u16 frag_size, pages;
#ifdef BNX2X_STOP_ON_ERROR
/* sanity check */
- if (fp->disable_tpa &&
+ if (fp->mode == TPA_MODE_DISABLED &&
(CQE_TYPE_START(cqe_fp_type) ||
CQE_TYPE_STOP(cqe_fp_type)))
- BNX2X_ERR("START/STOP packet while disable_tpa type %x\n",
+ BNX2X_ERR("START/STOP packet while TPA disabled, type %x\n",
CQE_TYPE(cqe_fp_type));
#endif
DP(NETIF_MSG_IFUP,
"mtu %d rx_buf_size %d\n", bp->dev->mtu, fp->rx_buf_size);
- if (!fp->disable_tpa) {
+ if (fp->mode != TPA_MODE_DISABLED) {
/* Fill the per-aggregation pool */
for (i = 0; i < MAX_AGG_QS(bp); i++) {
struct bnx2x_agg_info *tpa_info =
BNX2X_ERR("Failed to allocate TPA skb pool for queue[%d] - disabling TPA on this queue!\n",
j);
bnx2x_free_tpa_pool(bp, fp, i);
- fp->disable_tpa = 1;
+ fp->mode = TPA_MODE_DISABLED;
break;
}
dma_unmap_addr_set(first_buf, mapping, 0);
ring_prod);
bnx2x_free_tpa_pool(bp, fp,
MAX_AGG_QS(bp));
- fp->disable_tpa = 1;
+ fp->mode = TPA_MODE_DISABLED;
ring_prod = 0;
break;
}
bnx2x_free_rx_bds(fp);
- if (!fp->disable_tpa)
+ if (fp->mode != TPA_MODE_DISABLED)
bnx2x_free_tpa_pool(bp, fp, MAX_AGG_QS(bp));
}
}
/* set the tpa flag for each queue. The tpa flag determines the queue
* minimal size so it must be set prior to queue memory allocation
*/
- fp->disable_tpa = !(bp->flags & TPA_ENABLE_FLAG ||
- (bp->flags & GRO_ENABLE_FLAG &&
- bnx2x_mtu_allows_gro(bp->dev->mtu)));
- if (bp->flags & TPA_ENABLE_FLAG)
+ if (bp->dev->features & NETIF_F_LRO)
fp->mode = TPA_MODE_LRO;
- else if (bp->flags & GRO_ENABLE_FLAG)
+ else if (bp->dev->features & NETIF_F_GRO &&
+ bnx2x_mtu_allows_gro(bp->dev->mtu))
fp->mode = TPA_MODE_GRO;
+ else
+ fp->mode = TPA_MODE_DISABLED;
- /* We don't want TPA on an FCoE L2 ring */
- if (IS_FCOE_FP(fp))
- fp->disable_tpa = 1;
+ /* We don't want TPA if it's disabled in bp
+ * or if this is an FCoE L2 ring.
+ */
+ if (bp->disable_tpa || IS_FCOE_FP(fp))
+ fp->mode = TPA_MODE_DISABLED;
}
int bnx2x_load_cnic(struct bnx2x *bp)
/*
* Zero fastpath structures preserving invariants like napi, which are
* allocated only once, fp index, max_cos, bp pointer.
- * Also set fp->disable_tpa and txdata_ptr.
+ * Also set fp->mode and txdata_ptr.
*/
DP(NETIF_MSG_IFUP, "num queues: %d", bp->num_queues);
for_each_queue(bp, i)
if ((bp->state == BNX2X_STATE_CLOSED) ||
(bp->state == BNX2X_STATE_ERROR) ||
- (bp->flags & (TPA_ENABLE_FLAG | GRO_ENABLE_FLAG)))
+ (bp->dev->features & (NETIF_F_LRO | NETIF_F_GRO)))
return LL_FLUSH_FAILED;
if (!bnx2x_fp_lock_poll(fp))
* In these cases we disable the queue
* Min size is different for OOO, TPA and non-TPA queues
*/
- if (ring_size < (fp->disable_tpa ?
+ if (ring_size < (fp->mode == TPA_MODE_DISABLED ?
