# Network device configuration
#
-menu "Network device support"
- depends on NET
-
-config NETDEVICES
+menuconfig NETDEVICES
default y if UML
bool "Network device support"
---help---
# Ethernet
#
-menu "Ethernet (10 or 100Mbit)"
- depends on !UML
-
-config NET_ETHERNET
+menuconfig NET_ETHERNET
bool "Ethernet (10 or 100Mbit)"
+ depends on !UML
---help---
Ethernet (also called IEEE 802.3 or ISO 8802-2) is the most common
type of Local Area Network (LAN) in universities and companies.
kernel: saying N will just cause the configurator to skip all
the questions about Ethernet network cards. If unsure, say N.
+if NET_ETHERNET
+
config MII
tristate "Generic Media Independent Interface device support"
- depends on NET_ETHERNET
help
Most ethernet controllers have MII transceiver either as an external
or internal device. It is safe to say Y or M here even if your
config MACB
tristate "Atmel MACB support"
- depends on NET_ETHERNET && (AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263)
+ depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263
select MII
help
The Atmel MACB ethernet interface is found on many AT32 and AT91
source "drivers/net/arm/Kconfig"
+config AX88796
+ tristate "ASIX AX88796 NE2000 clone support"
+ depends on ARM || MIPS
+ select CRC32
+ select MII
+ help
+ AX88796 driver, using platform bus to provide
+ chip detection and resources
+
config MACE
tristate "MACE (Power Mac ethernet) support"
- depends on NET_ETHERNET && PPC_PMAC && PPC32
+ depends on PPC_PMAC && PPC32
select CRC32
help
Power Macintoshes and clones with Ethernet built-in on the
config BMAC
tristate "BMAC (G3 ethernet) support"
- depends on NET_ETHERNET && PPC_PMAC && PPC32
+ depends on PPC_PMAC && PPC32
select CRC32
help
Say Y for support of BMAC Ethernet interfaces. These are used on G3
config ARIADNE
tristate "Ariadne support"
- depends on NET_ETHERNET && ZORRO
+ depends on ZORRO
help
If you have a Village Tronic Ariadne Ethernet adapter, say Y.
Otherwise, say N.
config A2065
tristate "A2065 support"
- depends on NET_ETHERNET && ZORRO
+ depends on ZORRO
select CRC32
help
If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise,
config HYDRA
tristate "Hydra support"
- depends on NET_ETHERNET && ZORRO
+ depends on ZORRO
select CRC32
help
If you have a Hydra Ethernet adapter, say Y. Otherwise, say N.
config ZORRO8390
tristate "Zorro NS8390-based Ethernet support"
- depends on NET_ETHERNET && ZORRO
+ depends on ZORRO
select CRC32
help
This driver is for Zorro Ethernet cards using an NS8390-compatible
config APNE
tristate "PCMCIA NE2000 support"
- depends on NET_ETHERNET && AMIGA_PCMCIA
+ depends on AMIGA_PCMCIA
select CRC32
help
If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise,
config APOLLO_ELPLUS
tristate "Apollo 3c505 support"
- depends on NET_ETHERNET && APOLLO
+ depends on APOLLO
help
Say Y or M here if your Apollo has a 3Com 3c505 ISA Ethernet card.
