#include <linux/device.h>
#include <linux/string.h>
#include <linux/vmalloc.h>
+#include <linux/notifier.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/ubi.h>
UBI_IO_BITFLIPS
};
+/*
+ * Return codes of the 'ubi_eba_copy_leb()' function.
+ *
+ * MOVE_CANCEL_RACE: canceled because the volume is being deleted, the source
+ * PEB was put meanwhile, or there is I/O on the source PEB
+ * MOVE_SOURCE_RD_ERR: canceled because there was a read error from the source
+ * PEB
+ * MOVE_TARGET_RD_ERR: canceled because there was a read error from the target
+ * PEB
+ * MOVE_TARGET_WR_ERR: canceled because there was a write error to the target
+ * PEB
+ * MOVE_CANCEL_BITFLIPS: canceled because a bit-flip was detected in the
+ * target PEB
+ */
+enum {
+ MOVE_CANCEL_RACE = 1,
+ MOVE_SOURCE_RD_ERR,
+ MOVE_TARGET_RD_ERR,
+ MOVE_TARGET_WR_ERR,
+ MOVE_CANCEL_BITFLIPS,
+};
+
/**
* struct ubi_wl_entry - wear-leveling entry.
* @u.rb: link in the corresponding (free/used) RB-tree
* @changing_leb: %1 if the atomic LEB change ioctl command is in progress
* @direct_writes: %1 if direct writes are enabled for this volume
*
- * @gluebi_desc: gluebi UBI volume descriptor
- * @gluebi_refcount: reference count of the gluebi MTD device
- * @gluebi_mtd: MTD device description object of the gluebi MTD device
- *
* The @corrupted field indicates that the volume's contents is corrupted.
* Since UBI protects only static volumes, this field is not relevant to
* dynamic volumes - it is user's responsibility to assure their data
unsigned int updating:1;
unsigned int changing_leb:1;
unsigned int direct_writes:1;
-
-#ifdef CONFIG_MTD_UBI_GLUEBI
- /*
- * Gluebi-related stuff may be compiled out.
- * Note: this should not be built into UBI but should be a separate
- * ubimtd driver which works on top of UBI and emulates MTD devices.
- */
- struct ubi_volume_desc *gluebi_desc;
- int gluebi_refcount;
- struct mtd_info gluebi_mtd;
-#endif
};
/**
* @vol->readers, @vol->writers, @vol->exclusive,
* @vol->ref_count, @vol->mapping and @vol->eba_tbl.
* @ref_count: count of references on the UBI device
+ * @image_seq: image sequence number recorded on EC headers
*
* @rsvd_pebs: count of reserved physical eraseblocks
* @avail_pebs: count of available physical eraseblocks
* @alc_mutex: serializes "atomic LEB change" operations
*
* @used: RB-tree of used physical eraseblocks
+ * @erroneous: RB-tree of erroneous used physical eraseblocks
* @free: RB-tree of free physical eraseblocks
* @scrub: RB-tree of physical eraseblocks which need scrubbing
* @pq: protection queue (contain physical eraseblocks which are temporarily
* protected from the wear-leveling worker)
* @pq_head: protection queue head
* @wl_lock: protects the @used, @free, @pq, @pq_head, @lookuptbl, @move_from,
- * @move_to, @move_to_put @erase_pending, @wl_scheduled and @works
- * fields
+ * @move_to, @move_to_put @erase_pending, @wl_scheduled, @works,
+ * @erroneous, and @erroneous_peb_count fields
* @move_mutex: serializes eraseblock moves
* @work_sem: synchronizes the WL worker with use tasks
* @wl_scheduled: non-zero if the wear-leveling was scheduled
* @bgt_thread: background thread description object
* @thread_enabled: if the background thread is enabled
* @bgt_name: background thread name
