerrloc, eldis, PMERRLOC_DISABLE);
for (i = 0; i <= host->pmecc_lmu[cap + 1] >> 1; i++) {
- writel(smu[(cap + 1) * num + i], &host->pmerrloc->sigma[i]);
+ pmecc_writel(host->pmerrloc, sigma[i],
+ smu[(cap + 1) * num + i]);
err_nbr++;
}
if (sector_size == 1024)
val |= PMERRLOC_ELCFG_SECTOR_1024;
- writel(val, &host->pmerrloc->elcfg);
- writel(sector_size * 8 + host->pmecc_degree * cap,
- &host->pmerrloc->elen);
+ pmecc_writel(host->pmerrloc, elcfg, val);
+ pmecc_writel(host->pmerrloc, elen,
+ sector_size * 8 + host->pmecc_degree * cap);
while (--timeout) {
- if (readl(&host->pmerrloc->elisr) & PMERRLOC_CALC_DONE)
+ if (pmecc_readl(host->pmerrloc, elisr) & PMERRLOC_CALC_DONE)
break;
WATCHDOG_RESET();
udelay(1);
}
if (!timeout) {
- printk(KERN_ERR "atmel_nand : Timeout to calculate PMECC error location\n");
+ dev_err(host->dev, "atmel_nand : Timeout to calculate PMECC error location\n");
return -1;
}
- roots_nbr = (readl(&host->pmerrloc->elisr) & PMERRLOC_ERR_NUM_MASK)
+ roots_nbr = (pmecc_readl(host->pmerrloc, elisr) & PMERRLOC_ERR_NUM_MASK)
>> 8;
/* Number of roots == degree of smu hence <= cap */
if (roots_nbr == host->pmecc_lmu[cap + 1] >> 1)
sector_size = host->pmecc_sector_size;
while (err_nbr) {
- tmp = readl(&host->pmerrloc->el[i]) - 1;
+ tmp = pmecc_readl(host->pmerrloc, el[i]) - 1;
byte_pos = tmp / 8;
bit_pos = tmp % 8;
*(buf + byte_pos) ^= (1 << bit_pos);
pos = sector_num * host->pmecc_sector_size + byte_pos;
- printk(KERN_INFO "Bit flip in data area, byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n",
+ dev_dbg(host->dev, "Bit flip in data area, byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n",
pos, bit_pos, err_byte, *(buf + byte_pos));
} else {
/* Bit flip in OOB area */
ecc[tmp] ^= (1 << bit_pos);
pos = tmp + nand_chip->ecc.layout->eccpos[0];
- printk(KERN_INFO "Bit flip in OOB, oob_byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n",
+ dev_dbg(host->dev, "Bit flip in OOB, oob_byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n",
pos, bit_pos, err_byte, ecc[tmp]);
}
int i, err_nbr, eccbytes;
uint8_t *buf_pos;
+ /* SAMA5D4 PMECC IP can correct errors for all 0xff page */
+ if (host->pmecc_version >= PMECC_VERSION_SAMA5D4)
+ goto normal_check;
+
eccbytes = nand_chip->ecc.bytes;
for (i = 0; i < eccbytes; i++)
if (ecc[i] != 0xff)
err_nbr = pmecc_err_location(mtd);
if (err_nbr == -1) {
- printk(KERN_ERR "PMECC: Too many errors\n");
+ dev_err(host->dev, "PMECC: Too many errors\n");
mtd->ecc_stats.failed++;
return -EIO;
} else {
}
if (!timeout) {
- printk(KERN_ERR "atmel_nand : Timeout to read PMECC page\n");
+ dev_err(host->dev, "atmel_nand : Timeout to read PMECC page\n");
return -1;
}
}
if (!timeout) {
- printk(KERN_ERR "atmel_nand : Timeout to read PMECC status, fail to write PMECC in oob\n");
+ dev_err(host->dev, "atmel_nand : Timeout to read PMECC status, fail to write PMECC in oob\n");
goto out;
}
pos = i * host->pmecc_bytes_per_sector + j;
chip->oob_poi[eccpos[pos]] =
- readb(&host->pmecc->ecc_port[i].ecc[j]);
+ pmecc_readb(host->pmecc, ecc_port[i].ecc[j]);
}
}
chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
pmecc_writel(host->pmecc, ctrl, PMECC_CTRL_ENABLE);
}
+#ifdef CONFIG_SYS_NAND_ONFI_DETECTION
+/*
+ * get_onfi_ecc_param - Get ECC requirement from ONFI parameters
+ * @ecc_bits: store the ONFI ECC correct bits capbility
+ * @sector_size: in how many bytes that ONFI require to correct @ecc_bits
+ *
+ * Returns -1 if ONFI parameters is not supported. In this case @ecc_bits,
+ * @sector_size are initialize to 0.