If you don't have one made for Apollos, you can use one from a PC,
config MAC8390
bool "Macintosh NS 8390 based ethernet cards"
- depends on NET_ETHERNET && MAC
+ depends on MAC
select CRC32
help
If you want to include a driver to support Nubus or LC-PDS
config MAC89x0
tristate "Macintosh CS89x0 based ethernet cards"
- depends on NET_ETHERNET && MAC
+ depends on MAC
---help---
Support for CS89x0 chipset based Ethernet cards. If you have a
Nubus or LC-PDS network (Ethernet) card of this type, say Y and
config MACSONIC
tristate "Macintosh SONIC based ethernet (onboard, NuBus, LC, CS)"
- depends on NET_ETHERNET && MAC
+ depends on MAC
---help---
Support for NatSemi SONIC based Ethernet devices. This includes
the onboard Ethernet in many Quadras as well as some LC-PDS,
config MACMACE
bool "Macintosh (AV) onboard MACE ethernet"
- depends on NET_ETHERNET && MAC
+ depends on MAC
select CRC32
help
Support for the onboard AMD 79C940 MACE Ethernet controller used in
config MVME147_NET
tristate "MVME147 (Lance) Ethernet support"
- depends on NET_ETHERNET && MVME147
+ depends on MVME147
select CRC32
help
Support for the on-board Ethernet interface on the Motorola MVME147
config MVME16x_NET
tristate "MVME16x Ethernet support"
- depends on NET_ETHERNET && MVME16x
+ depends on MVME16x
help
This is the driver for the Ethernet interface on the Motorola
MVME162, 166, 167, 172 and 177 boards. Say Y here to include the
config BVME6000_NET
tristate "BVME6000 Ethernet support"
- depends on NET_ETHERNET && BVME6000
+ depends on BVME6000
help
This is the driver for the Ethernet interface on BVME4000 and
BVME6000 VME boards. Say Y here to include the driver for this chip
config ATARILANCE
tristate "Atari Lance support"
- depends on NET_ETHERNET && ATARI
+ depends on ATARI
help
Say Y to include support for several Atari Ethernet adapters based
on the AMD Lance chipset: RieblCard (with or without battery), or
config ATARI_BIONET
tristate "BioNet-100 support"
- depends on NET_ETHERNET && ATARI && ATARI_ACSI && BROKEN
+ depends on ATARI && ATARI_ACSI && BROKEN
help
Say Y to include support for BioData's BioNet-100 Ethernet adapter
for the ACSI port. The driver works (has to work...) with a polled
config ATARI_PAMSNET
tristate "PAMsNet support"
- depends on NET_ETHERNET && ATARI && ATARI_ACSI && BROKEN
+ depends on ATARI && ATARI_ACSI && BROKEN
help
Say Y to include support for the PAMsNet Ethernet adapter for the
ACSI port ("ACSI node"). The driver works (has to work...) with a
config SUN3LANCE
tristate "Sun3/Sun3x on-board LANCE support"
- depends on NET_ETHERNET && (SUN3 || SUN3X)
+ depends on SUN3 || SUN3X
help
Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80)
featured an AMD Lance 10Mbit Ethernet controller on board; say Y
config SUN3_82586
bool "Sun3 on-board Intel 82586 support"
- depends on NET_ETHERNET && SUN3
+ depends on SUN3
help
This driver enables support for the on-board Intel 82586 based
Ethernet adapter found on Sun 3/1xx and 3/2xx motherboards. Note
config HPLANCE
bool "HP on-board LANCE support"
- depends on NET_ETHERNET && DIO
+ depends on DIO
select CRC32
help
If you want to use the builtin "LANCE" Ethernet controller on an
config LASI_82596
tristate "Lasi ethernet"
- depends on NET_ETHERNET && GSC
+ depends on GSC
help
Say Y here to support the builtin Intel 82596 ethernet controller
found in Hewlett-Packard PA-RISC machines with 10Mbit ethernet.
+config SNI_82596
+ tristate "SNI RM ethernet"
+ depends on NET_ETHERNET && SNI_RM
+ help
+ Say Y here to support the on-board Intel 82596 ethernet controller
+ built into SNI RM machines.
+
config MIPS_JAZZ_SONIC
tristate "MIPS JAZZ onboard SONIC Ethernet support"
- depends on NET_ETHERNET && MACH_JAZZ
+ depends on MACH_JAZZ
help
This is the driver for the onboard card of MIPS Magnum 4000,
Acer PICA, Olivetti M700-10 and a few other identical OEM systems.
config MIPS_AU1X00_ENET
bool "MIPS AU1000 Ethernet support"
- depends on NET_ETHERNET && SOC_AU1X00
+ depends on SOC_AU1X00
select PHYLIB
select CRC32
help
config NET_SB1250_MAC
tristate "SB1250 Ethernet support"
- depends on NET_ETHERNET && SIBYTE_SB1xxx_SOC
+ depends on SIBYTE_SB1xxx_SOC
config SGI_IOC3_ETH
bool "SGI IOC3 Ethernet"
- depends on NET_ETHERNET && PCI && SGI_IP27
+ depends on PCI && SGI_IP27
select CRC32
select MII
help
config MIPS_SIM_NET
tristate "MIPS simulator Network device"
- depends on NET_ETHERNET && MIPS_SIM
+ depends on MIPS_SIM
help
The MIPSNET device is a simple Ethernet network device which is
emulated by the MIPS Simulator.
