static int i40evf_get_settings(struct net_device *netdev,
struct ethtool_cmd *ecmd)
{
- /* In the future the VF will be able to query the PF for
- * some information - for now use a dummy value
- */
+ struct i40evf_adapter *adapter = netdev_priv(netdev);
+
ecmd->supported = 0;
ecmd->autoneg = AUTONEG_DISABLE;
ecmd->transceiver = XCVR_DUMMY1;
ecmd->port = PORT_NONE;
+ /* Set speed and duplex */
+ switch (adapter->link_speed) {
+ case I40E_LINK_SPEED_40GB:
+ ethtool_cmd_speed_set(ecmd, SPEED_40000);
+ break;
+ case I40E_LINK_SPEED_20GB:
+ ethtool_cmd_speed_set(ecmd, SPEED_20000);
+ break;
+ case I40E_LINK_SPEED_10GB:
+ ethtool_cmd_speed_set(ecmd, SPEED_10000);
+ break;
+ case I40E_LINK_SPEED_1GB:
+ ethtool_cmd_speed_set(ecmd, SPEED_1000);
+ break;
+ case I40E_LINK_SPEED_100MB:
+ ethtool_cmd_speed_set(ecmd, SPEED_100);
+ break;
+ default:
+ break;
+ }
+ ecmd->duplex = DUPLEX_FULL;
return 0;
}
}
/**
- * i40evf_get_coalesce - Get interrupt coalescing settings
- * @netdev: network interface device structure
- * @ec: ethtool coalesce structure
+ * __i40evf_get_coalesce - get per-queue coalesce settings
+ * @netdev: the netdev to check
+ * @ec: ethtool coalesce data structure
+ * @queue: which queue to pick
*
- * Returns current coalescing settings. This is referred to elsewhere in the
- * driver as Interrupt Throttle Rate, as this is how the hardware describes
- * this functionality.
+ * Gets the per-queue settings for coalescence. Specifically Rx and Tx usecs
+ * are per queue. If queue is <0 then we default to queue 0 as the
+ * representative value.
**/
-static int i40evf_get_coalesce(struct net_device *netdev,
- struct ethtool_coalesce *ec)
+static int __i40evf_get_coalesce(struct net_device *netdev,
+ struct ethtool_coalesce *ec,
+ int queue)
{
struct i40evf_adapter *adapter = netdev_priv(netdev);
struct i40e_vsi *vsi = &adapter->vsi;
+ struct i40e_ring *rx_ring, *tx_ring;
ec->tx_max_coalesced_frames = vsi->work_limit;
ec->rx_max_coalesced_frames = vsi->work_limit;
- if (ITR_IS_DYNAMIC(vsi->rx_itr_setting))
+ /* Rx and Tx usecs per queue value. If user doesn't specify the
+ * queue, return queue 0's value to represent.
+ */
+ if (queue < 0)
+ queue = 0;
+ else if (queue >= adapter->num_active_queues)
+ return -EINVAL;
+
+ rx_ring = &adapter->rx_rings[queue];
+ tx_ring = &adapter->tx_rings[queue];
+
+ if (ITR_IS_DYNAMIC(rx_ring->rx_itr_setting))
ec->use_adaptive_rx_coalesce = 1;
- if (ITR_IS_DYNAMIC(vsi->tx_itr_setting))
+ if (ITR_IS_DYNAMIC(tx_ring->tx_itr_setting))
ec->use_adaptive_tx_coalesce = 1;
- ec->rx_coalesce_usecs = vsi->rx_itr_setting & ~I40E_ITR_DYNAMIC;
- ec->tx_coalesce_usecs = vsi->tx_itr_setting & ~I40E_ITR_DYNAMIC;
+ ec->rx_coalesce_usecs = rx_ring->rx_itr_setting & ~I40E_ITR_DYNAMIC;
+ ec->tx_coalesce_usecs = tx_ring->tx_itr_setting & ~I40E_ITR_DYNAMIC;
return 0;
}
/**
- * i40evf_set_coalesce - Set interrupt coalescing settings
+ * i40evf_get_coalesce - Get interrupt coalescing settings
* @netdev: network interface device structure
* @ec: ethtool coalesce structure
*
- * Change current coalescing settings.
+ * Returns current coalescing settings. This is referred to elsewhere in the
+ * driver as Interrupt Throttle Rate, as this is how the hardware describes
+ * this functionality. Note that if per-queue settings have been modified this
+ * only represents the settings of queue 0.