+ * Return 0 if success to get the ECC requirement.
+ */
+static int get_onfi_ecc_param(struct nand_chip *chip,
+ int *ecc_bits, int *sector_size)
+{
+ *ecc_bits = *sector_size = 0;
+
+ if (chip->onfi_params.ecc_bits == 0xff)
+ /* TODO: the sector_size and ecc_bits need to be find in
+ * extended ecc parameter, currently we don't support it.
+ */
+ return -1;
+
+ *ecc_bits = chip->onfi_params.ecc_bits;
+
+ /* The default sector size (ecc codeword size) is 512 */
+ *sector_size = 512;
+
+ return 0;
+}
+
+/*
+ * pmecc_choose_ecc - Get ecc requirement from ONFI parameters. If
+ * pmecc_corr_cap or pmecc_sector_size is 0, then set it as
+ * ONFI ECC parameters.
+ * @host: point to an atmel_nand_host structure.
+ * if host->pmecc_corr_cap is 0 then set it as the ONFI ecc_bits.
+ * if host->pmecc_sector_size is 0 then set it as the ONFI sector_size.
+ * @chip: point to an nand_chip structure.
+ * @cap: store the ONFI ECC correct bits capbility
+ * @sector_size: in how many bytes that ONFI require to correct @ecc_bits
+ *
+ * Return 0 if success. otherwise return the error code.
+ */
+static int pmecc_choose_ecc(struct atmel_nand_host *host,
+ struct nand_chip *chip,
+ int *cap, int *sector_size)
+{
+ /* Get ECC requirement from ONFI parameters */
+ *cap = *sector_size = 0;
+ if (chip->onfi_version) {
+ if (!get_onfi_ecc_param(chip, cap, sector_size)) {
+ MTDDEBUG(MTD_DEBUG_LEVEL1, "ONFI params, minimum required ECC: %d bits in %d bytes\n",
+ *cap, *sector_size);
+ } else {
+ dev_info(host->dev, "NAND chip ECC reqirement is in Extended ONFI parameter, we don't support yet.\n");
+ }
+ } else {
+ dev_info(host->dev, "NAND chip is not ONFI compliant, assume ecc_bits is 2 in 512 bytes");
+ }
+ if (*cap == 0 && *sector_size == 0) {
+ /* Non-ONFI compliant or use extended ONFI parameters */
+ *cap = 2;
+ *sector_size = 512;
+ }
+
+ /* If head file doesn't specify then use the one in ONFI parameters */
+ if (host->pmecc_corr_cap == 0) {
+ /* use the most fitable ecc bits (the near bigger one ) */
+ if (*cap <= 2)
+ host->pmecc_corr_cap = 2;
+ else if (*cap <= 4)
+ host->pmecc_corr_cap = 4;
+ else if (*cap <= 8)
+ host->pmecc_corr_cap = 8;
+ else if (*cap <= 12)
+ host->pmecc_corr_cap = 12;
+ else if (*cap <= 24)
+ host->pmecc_corr_cap = 24;
+ else
+ return -EINVAL;
+ }
+ if (host->pmecc_sector_size == 0) {
+ /* use the most fitable sector size (the near smaller one ) */
+ if (*sector_size >= 1024)
+ host->pmecc_sector_size = 1024;
+ else if (*sector_size >= 512)
+ host->pmecc_sector_size = 512;
+ else
+ return -EINVAL;
+ }
+ return 0;
+}
+#endif
+
+#if defined(NO_GALOIS_TABLE_IN_ROM)
+static uint16_t *pmecc_galois_table;
+static inline int deg(unsigned int poly)
+{
+ /* polynomial degree is the most-significant bit index */
+ return fls(poly) - 1;
+}
+
+static int build_gf_tables(int mm, unsigned int poly,
+ int16_t *index_of, int16_t *alpha_to)
+{
+ unsigned int i, x = 1;
+ const unsigned int k = 1 << deg(poly);
+ unsigned int nn = (1 << mm) - 1;
+
+ /* primitive polynomial must be of degree m */
+ if (k != (1u << mm))
+ return -EINVAL;
+
+ for (i = 0; i < nn; i++) {
+ alpha_to[i] = x;
+ index_of[x] = i;
+ if (i && (x == 1))
+ /* polynomial is not primitive (a^i=1 with 0<i<2^m-1) */
+ return -EINVAL;
+ x <<= 1;
+ if (x & k)
+ x ^= poly;
+ }
+
+ alpha_to[nn] = 1;
+ index_of[0] = 0;
+
+ return 0;
+}
+
+static uint16_t *create_lookup_table(int sector_size)
+{
+ int degree = (sector_size == 512) ?