config SGI_O2MACE_ETH
tristate "SGI O2 MACE Fast Ethernet support"
- depends on NET_ETHERNET && SGI_IP32=y
+ depends on SGI_IP32=y
config STNIC
tristate "National DP83902AV support"
- depends on NET_ETHERNET && SUPERH
+ depends on SUPERH
select CRC32
help
Support for cards based on the National Semiconductor DP83902AV
config SUNLANCE
tristate "Sun LANCE support"
- depends on NET_ETHERNET && SBUS
+ depends on SBUS
select CRC32
help
This driver supports the "le" interface present on all 32-bit Sparc
config HAPPYMEAL
tristate "Sun Happy Meal 10/100baseT support"
- depends on NET_ETHERNET && (SBUS || PCI)
+ depends on SBUS || PCI
select CRC32
help
This driver supports the "hme" interface present on most Ultra
config SUNBMAC
tristate "Sun BigMAC 10/100baseT support (EXPERIMENTAL)"
- depends on NET_ETHERNET && SBUS && EXPERIMENTAL
+ depends on SBUS && EXPERIMENTAL
select CRC32
help
This driver supports the "be" interface available as an Sbus option.
config SUNQE
tristate "Sun QuadEthernet support"
- depends on NET_ETHERNET && SBUS
+ depends on SBUS
select CRC32
help
This driver supports the "qe" 10baseT Ethernet device, available as
config SUNGEM
tristate "Sun GEM support"
- depends on NET_ETHERNET && PCI
+ depends on PCI
select CRC32
help
Support for the Sun GEM chip, aka Sun GigabitEthernet/P 2.0. See also
config CASSINI
tristate "Sun Cassini support"
- depends on NET_ETHERNET && PCI
+ depends on PCI
select CRC32
help
Support for the Sun Cassini chip, aka Sun GigaSwift Ethernet. See also
config NET_VENDOR_3COM
bool "3COM cards"
- depends on NET_ETHERNET && (ISA || EISA || MCA || PCI)
+ depends on ISA || EISA || MCA || PCI
help
If you have a network (Ethernet) card belonging to this class, say Y
and read the Ethernet-HOWTO, available from
config LANCE
tristate "AMD LANCE and PCnet (AT1500 and NE2100) support"
- depends on NET_ETHERNET && ISA && ISA_DMA_API
+ depends on ISA && ISA_DMA_API
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
config NET_VENDOR_SMC
bool "Western Digital/SMC cards"
- depends on NET_ETHERNET && (ISA || MCA || EISA || MAC)
+ depends on ISA || MCA || EISA || MAC
help
If you have a network (Ethernet) card belonging to this class, say Y
and read the Ethernet-HOWTO, available from
<file:Documentation/networking/net-modules.txt>. The module
will be called smc-ultra32.
+config SMC9194
+ tristate "SMC 9194 support"
+ depends on NET_VENDOR_SMC && (ISA || MAC && BROKEN)
+ select CRC32
+ ---help---
+ This is support for the SMC9xxx based Ethernet cards. Choose this
+ option if you have a DELL laptop with the docking station, or
+ another SMC9192/9194 based chipset. Say Y if you want it compiled
+ into the kernel, and read the file
+ <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
+ available from <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module
+ will be called smc9194.
+
config SMC91X
tristate "SMC 91C9x/91C1xxx support"
select CRC32
select MII
- depends on NET_ETHERNET && (ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || SOC_AU1X00 || BFIN)
+ depends on ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || SOC_AU1X00 || BFIN
help
This is a driver for SMC's 91x series of Ethernet chipsets,
including the SMC91C94 and the SMC91C111. Say Y if you want it
module, say M here and read <file:Documentation/kbuild/modules.txt>
as well as <file:Documentation/networking/net-modules.txt>.