**/
-static int i40evf_set_coalesce(struct net_device *netdev,
+static int i40evf_get_coalesce(struct net_device *netdev,
struct ethtool_coalesce *ec)
{
- struct i40evf_adapter *adapter = netdev_priv(netdev);
- struct i40e_hw *hw = &adapter->hw;
+ return __i40evf_get_coalesce(netdev, ec, -1);
+}
+
+/**
+ * i40evf_get_per_queue_coalesce - get coalesce values for specific queue
+ * @netdev: netdev to read
+ * @ec: coalesce settings from ethtool
+ * @queue: the queue to read
+ *
+ * Read specific queue's coalesce settings.
+ **/
+static int i40evf_get_per_queue_coalesce(struct net_device *netdev,
+ u32 queue,
+ struct ethtool_coalesce *ec)
+{
+ return __i40evf_get_coalesce(netdev, ec, queue);
+}
+
+/**
+ * i40evf_set_itr_per_queue - set ITR values for specific queue
+ * @vsi: the VSI to set values for
+ * @ec: coalesce settings from ethtool
+ * @queue: the queue to modify
+ *
+ * Change the ITR settings for a specific queue.
+ **/
+static void i40evf_set_itr_per_queue(struct i40evf_adapter *adapter,
+ struct ethtool_coalesce *ec,
+ int queue)
+{
struct i40e_vsi *vsi = &adapter->vsi;
+ struct i40e_hw *hw = &adapter->hw;
struct i40e_q_vector *q_vector;
+ u16 vector;
+
+ adapter->rx_rings[queue].rx_itr_setting = ec->rx_coalesce_usecs;
+ adapter->tx_rings[queue].tx_itr_setting = ec->tx_coalesce_usecs;
+
+ if (ec->use_adaptive_rx_coalesce)
+ adapter->rx_rings[queue].rx_itr_setting |= I40E_ITR_DYNAMIC;
+ else
+ adapter->rx_rings[queue].rx_itr_setting &= ~I40E_ITR_DYNAMIC;
+
+ if (ec->use_adaptive_tx_coalesce)
+ adapter->tx_rings[queue].tx_itr_setting |= I40E_ITR_DYNAMIC;
+ else
+ adapter->tx_rings[queue].tx_itr_setting &= ~I40E_ITR_DYNAMIC;
+
+ q_vector = adapter->rx_rings[queue].q_vector;
+ q_vector->rx.itr = ITR_TO_REG(adapter->rx_rings[queue].rx_itr_setting);
+ vector = vsi->base_vector + q_vector->v_idx;
+ wr32(hw, I40E_VFINT_ITRN1(I40E_RX_ITR, vector - 1), q_vector->rx.itr);
+
+ q_vector = adapter->tx_rings[queue].q_vector;
+ q_vector->tx.itr = ITR_TO_REG(adapter->tx_rings[queue].tx_itr_setting);
+ vector = vsi->base_vector + q_vector->v_idx;
+ wr32(hw, I40E_VFINT_ITRN1(I40E_TX_ITR, vector - 1), q_vector->tx.itr);
+
+ i40e_flush(hw);
+}
+
+/**
+ * __i40evf_set_coalesce - set coalesce settings for particular queue
+ * @netdev: the netdev to change
+ * @ec: ethtool coalesce settings
+ * @queue: the queue to change
+ *
+ * Sets the coalesce settings for a particular queue.