+ PMECC_GF_DIMENSION_13 :
+ PMECC_GF_DIMENSION_14;
+ unsigned int poly = (sector_size == 512) ?
+ PMECC_GF_13_PRIMITIVE_POLY :
+ PMECC_GF_14_PRIMITIVE_POLY;
+ int table_size = (sector_size == 512) ?
+ PMECC_INDEX_TABLE_SIZE_512 :
+ PMECC_INDEX_TABLE_SIZE_1024;
+
+ int16_t *addr = kzalloc(2 * table_size * sizeof(uint16_t), GFP_KERNEL);
+ if (addr && build_gf_tables(degree, poly, addr, addr + table_size))
+ return NULL;
+
+ return (uint16_t *)addr;
+}
+#endif
+
static int atmel_pmecc_nand_init_params(struct nand_chip *nand,
struct mtd_info *mtd)
{
nand->ecc.correct = NULL;
nand->ecc.hwctl = NULL;
- cap = host->pmecc_corr_cap = CONFIG_PMECC_CAP;
- sector_size = host->pmecc_sector_size = CONFIG_PMECC_SECTOR_SIZE;
- host->pmecc_index_table_offset = CONFIG_PMECC_INDEX_TABLE_OFFSET;
+#ifdef CONFIG_SYS_NAND_ONFI_DETECTION
+ host->pmecc_corr_cap = host->pmecc_sector_size = 0;
+
+#ifdef CONFIG_PMECC_CAP
+ host->pmecc_corr_cap = CONFIG_PMECC_CAP;
+#endif
+#ifdef CONFIG_PMECC_SECTOR_SIZE
+ host->pmecc_sector_size = CONFIG_PMECC_SECTOR_SIZE;
+#endif
+ /* Get ECC requirement of ONFI parameters. And if CONFIG_PMECC_CAP or
+ * CONFIG_PMECC_SECTOR_SIZE not defined, then use ecc_bits, sector_size
+ * from ONFI.
+ */
+ if (pmecc_choose_ecc(host, nand, &cap, §or_size)) {
+ dev_err(host->dev, "The NAND flash's ECC requirement(ecc_bits: %d, sector_size: %d) are not support!",
+ cap, sector_size);
+ return -EINVAL;
+ }
+
+ if (cap > host->pmecc_corr_cap)
+ dev_info(host->dev, "WARNING: Using different ecc correct bits(%d bit) from Nand ONFI ECC reqirement (%d bit).\n",
+ host->pmecc_corr_cap, cap);
+ if (sector_size < host->pmecc_sector_size)
+ dev_info(host->dev, "WARNING: Using different ecc correct sector size (%d bytes) from Nand ONFI ECC reqirement (%d bytes).\n",
+ host->pmecc_sector_size, sector_size);
+#else /* CONFIG_SYS_NAND_ONFI_DETECTION */
+ host->pmecc_corr_cap = CONFIG_PMECC_CAP;
+ host->pmecc_sector_size = CONFIG_PMECC_SECTOR_SIZE;
+#endif
+
+ cap = host->pmecc_corr_cap;
+ sector_size = host->pmecc_sector_size;
+
+ /* TODO: need check whether cap & sector_size is validate */
+#if defined(NO_GALOIS_TABLE_IN_ROM)
+ /*
+ * As pmecc_rom_base is the begin of the gallois field table, So the
+ * index offset just set as 0.
