]> git.karo-electronics.de Git - karo-tx-linux.git/blobdiff - drivers/net/bnx2.c
bnx2x: convert to net_device_ops
[karo-tx-linux.git] / drivers / net / bnx2.c
index 84563b0b660eb57a56a8a12c2ebbe9198b37714c..8f1cd7cfa09dd4cfa47356af87bdb64d4a0e0f22 100644 (file)
@@ -57,8 +57,8 @@
 
 #define DRV_MODULE_NAME                "bnx2"
 #define PFX DRV_MODULE_NAME    ": "
-#define DRV_MODULE_VERSION     "1.8.1"
-#define DRV_MODULE_RELDATE     "Oct 7, 2008"
+#define DRV_MODULE_VERSION     "1.8.2"
+#define DRV_MODULE_RELDATE     "Nov 10, 2008"
 
 #define RUN_AT(x) (jiffies + (x))
 
@@ -7215,10 +7215,13 @@ static void
 poll_bnx2(struct net_device *dev)
 {
        struct bnx2 *bp = netdev_priv(dev);
+       int i;
 
-       disable_irq(bp->pdev->irq);
-       bnx2_interrupt(bp->pdev->irq, dev);
-       enable_irq(bp->pdev->irq);
+       for (i = 0; i < bp->irq_nvecs; i++) {
+               disable_irq(bp->irq_tbl[i].vector);
+               bnx2_interrupt(bp->irq_tbl[i].vector, &bp->bnx2_napi[i]);
+               enable_irq(bp->irq_tbl[i].vector);
+       }
 }
 #endif
 
@@ -7704,6 +7707,25 @@ bnx2_init_napi(struct bnx2 *bp)
        }
 }
 
+static const struct net_device_ops bnx2_netdev_ops = {
+       .ndo_open               = bnx2_open,
+       .ndo_start_xmit         = bnx2_start_xmit,
+       .ndo_stop               = bnx2_close,
+       .ndo_get_stats          = bnx2_get_stats,
+       .ndo_set_rx_mode        = bnx2_set_rx_mode,
+       .ndo_do_ioctl           = bnx2_ioctl,
+       .ndo_validate_addr      = eth_validate_addr,
+       .ndo_set_mac_address    = bnx2_change_mac_addr,
+       .ndo_change_mtu         = bnx2_change_mtu,
+       .ndo_tx_timeout         = bnx2_tx_timeout,
+#ifdef BCM_VLAN
+       .ndo_vlan_rx_register   = bnx2_vlan_rx_register,
+#endif
+#if defined(HAVE_POLL_CONTROLLER) || defined(CONFIG_NET_POLL_CONTROLLER)
+       .ndo_poll_controller    = poll_bnx2,
+#endif
+};
+
 static int __devinit
 bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
@@ -7728,28 +7750,13 @@ bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
                return rc;
        }
 
-       dev->open = bnx2_open;
-       dev->hard_start_xmit = bnx2_start_xmit;
-       dev->stop = bnx2_close;
-       dev->get_stats = bnx2_get_stats;
-       dev->set_rx_mode = bnx2_set_rx_mode;
-       dev->do_ioctl = bnx2_ioctl;
-       dev->set_mac_address = bnx2_change_mac_addr;
-       dev->change_mtu = bnx2_change_mtu;
-       dev->tx_timeout = bnx2_tx_timeout;
+       dev->netdev_ops = &bnx2_netdev_ops;
        dev->watchdog_timeo = TX_TIMEOUT;
-#ifdef BCM_VLAN
-       dev->vlan_rx_register = bnx2_vlan_rx_register;
-#endif
        dev->ethtool_ops = &bnx2_ethtool_ops;
 
        bp = netdev_priv(dev);
        bnx2_init_napi(bp);
 
-#if defined(HAVE_POLL_CONTROLLER) || defined(CONFIG_NET_POLL_CONTROLLER)
-       dev->poll_controller = poll_bnx2;
-#endif
-
        pci_set_drvdata(pdev, dev);
 
        memcpy(dev->dev_addr, bp->mac_addr, 6);