-config SMC9194
- tristate "SMC 9194 support"
- depends on NET_VENDOR_SMC && (ISA || MAC && BROKEN)
- select CRC32
- ---help---
- This is support for the SMC9xxx based Ethernet cards. Choose this
- option if you have a DELL laptop with the docking station, or
- another SMC9192/9194 based chipset. Say Y if you want it compiled
- into the kernel, and read the file
- <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
- available from <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module
- will be called smc9194.
-
config NET_NETX
tristate "NetX Ethernet support"
select MII
- depends on NET_ETHERNET && ARCH_NETX
+ depends on ARCH_NETX
help
This is support for the Hilscher netX builtin Ethernet ports
config DM9000
tristate "DM9000 support"
- depends on (ARM || MIPS) && NET_ETHERNET
+ depends on ARM || MIPS
select CRC32
select MII
---help---
tristate "SMSC LAN911[5678] support"
select CRC32
select MII
- depends on NET_ETHERNET && ARCH_PXA
+ depends on ARCH_PXA
help
This is a driver for SMSC's LAN911x series of Ethernet chipsets
including the new LAN9115, LAN9116, LAN9117, and LAN9118.
config NET_VENDOR_RACAL
bool "Racal-Interlan (Micom) NI cards"
- depends on NET_ETHERNET && ISA
+ depends on ISA
help
If you have a network (Ethernet) card belonging to this class, such
as the NI5010, NI5210 or NI6210, say Y and read the Ethernet-HOWTO,
config AT1700
tristate "AT1700/1720 support (EXPERIMENTAL)"
- depends on NET_ETHERNET && (ISA || MCA_LEGACY) && EXPERIMENTAL
+ depends on (ISA || MCA_LEGACY) && EXPERIMENTAL
select CRC32
---help---
If you have a network (Ethernet) card of this type, say Y and read
config DEPCA
tristate "DEPCA, DE10x, DE200, DE201, DE202, DE422 support"
- depends on NET_ETHERNET && (ISA || EISA || MCA)
+ depends on ISA || EISA || MCA
select CRC32
---help---
If you have a network (Ethernet) card of this type, say Y and read
config HP100
tristate "HP 10/100VG PCLAN (ISA, EISA, PCI) support"
- depends on NET_ETHERNET && (ISA || EISA || PCI)
+ depends on ISA || EISA || PCI
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
config NET_ISA
bool "Other ISA cards"
- depends on NET_ETHERNET && ISA
+ depends on ISA
---help---
If your network (Ethernet) card hasn't been mentioned yet and its
bus system (that's the way the cards talks to the other components
config NE2_MCA
tristate "NE/2 (ne2000 MCA version) support"
- depends on NET_ETHERNET && MCA_LEGACY
+ depends on MCA_LEGACY
select CRC32
help
If you have a network (Ethernet) card of this type, say Y and read
config IBMLANA
tristate "IBM LAN Adapter/A support"
- depends on NET_ETHERNET && MCA && MCA_LEGACY
+ depends on MCA && MCA_LEGACY
---help---
This is a Micro Channel Ethernet adapter. You need to set
CONFIG_MCA to use this driver. It is both available as an in-kernel
config IBMVETH
tristate "IBM LAN Virtual Ethernet support"
- depends on NET_ETHERNET && PPC_PSERIES
+ depends on PPC_PSERIES
---help---
This driver supports virtual ethernet adapters on newer IBM iSeries
and pSeries systems.
config IBM_EMAC
tristate "PowerPC 4xx on-chip Ethernet support"
- depends on 4xx
+ depends on 4xx && !PPC_MERGE
help
This driver supports the PowerPC 4xx EMAC family of on-chip
Ethernet controllers.
config NET_PCI
bool "EISA, VLB, PCI and on board controllers"
- depends on NET_ETHERNET && (ISA || EISA || PCI)
+ depends on ISA || EISA || PCI
help
This is another class of network cards which attach directly to the
bus. If you have one of those, say Y and read the Ethernet-HOWTO,
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module
will be called amd8111e.