+ */
+ host->pmecc_index_table_offset = 0;
+#else
+ if (host->pmecc_sector_size == 512)
+ host->pmecc_index_table_offset = ATMEL_PMECC_INDEX_OFFSET_512;
+ else
+ host->pmecc_index_table_offset = ATMEL_PMECC_INDEX_OFFSET_1024;
+#endif
MTDDEBUG(MTD_DEBUG_LEVEL1,
"Initialize PMECC params, cap: %d, sector: %d\n",
host->pmecc = (struct pmecc_regs __iomem *) ATMEL_BASE_PMECC;
host->pmerrloc = (struct pmecc_errloc_regs __iomem *)
ATMEL_BASE_PMERRLOC;
+#if defined(NO_GALOIS_TABLE_IN_ROM)
+ pmecc_galois_table = create_lookup_table(host->pmecc_sector_size);
+ if (!pmecc_galois_table) {
+ dev_err(host->dev, "out of memory\n");
+ return -ENOMEM;
+ }
+
+ host->pmecc_rom_base = (void __iomem *)pmecc_galois_table;
+#else
host->pmecc_rom_base = (void __iomem *) ATMEL_BASE_ROM;
+#endif
/* ECC is calculated for the whole page (1 step) */
nand->ecc.size = mtd->writesize;
switch (mtd->writesize) {
case 2048:
case 4096:
- host->pmecc_degree = PMECC_GF_DIMENSION_13;
+ case 8192:
+ host->pmecc_degree = (sector_size == 512) ?
+ PMECC_GF_DIMENSION_13 : PMECC_GF_DIMENSION_14;
host->pmecc_cw_len = (1 << host->pmecc_degree) - 1;
host->pmecc_sector_number = mtd->writesize / sector_size;
host->pmecc_bytes_per_sector = pmecc_get_ecc_bytes(
nand->ecc.steps = 1;
nand->ecc.bytes = host->pmecc_bytes_per_sector *
host->pmecc_sector_number;
+
+ if (nand->ecc.bytes > MTD_MAX_ECCPOS_ENTRIES_LARGE) {
+ dev_err(host->dev, "too large eccpos entries. max support ecc.bytes is %d\n",
+ MTD_MAX_ECCPOS_ENTRIES_LARGE);
+ return -EINVAL;
+ }
+
if (nand->ecc.bytes > mtd->oobsize - 2) {
- printk(KERN_ERR "No room for ECC bytes\n");
+ dev_err(host->dev, "No room for ECC bytes\n");
return -EINVAL;
}
pmecc_config_ecc_layout(&atmel_pmecc_oobinfo,
case 512:
case 1024:
/* TODO */
- printk(KERN_ERR "Unsupported page size for PMECC, use Software ECC\n");
+ dev_err(host->dev, "Unsupported page size for PMECC, use Software ECC\n");
default:
/* page size not handled by HW ECC */
/* switching back to soft ECC */
return 0;
}
+ /* Allocate data for PMECC computation */
+ if (pmecc_data_alloc(host)) {
+ dev_err(host->dev, "Cannot allocate memory for PMECC computation!\n");
+ return -ENOMEM;
+ }
+
+ nand->options |= NAND_NO_SUBPAGE_WRITE;
nand->ecc.read_page = atmel_nand_pmecc_read_page;
nand->ecc.write_page = atmel_nand_pmecc_write_page;
nand->ecc.strength = cap;
+ /* Check the PMECC ip version */
+ host->pmecc_version = pmecc_readl(host->pmerrloc, version);
+ dev_dbg(host->dev, "PMECC IP version is: %x\n", host->pmecc_version);
+
atmel_pmecc_core_init(mtd);
return 0;
/* it doesn't seems to be a freshly
* erased block.