+ **/
+static int __i40evf_set_coalesce(struct net_device *netdev,
+ struct ethtool_coalesce *ec,
+ int queue)
+{
+ struct i40evf_adapter *adapter = netdev_priv(netdev);
+ struct i40e_vsi *vsi = &adapter->vsi;
int i;
if (ec->tx_max_coalesced_frames_irq || ec->rx_max_coalesced_frames_irq)
vsi->work_limit = ec->tx_max_coalesced_frames_irq;
- if ((ec->rx_coalesce_usecs >= (I40E_MIN_ITR << 1)) &&
- (ec->rx_coalesce_usecs <= (I40E_MAX_ITR << 1)))
- vsi->rx_itr_setting = ec->rx_coalesce_usecs;
-
- else
+ if (ec->rx_coalesce_usecs == 0) {
+ if (ec->use_adaptive_rx_coalesce)
+ netif_info(adapter, drv, netdev, "rx-usecs=0, need to disable adaptive-rx for a complete disable\n");
+ } else if ((ec->rx_coalesce_usecs < (I40E_MIN_ITR << 1)) ||
+ (ec->rx_coalesce_usecs > (I40E_MAX_ITR << 1))) {
+ netif_info(adapter, drv, netdev, "Invalid value, rx-usecs range is 0-8160\n");
return -EINVAL;
+ }
- if ((ec->tx_coalesce_usecs >= (I40E_MIN_ITR << 1)) &&
- (ec->tx_coalesce_usecs <= (I40E_MAX_ITR << 1)))
- vsi->tx_itr_setting = ec->tx_coalesce_usecs;
- else if (ec->use_adaptive_tx_coalesce)
- vsi->tx_itr_setting = (I40E_ITR_DYNAMIC |
- ITR_REG_TO_USEC(I40E_ITR_RX_DEF));
else
+ if (ec->tx_coalesce_usecs == 0) {
+ if (ec->use_adaptive_tx_coalesce)
+ netif_info(adapter, drv, netdev, "tx-usecs=0, need to disable adaptive-tx for a complete disable\n");
+ } else if ((ec->tx_coalesce_usecs < (I40E_MIN_ITR << 1)) ||
+ (ec->tx_coalesce_usecs > (I40E_MAX_ITR << 1))) {
+ netif_info(adapter, drv, netdev, "Invalid value, tx-usecs range is 0-8160\n");
return -EINVAL;
+ }
- if (ec->use_adaptive_rx_coalesce)
- vsi->rx_itr_setting |= I40E_ITR_DYNAMIC;
- else
- vsi->rx_itr_setting &= ~I40E_ITR_DYNAMIC;
-
- if (ec->use_adaptive_tx_coalesce)
- vsi->tx_itr_setting |= I40E_ITR_DYNAMIC;
- else
- vsi->tx_itr_setting &= ~I40E_ITR_DYNAMIC;
-
- for (i = 0; i < adapter->num_msix_vectors - NONQ_VECS; i++) {
- q_vector = &adapter->q_vectors[i];
- q_vector->rx.itr = ITR_TO_REG(vsi->rx_itr_setting);
- wr32(hw, I40E_VFINT_ITRN1(0, i), q_vector->rx.itr);
- q_vector->tx.itr = ITR_TO_REG(vsi->tx_itr_setting);
- wr32(hw, I40E_VFINT_ITRN1(1, i), q_vector->tx.itr);
- i40e_flush(hw);
+ /* Rx and Tx usecs has per queue value. If user doesn't specify the
+ * queue, apply to all queues.
+ */
+ if (queue < 0) {
+ for (i = 0; i < adapter->num_active_queues; i++)
+ i40evf_set_itr_per_queue(adapter, ec, i);
+ } else if (queue < adapter->num_active_queues) {
+ i40evf_set_itr_per_queue(adapter, ec, queue);
+ } else {
+ netif_info(adapter, drv, netdev, "Invalid queue value, queue range is 0 - %d\n",
+ adapter->num_active_queues - 1);
+ return -EINVAL;
}
return 0;
}
+/**
+ * i40evf_set_coalesce - Set interrupt coalescing settings
+ * @netdev: network interface device structure
+ * @ec: ethtool coalesce structure
+ *
+ * Change current coalescing settings for every queue.
+ **/
+static int i40evf_set_coalesce(struct net_device *netdev,
+ struct ethtool_coalesce *ec)
+{
+ return __i40evf_set_coalesce(netdev, ec, -1);
+}
+
+/**
+ * i40evf_set_per_queue_coalesce - set specific queue's coalesce settings
+ * @netdev: the netdev to change
+ * @ec: ethtool's coalesce settings
+ * @queue: the queue to modify
+ *
+ * Modifies a specific queue's coalesce settings.
+ */
+static int i40evf_set_per_queue_coalesce(struct net_device *netdev,
+ u32 queue,
+ struct ethtool_coalesce *ec)
+{
+ return __i40evf_set_coalesce(netdev, ec, queue);
+}
+
/**
* i40evf_get_rxnfc - command to get RX flow classification rules
* @netdev: network interface device structure
.set_msglevel = i40evf_set_msglevel,
.get_coalesce = i40evf_get_coalesce,
.set_coalesce = i40evf_set_coalesce,
+ .get_per_queue_coalesce = i40evf_get_per_queue_coalesce,
+ .set_per_queue_coalesce = i40evf_set_per_queue_coalesce,
.get_rxnfc = i40evf_get_rxnfc,
.get_rxfh_indir_size = i40evf_get_rxfh_indir_size,
.get_rxfh = i40evf_get_rxfh,
projects / karo-tx-linux.git / blobdiff