+ * @reboot_notifier: notifier to terminate background thread before rebooting
*
* @flash_size: underlying MTD device size (in bytes)
* @peb_count: count of physical eraseblocks on the MTD device
* @peb_size: physical eraseblock size
* @bad_peb_count: count of bad physical eraseblocks
* @good_peb_count: count of good physical eraseblocks
+ * @erroneous_peb_count: count of erroneous physical eraseblocks in @erroneous
+ * @max_erroneous: maximum allowed amount of erroneous physical eraseblocks
* @min_io_size: minimal input/output unit size of the underlying MTD device
* @hdrs_min_io_size: minimal I/O unit size used for VID and EC headers
* @ro_mode: if the UBI device is in read-only mode
* @vid_hdr_shift: contains @vid_hdr_offset - @vid_hdr_aloffset
* @bad_allowed: whether the MTD device admits of bad physical eraseblocks or
* not
+ * @nor_flash: non-zero if working on top of NOR flash
* @mtd: MTD device descriptor
*
* @peb_buf1: a buffer of PEB size used for different purposes
struct ubi_volume *volumes[UBI_MAX_VOLUMES+UBI_INT_VOL_COUNT];
spinlock_t volumes_lock;
int ref_count;
+ int image_seq;
int rsvd_pebs;
int avail_pebs;
/* Wear-leveling sub-system's stuff */
struct rb_root used;
+ struct rb_root erroneous;
struct rb_root free;
struct rb_root scrub;
struct list_head pq[UBI_PROT_QUEUE_LEN];
struct task_struct *bgt_thread;
int thread_enabled;
char bgt_name[sizeof(UBI_BGT_NAME_PATTERN)+2];
+ struct notifier_block reboot_notifier;
/* I/O sub-system's stuff */
long long flash_size;
int peb_size;
int bad_peb_count;
int good_peb_count;
+ int erroneous_peb_count;
+ int max_erroneous;
int min_io_size;
int hdrs_min_io_size;
int ro_mode;
int vid_hdr_offset;
int vid_hdr_aloffset;
int vid_hdr_shift;
- int bad_allowed;
+ unsigned int bad_allowed:1;
+ unsigned int nor_flash:1;
struct mtd_info *mtd;
void *peb_buf1;
extern const struct file_operations ubi_vol_cdev_operations;
extern struct class *ubi_class;
extern struct mutex ubi_devices_mutex;
+extern struct blocking_notifier_head ubi_notifiers;
/* vtbl.c */
int ubi_change_vtbl_record(struct ubi_device *ubi, int idx,
int ubi_check_volume(struct ubi_device *ubi, int vol_id);
void ubi_calculate_reserved(struct ubi_device *ubi);
-/* gluebi.c */
-#ifdef CONFIG_MTD_UBI_GLUEBI
-int ubi_create_gluebi(struct ubi_device *ubi, struct ubi_volume *vol);
-int ubi_destroy_gluebi(struct ubi_volume *vol);
-void ubi_gluebi_updated(struct ubi_volume *vol);
-#else
-#define ubi_create_gluebi(ubi, vol) 0
-#define ubi_destroy_gluebi(vol) 0
-#define ubi_gluebi_updated(vol)
-#endif
-
/* eba.c */
int ubi_eba_unmap_leb(struct ubi_device *ubi, struct ubi_volume *vol,
int lnum);
void ubi_put_device(struct ubi_device *ubi);
struct ubi_device *ubi_get_by_major(int major);
int ubi_major2num(int major);
+int ubi_volume_notify(struct ubi_device *ubi, struct ubi_volume *vol,
+ int ntype);
+int ubi_notify_all(struct ubi_device *ubi, int ntype,
+ struct notifier_block *nb);
+int ubi_enumerate_volumes(struct notifier_block *nb);
+
+/* kapi.c */
+void ubi_do_get_device_info(struct ubi_device *ubi, struct ubi_device_info *di);
+void ubi_do_get_volume_info(struct ubi_device *ubi, struct ubi_volume *vol,
+ struct ubi_volume_info *vi);
/*
* ubi_rb_for_each_entry - walk an RB-tree.
projects / karo-tx-linux.git / blobdiff