* We can't correct so many errors */
- printk(KERN_WARNING "atmel_nand : multiple errors detected."
+ dev_warn(host->dev, "atmel_nand : multiple errors detected."
" Unable to correct.\n");
return -EIO;
}
/* there's nothing much to do here.
* the bit error is on the ECC itself.
*/
- printk(KERN_WARNING "atmel_nand : one bit error on ECC code."
+ dev_warn(host->dev, "atmel_nand : one bit error on ECC code."
" Nothing to correct\n");
return 0;
}
- printk(KERN_WARNING "atmel_nand : one bit error on data."
+ dev_warn(host->dev, "atmel_nand : one bit error on data."
" (word offset in the page :"
" 0x%x bit offset : 0x%x)\n",
ecc_word, ecc_bit);
/* 8 bits words */
dat[ecc_word] ^= (1 << ecc_bit);
}
- printk(KERN_WARNING "atmel_nand : error corrected\n");
+ dev_warn(host->dev, "atmel_nand : error corrected\n");
return 1;
}
IO_ADDR_W |= CONFIG_SYS_NAND_MASK_ALE;
#ifdef CONFIG_SYS_NAND_ENABLE_PIN
- at91_set_gpio_value(CONFIG_SYS_NAND_ENABLE_PIN,
- !(ctrl & NAND_NCE));
+ gpio_set_value(CONFIG_SYS_NAND_ENABLE_PIN, !(ctrl & NAND_NCE));
#endif
this->IO_ADDR_W = (void *) IO_ADDR_W;
}
#ifdef CONFIG_SYS_NAND_READY_PIN
static int at91_nand_ready(struct mtd_info *mtd)
{
- return at91_get_gpio_value(CONFIG_SYS_NAND_READY_PIN);
+ return gpio_get_value(CONFIG_SYS_NAND_READY_PIN);
+}
+#endif
+
+#ifdef CONFIG_SPL_BUILD
+/* The following code is for SPL */
+static nand_info_t mtd;
+static struct nand_chip nand_chip;
+
+static int nand_command(int block, int page, uint32_t offs, u8 cmd)
+{
+ struct nand_chip *this = mtd.priv;
+ int page_addr = page + block * CONFIG_SYS_NAND_PAGE_COUNT;
+ void (*hwctrl)(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl) = this->cmd_ctrl;
+
+ while (!this->dev_ready(&mtd))
+ ;
+
+ if (cmd == NAND_CMD_READOOB) {
+ offs += CONFIG_SYS_NAND_PAGE_SIZE;
+ cmd = NAND_CMD_READ0;
+ }
+
+ hwctrl(&mtd, cmd, NAND_CTRL_CLE | NAND_CTRL_CHANGE);
+
+ if ((this->options & NAND_BUSWIDTH_16) && !nand_opcode_8bits(cmd))
+ offs >>= 1;
+
+ hwctrl(&mtd, offs & 0xff, NAND_CTRL_ALE | NAND_CTRL_CHANGE);
+ hwctrl(&mtd, (offs >> 8) & 0xff, NAND_CTRL_ALE);
+ hwctrl(&mtd, (page_addr & 0xff), NAND_CTRL_ALE);
+ hwctrl(&mtd, ((page_addr >> 8) & 0xff), NAND_CTRL_ALE);
+#ifdef CONFIG_SYS_NAND_5_ADDR_CYCLE
+ hwctrl(&mtd, (page_addr >> 16) & 0x0f, NAND_CTRL_ALE);
+#endif
+ hwctrl(&mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
+
+ hwctrl(&mtd, NAND_CMD_READSTART, NAND_CTRL_CLE | NAND_CTRL_CHANGE);
+ hwctrl(&mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
+
+ while (!this->dev_ready(&mtd))
+ ;
+
+ return 0;
+}
+
+static int nand_is_bad_block(int block)
+{
+ struct nand_chip *this = mtd.priv;
+