+
config AMD8111E_NAPI
bool "Enable NAPI support"
depends on AMD8111_ETH
config NET_POCKET
bool "Pocket and portable adapters"
- depends on NET_ETHERNET && PARPORT
+ depends on PARPORT
---help---
Cute little network (Ethernet) devices which attach to the parallel
port ("pocket adapters"), commonly used with laptops. If you have
config SGISEEQ
tristate "SGI Seeq ethernet controller support"
- depends on NET_ETHERNET && SGI_IP22
+ depends on SGI_IP22
help
Say Y here if you have an Seeq based Ethernet network card. This is
used in many Silicon Graphics machines.
config DECLANCE
tristate "DEC LANCE ethernet controller support"
- depends on NET_ETHERNET && MACH_DECSTATION
+ depends on MACH_DECSTATION
select CRC32
help
This driver is for the series of Ethernet controllers produced by
config NE_H8300
tristate "NE2000 compatible support for H8/300"
- depends on H8300 && NET_ETHERNET
+ depends on H8300
help
Say Y here if you want to use the NE2000 compatible
controller on the Renesas H8/300 processor.
source "drivers/net/fec_8xx/Kconfig"
source "drivers/net/fs_enet/Kconfig"
-endmenu
+endif # NET_ETHERNET
#
# Gigabit Ethernet
with better performance and more complete ethtool support.
It does not support the link failover and network management
- features that "portable" vendor supplied sk98lin driver does.
+ features available in the hardware.
This driver supports adapters based on the original Yukon chipset:
Marvell 88E8001, Belkin F5D5005, CNet GigaCard, DLink DGE-530T,
will be called skge. This is recommended.
config SKY2
- tristate "SysKonnect Yukon2 support (EXPERIMENTAL)"
+ tristate "SysKonnect Yukon2 support"
depends on PCI
select CRC32
---help---
To compile this driver as a module, choose M here: the module
will be called sky2. This is recommended.
-config SK98LIN
- tristate "Marvell Yukon Chipset / SysKonnect SK-98xx Support (DEPRECATED)"
- depends on PCI
- ---help---
- Say Y here if you have a Marvell Yukon or SysKonnect SK-98xx/SK-95xx
- compliant Gigabit Ethernet Adapter.
-
- This driver supports the original Yukon chipset. This driver is
- deprecated and will be removed from the kernel in the near future,
- it has been replaced by the skge driver. skge is cleaner and
- seems to work better.
+config SKY2_DEBUG
+ bool "Debugging interface"
+ depends on SKY2 && DEBUG_FS
+ help
+ This option adds the ability to dump driver state for debugging.
+ The file debugfs/sky2/ethX displays the state of the internal
+ transmit and receive rings.
- This driver does not support the newer Yukon2 chipset. A separate
- driver, sky2, is provided to support Yukon2-based adapters.
-
- The following adapters are supported by this driver:
- - 3Com 3C940 Gigabit LOM Ethernet Adapter
- - 3Com 3C941 Gigabit LOM Ethernet Adapter
- - Allied Telesyn AT-2970LX Gigabit Ethernet Adapter
- - Allied Telesyn AT-2970LX/2SC Gigabit Ethernet Adapter
- - Allied Telesyn AT-2970SX Gigabit Ethernet Adapter
- - Allied Telesyn AT-2970SX/2SC Gigabit Ethernet Adapter
- - Allied Telesyn AT-2970TX Gigabit Ethernet Adapter
- - Allied Telesyn AT-2970TX/2TX Gigabit Ethernet Adapter
- - Allied Telesyn AT-2971SX Gigabit Ethernet Adapter
- - Allied Telesyn AT-2971T Gigabit Ethernet Adapter
- - Belkin Gigabit Desktop Card 10/100/1000Base-T Adapter, Copper RJ-45
- - EG1032 v2 Instant Gigabit Network Adapter
- - EG1064 v2 Instant Gigabit Network Adapter
- - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Abit)
- - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Albatron)
- - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Asus)
- - Marvell 88E8001 Gigabit LOM Ethernet Adapter (ECS)
- - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Epox)
- - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Foxconn)
- - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Gigabyte)
- - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Iwill)
- - Marvell 88E8050 Gigabit LOM Ethernet Adapter (Intel)
- - Marvell RDK-8001 Adapter
- - Marvell RDK-8002 Adapter
- - Marvell RDK-8003 Adapter
- - Marvell RDK-8004 Adapter
- - Marvell RDK-8006 Adapter
- - Marvell RDK-8007 Adapter
- - Marvell RDK-8008 Adapter
- - Marvell RDK-8009 Adapter
- - Marvell RDK-8010 Adapter
- - Marvell RDK-8011 Adapter
- - Marvell RDK-8012 Adapter
- - Marvell RDK-8052 Adapter
- - Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (32 bit)
- - Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (64 bit)
- - N-Way PCI-Bus Giga-Card 1000/100/10Mbps(L)
- - SK-9521 10/100/1000Base-T Adapter
- - SK-9521 V2.0 10/100/1000Base-T Adapter
- - SK-9821 Gigabit Ethernet Server Adapter (SK-NET GE-T)
- - SK-9821 V2.0 Gigabit Ethernet 10/100/1000Base-T Adapter
- - SK-9822 Gigabit Ethernet Server Adapter (SK-NET GE-T dual link)
- - SK-9841 Gigabit Ethernet Server Adapter (SK-NET GE-LX)
- - SK-9841 V2.0 Gigabit Ethernet 1000Base-LX Adapter
- - SK-9842 Gigabit Ethernet Server Adapter (SK-NET GE-LX dual link)
- - SK-9843 Gigabit Ethernet Server Adapter (SK-NET GE-SX)
- - SK-9843 V2.0 Gigabit Ethernet 1000Base-SX Adapter
- - SK-9844 Gigabit Ethernet Server Adapter (SK-NET GE-SX dual link)
- - SK-9851 V2.0 Gigabit Ethernet 1000Base-SX Adapter
- - SK-9861 Gigabit Ethernet Server Adapter (SK-NET GE-SX Volition)
- - SK-9861 V2.0 Gigabit Ethernet 1000Base-SX Adapter
- - SK-9862 Gigabit Ethernet Server Adapter (SK-NET GE-SX Volition dual link)
- - SK-9871 Gigabit Ethernet Server Adapter (SK-NET GE-ZX)
- - SK-9871 V2.0 Gigabit Ethernet 1000Base-ZX Adapter
- - SK-9872 Gigabit Ethernet Server Adapter (SK-NET GE-ZX dual link)
- - SMC EZ Card 1000 (SMC9452TXV.2)
-
- The adapters support Jumbo Frames.
- The dual link adapters support link-failover and dual port features.
- Both Marvell Yukon and SysKonnect SK-98xx/SK-95xx adapters support
- the scatter-gather functionality with sendfile(). Please refer to
- <file:Documentation/networking/sk98lin.txt> for more information about
- optional driver parameters.
- Questions concerning this driver may be addressed to:
- <linux@syskonnect.de>
-
- If you want to compile this driver as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/kbuild/modules.txt>. The module will
- be called sk98lin. This is recommended.
+ If unsure, say N.
config VIA_VELOCITY
tristate "VIA Velocity support"
- depends on NET_PCI && PCI
+ depends on PCI
select CRC32
select CRC_CCITT
select MII
To compile this driver as a module, choose M here: the module
will be called tsi108_eth.
+config GELIC_NET
+ tristate "PS3 Gigabit Ethernet driver"
+ depends on PPC_PS3
+ help
+ This driver supports the network device on the PS3 game
+ console. This driver has built-in support for Ethernet.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ps3_gelic.
+
config GIANFAR
tristate "Gianfar Ethernet"
depends on 85xx || 83xx || PPC_86xx
config UCC_GETH
tristate "Freescale QE Gigabit Ethernet"
depends on QUICC_ENGINE
- select UCC_FAST
+ select PHYLIB
help
This driver supports the Gigabit Ethernet mode of the QUICC Engine,
which is available on some Freescale SOCs.
If you want to log kernel messages over the network, enable this.
See <file:Documentation/networking/netconsole.txt> for details.
-endif #NETDEVICES
-
config NETPOLL
def_bool NETCONSOLE
config NET_POLL_CONTROLLER
def_bool NETPOLL
-endmenu
+endif # NETDEVICES