err = pci_enable_device(pdev);
} else {
bars = pci_select_bars(pdev, IORESOURCE_MEM);
- err = pci_enable_device(pdev);
+ err = pci_enable_device_mem(pdev);
}
if (err)
return err;
if (pci_using_dac)
netdev->features |= NETIF_F_HIGHDMA;
- netdev->features |= NETIF_F_LLTX;
-
netdev->vlan_features |= NETIF_F_TSO;
netdev->vlan_features |= NETIF_F_TSO6;
netdev->vlan_features |= NETIF_F_HW_CSUM;
return -ENOMEM;
}
- spin_lock_init(&adapter->tx_queue_lock);
-
/* Explicitly disable IRQ since the NIC can be in any state. */
e1000_irq_disable(adapter);
txdr->next_to_use = 0;
txdr->next_to_clean = 0;
- spin_lock_init(&txdr->tx_lock);
return 0;
}
* e1000_setup_rctl - configure the receive control registers
* @adapter: Board private structure
**/
-#define PAGE_USE_COUNT(S) (((S) >> PAGE_SHIFT) + \
- (((S) & (PAGE_SIZE - 1)) ? 1 : 0))
static void e1000_setup_rctl(struct e1000_adapter *adapter)
{
struct e1000_hw *hw = &adapter->hw;
return false;
switch (skb->protocol) {
- case __constant_htons(ETH_P_IP):
+ case cpu_to_be16(ETH_P_IP):
if (ip_hdr(skb)->protocol == IPPROTO_TCP)
cmd_len |= E1000_TXD_CMD_TCP;
break;
- case __constant_htons(ETH_P_IPV6):
+ case cpu_to_be16(ETH_P_IPV6):
/* XXX not handling all IPV6 headers */
if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP)
cmd_len |= E1000_TXD_CMD_TCP;
unsigned int max_txd_pwr = E1000_MAX_TXD_PWR;
unsigned int tx_flags = 0;
unsigned int len = skb->len - skb->data_len;
- unsigned long flags;
unsigned int nr_frags;
unsigned int mss;
int count = 0;
(hw->mac_type == e1000_82573))
e1000_transfer_dhcp_info(adapter, skb);
- if (!spin_trylock_irqsave(&tx_ring->tx_lock, flags))
- /* Collision - tell upper layer to requeue */
- return NETDEV_TX_LOCKED;
-
/* need: count + 2 desc gap to keep tail from touching
* head, otherwise try next time */
- if (unlikely(e1000_maybe_stop_tx(netdev, tx_ring, count + 2))) {
- spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
+ if (unlikely(e1000_maybe_stop_tx(netdev, tx_ring, count + 2)))
return NETDEV_TX_BUSY;
- }
if (unlikely(hw->mac_type == e1000_82547)) {
if (unlikely(e1000_82547_fifo_workaround(adapter, skb))) {
netif_stop_queue(netdev);
mod_timer(&adapter->tx_fifo_stall_timer, jiffies + 1);
- spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
return NETDEV_TX_BUSY;
}
}
tso = e1000_tso(adapter, tx_ring, skb);
if (tso < 0) {
dev_kfree_skb_any(skb);
- spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
return NETDEV_TX_OK;
}
/* Make sure there is space in the ring for the next send. */
e1000_maybe_stop_tx(netdev, tx_ring, MAX_SKB_FRAGS + 2);
- spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
return NETDEV_TX_OK;
}
mod_timer(&adapter->watchdog_timer, jiffies + 1);
}
- if (likely(netif_rx_schedule_prep(&adapter->napi))) {
+ if (likely(napi_schedule_prep(&adapter->napi))) {
adapter->total_tx_bytes = 0;
adapter->total_tx_packets = 0;
adapter->total_rx_bytes = 0;
adapter->total_rx_packets = 0;
- __netif_rx_schedule(&adapter->napi);
+ __napi_schedule(&adapter->napi);
} else
e1000_irq_enable(adapter);
ew32(IMC, ~0);
E1000_WRITE_FLUSH();
}
- if (likely(netif_rx_schedule_prep(&adapter->napi))) {
+ if (likely(napi_schedule_prep(&adapter->napi))) {
adapter->total_tx_bytes = 0;
adapter->total_tx_packets = 0;
adapter->total_rx_bytes = 0;
adapter->total_rx_packets = 0;
- __netif_rx_schedule(&adapter->napi);
+ __napi_schedule(&adapter->napi);
} else
/* this really should not happen! if it does it is basically a
* bug, but not a hard error, so enable ints and continue */
adapter = netdev_priv(poll_dev);
- /* e1000_clean is called per-cpu. This lock protects
- * tx_ring[0] from being cleaned by multiple cpus
- * simultaneously. A failure obtaining the lock means
- * tx_ring[0] is currently being cleaned anyway. */
- if (spin_trylock(&adapter->tx_queue_lock)) {
- tx_cleaned = e1000_clean_tx_irq(adapter,
- &adapter->tx_ring[0]);
- spin_unlock(&adapter->tx_queue_lock);
- }
+ tx_cleaned = e1000_clean_tx_irq(adapter, &adapter->tx_ring[0]);
adapter->clean_rx(adapter, &adapter->rx_ring[0],
&work_done, budget);
if (work_done < budget) {
if (likely(adapter->itr_setting & 3))
e1000_set_itr(adapter);
- netif_rx_complete(napi);
+ napi_complete(napi);
e1000_irq_enable(adapter);
}