+ nand_command(block, 0, CONFIG_SYS_NAND_BAD_BLOCK_POS, NAND_CMD_READOOB);
+
+ if (this->options & NAND_BUSWIDTH_16) {
+ if (readw(this->IO_ADDR_R) != 0xffff)
+ return 1;
+ } else {
+ if (readb(this->IO_ADDR_R) != 0xff)
+ return 1;
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_SPL_NAND_ECC
+static int nand_ecc_pos[] = CONFIG_SYS_NAND_ECCPOS;
+#define ECCSTEPS (CONFIG_SYS_NAND_PAGE_SIZE / \
+ CONFIG_SYS_NAND_ECCSIZE)
+#define ECCTOTAL (ECCSTEPS * CONFIG_SYS_NAND_ECCBYTES)
+
+static int nand_read_page(int block, int page, void *dst)
+{
+ struct nand_chip *this = mtd.priv;
+ u_char ecc_calc[ECCTOTAL];
+ u_char ecc_code[ECCTOTAL];
+ u_char oob_data[CONFIG_SYS_NAND_OOBSIZE];
+ int eccsize = CONFIG_SYS_NAND_ECCSIZE;
+ int eccbytes = CONFIG_SYS_NAND_ECCBYTES;
+ int eccsteps = ECCSTEPS;
+ int i;
+ uint8_t *p = dst;
+ nand_command(block, page, 0, NAND_CMD_READ0);
+
+ for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
+ if (this->ecc.mode != NAND_ECC_SOFT)
+ this->ecc.hwctl(&mtd, NAND_ECC_READ);
+ this->read_buf(&mtd, p, eccsize);
+ this->ecc.calculate(&mtd, p, &ecc_calc[i]);
+ }
+ this->read_buf(&mtd, oob_data, CONFIG_SYS_NAND_OOBSIZE);
+
+ for (i = 0; i < ECCTOTAL; i++)
+ ecc_code[i] = oob_data[nand_ecc_pos[i]];
+
+ eccsteps = ECCSTEPS;
+ p = dst;
+
+ for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize)
+ this->ecc.correct(&mtd, p, &ecc_code[i], &ecc_calc[i]);
+
+ return 0;
+}
+
+int spl_nand_erase_one(int block, int page)
+{
+ struct nand_chip *this = mtd.priv;
+ void (*hwctrl)(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl) = this->cmd_ctrl;
+ int page_addr;
+
+ if (nand_chip.select_chip)
+ nand_chip.select_chip(&mtd, 0);
+
+ page_addr = page + block * CONFIG_SYS_NAND_PAGE_COUNT;
+ hwctrl(&mtd, NAND_CMD_ERASE1, NAND_CTRL_CLE | NAND_CTRL_CHANGE);
+ /* Row address */
+ hwctrl(&mtd, (page_addr & 0xff), NAND_CTRL_ALE | NAND_CTRL_CHANGE);
+ hwctrl(&mtd, ((page_addr >> 8) & 0xff),
+ NAND_CTRL_ALE | NAND_CTRL_CHANGE);
+#ifdef CONFIG_SYS_NAND_5_ADDR_CYCLE
+ /* One more address cycle for devices > 128MiB */
+ hwctrl(&mtd, (page_addr >> 16) & 0x0f,
+ NAND_CTRL_ALE | NAND_CTRL_CHANGE);
+#endif
+
+ hwctrl(&mtd, NAND_CMD_ERASE2, NAND_CTRL_CLE | NAND_CTRL_CHANGE);
+ udelay(2000);
+
+ while (!this->dev_ready(&mtd))
+ ;
+
+ nand_deselect();
+
+ return 0;
+}
+#else
+static int nand_read_page(int block, int page, void *dst)
+{
+ struct nand_chip *this = mtd.priv;
+
+ nand_command(block, page, 0, NAND_CMD_READ0);
+ atmel_nand_pmecc_read_page(&mtd, this, dst, 0, page);
+
+ return 0;
+}
+#endif /* CONFIG_SPL_NAND_ECC */
+
+int nand_spl_load_image(uint32_t offs, unsigned int size, void *dst)
+{
+ unsigned int block, lastblock;
+ unsigned int page;
+
