#if (CONFIG_SYS_NUM_FM1_10GEC >= 2)
FM_TGEC_INFO_INITIALIZER(1, 2),
#endif
+#if (CONFIG_SYS_NUM_FM1_10GEC >= 3)
+ FM_TGEC_INFO_INITIALIZER2(1, 3),
+#endif
+#if (CONFIG_SYS_NUM_FM1_10GEC >= 4)
+ FM_TGEC_INFO_INITIALIZER2(1, 4),
+#endif
#if (CONFIG_SYS_NUM_FM2_10GEC >= 1)
FM_TGEC_INFO_INITIALIZER(2, 1),
#endif
fman_disable_port(port);
}
+void fm_enable_port(enum fm_port port)
+{
+ int i = fm_port_to_index(port);
+
+ fm_info[i].enabled = 1;
+ fman_enable_port(port);
+}
+
void fm_info_set_mdio(enum fm_port port, struct mii_dev *bus)
{
int i = fm_port_to_index(port);
* FM1_10GEC1 is enabled and FM1_DTSEC9 is disabled, ensure that the
* dual-role MAC is not disabled, ditto for other dual-role MACs.
*/
- if (((info->port == FM1_DTSEC9) && (PORT_IS_ENABLED(FM1_10GEC1))) ||
- ((info->port == FM1_DTSEC10) && (PORT_IS_ENABLED(FM1_10GEC2))) ||
- ((info->port == FM1_10GEC1) && (PORT_IS_ENABLED(FM1_DTSEC9))) ||
- ((info->port == FM1_10GEC2) && (PORT_IS_ENABLED(FM1_DTSEC10)))
+ if (((info->port == FM1_DTSEC9) && (PORT_IS_ENABLED(FM1_10GEC1))) ||
+ ((info->port == FM1_DTSEC10) && (PORT_IS_ENABLED(FM1_10GEC2))) ||
+ ((info->port == FM1_DTSEC1) && (PORT_IS_ENABLED(FM1_10GEC3))) ||
+ ((info->port == FM1_DTSEC2) && (PORT_IS_ENABLED(FM1_10GEC4))) ||
+ ((info->port == FM1_10GEC1) && (PORT_IS_ENABLED(FM1_DTSEC9))) ||
+ ((info->port == FM1_10GEC2) && (PORT_IS_ENABLED(FM1_DTSEC10))) ||
+ ((info->port == FM1_10GEC3) && (PORT_IS_ENABLED(FM1_DTSEC1))) ||
+ ((info->port == FM1_10GEC4) && (PORT_IS_ENABLED(FM1_DTSEC2)))
#if (CONFIG_SYS_NUM_FMAN == 2)
||
((info->port == FM2_DTSEC9) && (PORT_IS_ENABLED(FM2_10GEC1))) ||
"status", "disabled", strlen("disabled") + 1, 1);
}
+#ifdef CONFIG_SYS_FMAN_V3
+static int ft_fixup_xgec(void *blob, struct fm_eth_info *info)
+{
+ int off, i, ci;
+#define FM1_10GEC3_RX_PORT_ADDR (CONFIG_SYS_CCSRBAR_PHYS + 0x488000)
+#define FM1_10GEC3_TX_PORT_ADDR (CONFIG_SYS_CCSRBAR_PHYS + 0x4a8000)
+#define FM1_10GEC3_MAC_ADDR (CONFIG_SYS_CCSRBAR_PHYS + 0x4e0000)
+
+ if ((info->port == FM1_10GEC3) || (info->port == FM1_10GEC4)) {
+ ci = (info->port == FM1_10GEC3) ? 2 : 3;
+ i = (info->port == FM1_10GEC3) ? 0 : 1;
+
+ off = fdt_node_offset_by_compat_reg(blob, "fsl,fman-port-1g-rx",
+ FM1_10GEC3_RX_PORT_ADDR +
+ i * 0x1000);
+ if (off > 0) {
+ fdt_setprop(blob, off, "cell-index", &ci, sizeof(int));
+ fdt_setprop(blob, off, "compatible",
+ "fsl,fman-port-10g-rx", 20);
+ } else {
+ goto err;
+ }
+
+ off = fdt_node_offset_by_compat_reg(blob, "fsl,fman-port-1g-tx",
+ FM1_10GEC3_TX_PORT_ADDR +
+ i * 0x1000);
+ if (off > 0) {
+ fdt_setprop(blob, off, "cell-index", &ci, sizeof(int));
+ fdt_setprop(blob, off, "compatible",
+ "fsl,fman-port-10g-tx", 20);
+ } else {
+ goto err;
+ }
+
+ off = fdt_node_offset_by_compat_reg(blob, "fsl,fman-memac",
+ FM1_10GEC3_MAC_ADDR +
+ i * 0x2000);
+ if (off > 0)
+ fdt_setprop(blob, off, "cell-index", &ci, sizeof(int));
+ else
+ goto err;
+ }
+ return 0;
+err:
+ printf("WARNING: Fail to find the node\n");
+ return -1;
+}
+#endif
+
void fdt_fixup_fman_ethernet(void *blob)
{
int i;
#ifdef CONFIG_SYS_FMAN_V3
- for (i = 0; i < ARRAY_SIZE(fm_info); i++)
+ for (i = 0; i < ARRAY_SIZE(fm_info); i++) {
ft_fixup_port(blob, &fm_info[i], "fsl,fman-memac");
+ ft_fixup_xgec(blob, &fm_info[i]);
+ }
#else
for (i = 0; i < ARRAY_SIZE(fm_info); i++) {
if (fm_info[i].type == FM_ETH_1G_E)
}
#endif
}
+
+/*QSGMII Riser Card can work in SGMII mode, but the PHY address is different.
+ *This function scans which Riser Card being used(QSGMII or SGMII Riser Card),
+ *then set the correct PHY address
+ */
+void set_sgmii_phy(struct mii_dev *bus, enum fm_port base_port,
+ unsigned int port_num, int phy_base_addr)
+{
+ unsigned int regnum = 0;
+ int qsgmii;
+ int i;
+ int phy_real_addr;
+
+ qsgmii = is_qsgmii_riser_card(bus, phy_base_addr, port_num, regnum);
+
+ if (!qsgmii)
+ return;
+
+ for (i = base_port; i < base_port + port_num; i++) {
+ if (fm_info_get_enet_if(i) == PHY_INTERFACE_MODE_SGMII) {
+ phy_real_addr = phy_base_addr + i - base_port;
+ fm_info_set_phy_address(i, phy_real_addr);
+ }
+ }
+}
+
+/*to check whether qsgmii riser card is used*/
+int is_qsgmii_riser_card(struct mii_dev *bus, int phy_base_addr,
+ unsigned int port_num, unsigned regnum)
+{
+ int i;
+ int val;
+
+ if (!bus)
+ return 0;
+
+ for (i = phy_base_addr; i < phy_base_addr + port_num; i++) {
+ val = bus->read(bus, i, MDIO_DEVAD_NONE, regnum);
+ if (val != MIIM_TIMEOUT)
+ return 1;
+ }
+
+ return 0;
+}