MIN_RX_SIZE_NONTPA : MIN_RX_SIZE_TPA)) {
/* release memory allocated for this queue */
bnx2x_free_fp_mem_at(bp, index);
{
struct bnx2x *bp = netdev_priv(dev);
+ if (pci_num_vf(bp->pdev)) {
+ DP(BNX2X_MSG_IOV, "VFs are enabled, can not change MTU\n");
+ return -EPERM;
+ }
+
if (bp->recovery_state != BNX2X_RECOVERY_DONE) {
BNX2X_ERR("Can't perform change MTU during parity recovery\n");
return -EAGAIN;
{
struct bnx2x *bp = netdev_priv(dev);
+ if (pci_num_vf(bp->pdev)) {
+ netdev_features_t changed = dev->features ^ features;
+
+ /* Revert the requested changes in features if they
+ * would require internal reload of PF in bnx2x_set_features().
+ */
+ if (!(features & NETIF_F_RXCSUM) && !bp->disable_tpa) {
+ features &= ~NETIF_F_RXCSUM;
+ features |= dev->features & NETIF_F_RXCSUM;
+ }
+
+ if (changed & NETIF_F_LOOPBACK) {
+ features &= ~NETIF_F_LOOPBACK;
+ features |= dev->features & NETIF_F_LOOPBACK;
+ }
+ }
+
/* TPA requires Rx CSUM offloading */
if (!(features & NETIF_F_RXCSUM)) {
features &= ~NETIF_F_LRO;
features &= ~NETIF_F_GRO;
}
- /* Note: do not disable SW GRO in kernel when HW GRO is off */
- if (bp->disable_tpa)
- features &= ~NETIF_F_LRO;
-
return features;
}
int bnx2x_set_features(struct net_device *dev, netdev_features_t features)
{
struct bnx2x *bp = netdev_priv(dev);
- u32 flags = bp->flags;
- u32 changes;
+ netdev_features_t changes = features ^ dev->features;
bool bnx2x_reload = false;
+ int rc;
- if (features & NETIF_F_LRO)
- flags |= TPA_ENABLE_FLAG;
- else
- flags &= ~TPA_ENABLE_FLAG;
-
- if (features & NETIF_F_GRO)
- flags |= GRO_ENABLE_FLAG;
- else
- flags &= ~GRO_ENABLE_FLAG;
-
- if (features & NETIF_F_LOOPBACK) {
- if (bp->link_params.loopback_mode != LOOPBACK_BMAC) {
- bp->link_params.loopback_mode = LOOPBACK_BMAC;
- bnx2x_reload = true;
- }
- } else {
- if (bp->link_params.loopback_mode != LOOPBACK_NONE) {
- bp->link_params.loopback_mode = LOOPBACK_NONE;
- bnx2x_reload = true;
+ /* VFs or non SRIOV PFs should be able to change loopback feature */
+ if (!pci_num_vf(bp->pdev)) {
+ if (features & NETIF_F_LOOPBACK) {
+ if (bp->link_params.loopback_mode != LOOPBACK_BMAC) {
+ bp->link_params.loopback_mode = LOOPBACK_BMAC;
+ bnx2x_reload = true;
+ }
+ } else {
+ if (bp->link_params.loopback_mode != LOOPBACK_NONE) {
+ bp->link_params.loopback_mode = LOOPBACK_NONE;
+ bnx2x_reload = true;
+ }
}
}
- changes = flags ^ bp->flags;
-
/* if GRO is changed while LRO is enabled, don't force a reload */
- if ((changes & GRO_ENABLE_FLAG) && (flags & TPA_ENABLE_FLAG))
- changes &= ~GRO_ENABLE_FLAG;
+ if ((changes & NETIF_F_GRO) && (features & NETIF_F_LRO))
+ changes &= ~NETIF_F_GRO;
/* if GRO is changed while HW TPA is off, don't force a reload */
- if ((changes & GRO_ENABLE_FLAG) && bp->disable_tpa)
- changes &= ~GRO_ENABLE_FLAG;
+ if ((changes & NETIF_F_GRO) && bp->disable_tpa)
+ changes &= ~NETIF_F_GRO;
if (changes)
bnx2x_reload = true;
- bp->flags = flags;
-
if (bnx2x_reload) {
- if (bp->recovery_state == BNX2X_RECOVERY_DONE)
- return bnx2x_reload_if_running(dev);
+ if (bp->recovery_state == BNX2X_RECOVERY_DONE) {
+ dev->features = features;
+ rc = bnx2x_reload_if_running(dev);
+ return rc ? rc : 1;
+ }
/* else: bnx2x_nic_load() will be called at end of recovery */
}
projects / karo-tx-linux.git / blobdiff