+ block = offs / CONFIG_SYS_NAND_BLOCK_SIZE;
+ lastblock = (offs + size - 1) / CONFIG_SYS_NAND_BLOCK_SIZE;
+ page = (offs % CONFIG_SYS_NAND_BLOCK_SIZE) / CONFIG_SYS_NAND_PAGE_SIZE;
+
+ while (block <= lastblock) {
+ if (!nand_is_bad_block(block)) {
+ while (page < CONFIG_SYS_NAND_PAGE_COUNT) {
+ nand_read_page(block, page, dst);
+ dst += CONFIG_SYS_NAND_PAGE_SIZE;
+ page++;
+ }
+
+ page = 0;
+ } else {
+ lastblock++;
+ }
+
+ block++;
+ }
+
+ return 0;
+}
+
+int at91_nand_wait_ready(struct mtd_info *mtd)
+{
+ struct nand_chip *this = mtd->priv;
+
+ udelay(this->chip_delay);
+
+ return 1;
+}
+
+int board_nand_init(struct nand_chip *nand)
+{
+ int ret = 0;
+
+ nand->ecc.mode = NAND_ECC_SOFT;
+#ifdef CONFIG_SYS_NAND_DBW_16
+ nand->options = NAND_BUSWIDTH_16;
+ nand->read_buf = nand_read_buf16;
+#else
+ nand->read_buf = nand_read_buf;
+#endif
+ nand->cmd_ctrl = at91_nand_hwcontrol;
+#ifdef CONFIG_SYS_NAND_READY_PIN
+ nand->dev_ready = at91_nand_ready;
+#else
+ nand->dev_ready = at91_nand_wait_ready;
+#endif
+ nand->chip_delay = 20;
+
+#ifdef CONFIG_ATMEL_NAND_HWECC
+#ifdef CONFIG_ATMEL_NAND_HW_PMECC
+ ret = atmel_pmecc_nand_init_params(nand, &mtd);
+#endif
+#endif
+
+ return ret;
}
+
+void nand_init(void)
+{
+ mtd.writesize = CONFIG_SYS_NAND_PAGE_SIZE;
+ mtd.oobsize = CONFIG_SYS_NAND_OOBSIZE;
+ mtd.priv = &nand_chip;
+ nand_chip.IO_ADDR_R = (void __iomem *)CONFIG_SYS_NAND_BASE;
+ nand_chip.IO_ADDR_W = (void __iomem *)CONFIG_SYS_NAND_BASE;
+ board_nand_init(&nand_chip);
+
+#ifdef CONFIG_SPL_NAND_ECC
+ if (nand_chip.ecc.mode == NAND_ECC_SOFT) {
+ nand_chip.ecc.calculate = nand_calculate_ecc;
+ nand_chip.ecc.correct = nand_correct_data;
+ }
#endif
+ if (nand_chip.select_chip)
+ nand_chip.select_chip(&mtd, 0);
+}
+
+void nand_deselect(void)
+{
+ if (nand_chip.select_chip)
+ nand_chip.select_chip(&mtd, -1);
+}
+
+#else
+
#ifndef CONFIG_SYS_NAND_BASE_LIST
#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
#endif
mtd->priv = nand;
nand->IO_ADDR_R = nand->IO_ADDR_W = (void __iomem *)base_addr;
+#ifdef CONFIG_NAND_ECC_BCH
+ nand->ecc.mode = NAND_ECC_SOFT_BCH;
+#else
nand->ecc.mode = NAND_ECC_SOFT;
+#endif
#ifdef CONFIG_SYS_NAND_DBW_16
nand->options = NAND_BUSWIDTH_16;
#endif
#ifdef CONFIG_SYS_NAND_READY_PIN
nand->dev_ready = at91_nand_ready;
#endif
- nand->chip_delay = 20;
+ nand->chip_delay = 75;
ret = nand_scan_ident(mtd, CONFIG_SYS_NAND_MAX_CHIPS, NULL);
if (ret)
int i;
for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
if (atmel_nand_chip_init(i, base_addr[i]))
- printk(KERN_ERR "atmel_nand: Fail to initialize #%d chip",
+ dev_err(host->dev, "atmel_nand: Fail to initialize #%d chip",
i);
}
+#endif /* CONFIG_SPL_BUILD */