rtl8180: adapt for deprecated IEEE80211_CONF_SHORT_SLOT_TIME flag

[karo-tx-linux.git] / drivers / net / hp100.c

diff --git a/drivers/net/hp100.c b/drivers/net/hp100.c
index 8caa591c56494f486461dd831a152bf09d229bb1..4dda9b043b134358292b60426580a752db43cff2 100644 (file)
--- a/drivers/net/hp100.c
+++ b/drivers/net/hp100.c
@@ -8,7 +8,7 @@
 ** Extended for new busmaster capable chipsets by
 ** Siegfried "Frieder" Loeffler (dg1sek) <floeff@mathematik.uni-stuttgart.de>
 **
-** Maintained by: Jaroslav Kysela <perex@suse.cz>
+** Maintained by: Jaroslav Kysela <perex@perex.cz>
 **
 ** This driver has only been tested with
 ** -- HP J2585B 10/100 Mbit/s PCI Busmaster
@@ -404,8 +404,6 @@ struct net_device * __init hp100_probe(int unit)
        if (!dev)
                return ERR_PTR(-ENODEV);
 
-       SET_MODULE_OWNER(dev);
-
 #ifdef HP100_DEBUG_B
        hp100_outw(0x4200, TRACE);
        printk("hp100: %s: probe\n", dev->name);
@@ -1155,7 +1153,7 @@ static void hp100_init_pdls(struct net_device *dev)
        printk("hp100: %s: init pdls\n", dev->name);
 #endif
 
-       if (0 == lp->page_vaddr_algn)
+       if (!lp->page_vaddr_algn)
                printk("hp100: %s: Warning: lp->page_vaddr_algn not initialised!\n", dev->name);
        else {
                /* pageptr shall point into the DMA accessible memory region  */
@@ -1836,7 +1834,6 @@ static void hp100_rx(struct net_device *dev)
                                        ptr[9], ptr[10], ptr[11]);
 #endif
                        netif_rx(skb);
-                       dev->last_rx = jiffies;
                        lp->stats.rx_packets++;
                        lp->stats.rx_bytes += pkt_len;
                }
@@ -1927,7 +1924,6 @@ static void hp100_rx_bm(struct net_device *dev)
 
                                netif_rx(ptr->skb);     /* Up and away... */
 
-                               dev->last_rx = jiffies;
                                lp->stats.rx_packets++;
                                lp->stats.rx_bytes += pkt_len;
                        }
@@ -2095,9 +2091,8 @@ static void hp100_set_multicast_list(struct net_device *dev)
                                addrs = dmi->dmi_addr;
                                if ((*addrs & 0x01) == 0x01) {  /* multicast address? */
 #ifdef HP100_DEBUG
-                                       printk("hp100: %s: multicast = %02x:%02x:%02x:%02x:%02x:%02x, ",
-                                                    dev->name, addrs[0], addrs[1], addrs[2],
-                                                    addrs[3], addrs[4], addrs[5]);
+                                       printk("hp100: %s: multicast = %pM, ",
+                                                    dev->name, addrs);
 #endif
                                        for (j = idx = 0; j < 6; j++) {
                                                idx ^= *addrs++ & 0x3f;
@@ -2843,7 +2838,6 @@ static int __init hp100_eisa_probe (struct device *gendev)
        if (!dev)
                return -ENOMEM;
 
-       SET_MODULE_OWNER(dev);
        SET_NETDEV_DEV(dev, &edev->dev);
 
        err = hp100_probe1(dev, edev->base_addr + 0xC38, HP100_BUS_EISA, NULL);
@@ -2896,7 +2890,6 @@ static int __devinit hp100_pci_probe (struct pci_dev *pdev,
                goto out0;
        }
 
-       SET_MODULE_OWNER(dev);
        SET_NETDEV_DEV(dev, &pdev->dev);
 
        pci_read_config_word(pdev, PCI_COMMAND, &pci_command);
@@ -2955,7 +2948,7 @@ static struct pci_driver hp100_pci_driver = {
  */
 
 MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Jaroslav Kysela <perex@suse.cz>, "
+MODULE_AUTHOR("Jaroslav Kysela <perex@perex.cz>, "
               "Siegfried \"Frieder\" Loeffler (dg1sek) <floeff@mathematik.uni-stuttgart.de>");
 MODULE_DESCRIPTION("HP CASCADE Architecture Driver for 100VG-AnyLan Network Adapters");
 
@@ -2993,7 +2986,6 @@ static int __init hp100_isa_init(void)
 
                        return -ENOMEM;
                }
-               SET_MODULE_OWNER(dev);
 
                err = hp100_isa_probe(dev, hp100_port[i]);
                if (!err)