net: pch_gbe: Add Kconfig option

[karo-tx-uboot.git] / drivers / net / Kconfig

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index ce76a02da0cefe9c460f30444f9ca33d0ce00c23..bbec6a60e01a42b4411bd6b75d0d5d8fc6ab93ac 100644 (file)
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -8,6 +8,11 @@ config DM_ETH
          This is currently implemented in net/eth.c
          Look in include/net.h for details.
 
+config PHYLIB
+       bool "Ethernet PHY (physical media interface) support"
+       help
+         Enable Ethernet PHY (physical media interface) support.
+
 menuconfig NETDEVICES
        bool "Network device support"
        depends on NET
@@ -20,6 +25,38 @@ menuconfig NETDEVICES
 
 if NETDEVICES
 
+config E1000
+       bool "Intel PRO/1000 Gigabit Ethernet support"
+       help
+         This driver supports Intel(R) PRO/1000 gigabit ethernet family of
+         adapters.  For more information on how to identify your adapter, go
+         to the Adapter & Driver ID Guide at:
+
+         <http://support.intel.com/support/network/adapter/pro100/21397.htm>
+
+config E1000_SPI_GENERIC
+       bool "Allow access to the Intel 8257x SPI bus"
+       depends on E1000
+       help
+         Allow generic access to the SPI bus on the Intel 8257x, for
+         example with the "sspi" command.
+
+config E1000_SPI
+       bool "Enable SPI bus utility code"
+       depends on E1000
+       help
+         Utility code for direct access to the SPI bus on Intel 8257x.
+         This does not do anything useful unless you set at least one
+         of CONFIG_CMD_E1000 or CONFIG_E1000_SPI_GENERIC.
+
+config CMD_E1000
+       bool "Enable the e1000 command"
+       depends on E1000
+       help
+         This enables the 'e1000' management command for E1000 devices. When
+         used on devices with SPI support you can reprogram the EEPROM from
+         U-Boot.
+
 config ETH_SANDBOX
        depends on DM_ETH && SANDBOX
        default y
@@ -47,4 +84,12 @@ config ETH_DESIGNWARE
          100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to
          provide the PHY (physical media interface).
 
+config PCH_GBE
+       bool "Intel Platform Controller Hub EG20T GMAC driver"
+       depends on DM_ETH && DM_PCI
+       select PHYLIB
+       help
+         This MAC is present in Intel Platform Controller Hub EG20T. It
+         supports 10/100/1000 Mbps operation.
+
 endif # NETDEVICES