#define ADAPTER_LIST_SIZE 12
+static uint32_t msi_tgt_status[4] = {
+ ISR_INT_TARGET_STATUS, ISR_INT_TARGET_STATUS_F1,
+ ISR_INT_TARGET_STATUS_F2, ISR_INT_TARGET_STATUS_F3
+};
+
+static uint32_t sw_int_mask[4] = {
+ CRB_SW_INT_MASK_0, CRB_SW_INT_MASK_1,
+ CRB_SW_INT_MASK_2, CRB_SW_INT_MASK_3
+};
+
static void netxen_nic_disable_int(struct netxen_adapter *adapter)
{
- uint32_t mask = 0x7ff;
+ u32 mask = 0x7ff;
int retries = 32;
+ int port = adapter->portnum;
+ int pci_fn = adapter->ahw.pci_func;
- DPRINTK(1, INFO, "Entered ISR Disable \n");
-
- switch (adapter->portnum) {
- case 0:
- writel(0x0, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_0));
- break;
- case 1:
- writel(0x0, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_1));
- break;
- case 2:
- writel(0x0, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_2));
- break;
- case 3:
- writel(0x0, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_3));
- break;
+ if (adapter->msi_mode != MSI_MODE_MULTIFUNC) {
+ writel(0x0, NETXEN_CRB_NORMALIZE(adapter, sw_int_mask[port]));
}
if (adapter->intr_scheme != -1 &&
adapter->intr_scheme != INTR_SCHEME_PERPORT)
writel(mask,PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_MASK));
- /* Window = 0 or 1 */
if (!(adapter->flags & NETXEN_NIC_MSI_ENABLED)) {
do {
writel(0xffffffff,
printk(KERN_NOTICE "%s: Failed to disable interrupt completely\n",
netxen_nic_driver_name);
}
+ } else {
+ if (adapter->msi_mode == MSI_MODE_MULTIFUNC) {
+ writel(0xffffffff, PCI_OFFSET_SECOND_RANGE(adapter,
+ msi_tgt_status[pci_fn]));
+ }
}
-
- DPRINTK(1, INFO, "Done with Disable Int\n");
}
static void netxen_nic_enable_int(struct netxen_adapter *adapter)
{
u32 mask;
+ int port = adapter->portnum;
DPRINTK(1, INFO, "Entered ISR Enable \n");
writel(mask, PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_MASK));
}
- switch (adapter->portnum) {
- case 0:
- writel(0x1, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_0));
- break;
- case 1:
- writel(0x1, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_1));
- break;
- case 2:
- writel(0x1, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_2));
- break;
- case 3:
- writel(0x1, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_3));
- break;
- }
+ writel(0x1, NETXEN_CRB_NORMALIZE(adapter, sw_int_mask[port]));
if (!(adapter->flags & NETXEN_NIC_MSI_ENABLED)) {
mask = 0xbff;
struct netxen_recv_context *recv_ctx = NULL;
struct netxen_rcv_desc_ctx *rcv_desc = NULL;
struct netxen_cmd_buffer *cmd_buf_arr = NULL;
- u64 mac_addr[FLASH_NUM_PORTS + 1];
+ __le64 mac_addr[FLASH_NUM_PORTS + 1];
int valid_mac = 0;
u32 val;
int pci_func_id = PCI_FUNC(pdev->devfn);
printk(KERN_INFO "%s \n", netxen_nic_driver_string);
if (pdev->class != 0x020000) {
- printk(KERN_ERR"NetXen function %d, class %x will not"
+ printk(KERN_ERR"NetXen function %d, class %x will not "
"be enabled.\n",pci_func_id, pdev->class);
return -ENODEV;
}
first_page_group_start = 0;
first_page_group_end = 0;
} else {
- err = -EIO;
+ err = -EIO;
goto err_out_free_netdev;
}
- if (((mem_ptr0 == 0UL) && (mem_len == NETXEN_PCI_128MB_SIZE)) ||
- (mem_ptr1 == 0UL) || (mem_ptr2 == 0UL)) {
+ if ((!mem_ptr0 && mem_len == NETXEN_PCI_128MB_SIZE) ||
+ !mem_ptr1 || !mem_ptr2) {
DPRINTK(ERR,
"Cannot remap adapter memory aborting.:"
"0 -> %p, 1 -> %p, 2 -> %p\n",
/* this will be read from FW later */
adapter->intr_scheme = -1;
+ adapter->msi_mode = -1;
/* This will be reset for mezz cards */
adapter->portnum = pci_func_id;
netdev->open = netxen_nic_open;
netdev->stop = netxen_nic_close;
netdev->hard_start_xmit = netxen_nic_xmit_frame;
- netdev->get_stats = netxen_nic_get_stats;
+ netdev->get_stats = netxen_nic_get_stats;
netdev->set_multicast_list = netxen_nic_set_multi;
netdev->set_mac_address = netxen_nic_set_mac;
netdev->change_mtu = netxen_nic_change_mtu;
adapter->max_tx_desc_count = MAX_CMD_DESCRIPTORS_HOST;
if ((adapter->ahw.boardcfg.board_type == NETXEN_BRDTYPE_P2_SB35_4G) ||
- (adapter->ahw.boardcfg.board_type ==
- NETXEN_BRDTYPE_P2_SB31_2G))
+ (adapter->ahw.boardcfg.board_type ==
+ NETXEN_BRDTYPE_P2_SB31_2G))
adapter->max_rx_desc_count = MAX_RCV_DESCRIPTORS_1G;
else
adapter->max_rx_desc_count = MAX_RCV_DESCRIPTORS;
vmalloc(RCV_BUFFSIZE);
if (rcv_desc->rx_buf_arr == NULL) {
- printk(KERN_ERR "%s: Could not allocate"
+ printk(KERN_ERR "%s: Could not allocate "
"rcv_desc->rx_buf_arr memory:%d\n",
netxen_nic_driver_name,
(int)RCV_BUFFSIZE);
if (adapter->portnum == 0) {
err = netxen_initialize_adapter_offload(adapter);
- if (err)
+ if (err)
goto err_out_free_rx_buffer;
- val = readl(NETXEN_CRB_NORMALIZE(adapter,
+ val = readl(NETXEN_CRB_NORMALIZE(adapter,
NETXEN_CAM_RAM(0x1fc)));
if (val == 0x55555555) {
/* This is the first boot after power up */
/*
* Tell the hardware our version number.
*/
- i = (_NETXEN_NIC_LINUX_MAJOR << 16)
+ i = (_NETXEN_NIC_LINUX_MAJOR << 16)
| ((_NETXEN_NIC_LINUX_MINOR << 8))
| (_NETXEN_NIC_LINUX_SUBVERSION);
writel(i, NETXEN_CRB_NORMALIZE(adapter, CRB_DRIVER_VERSION));
break;
case NETXEN_NIC_XGBE:
- printk(KERN_INFO "%s: XGbE board initialized\n",
+ printk(KERN_INFO "%s: XGbE board initialized\n",
netxen_nic_driver_name);
break;
}
buffrag++;
if (buffrag->dma) {
pci_unmap_page(adapter->pdev, buffrag->dma,
- buffrag->length,
+ buffrag->length,
PCI_DMA_TODEVICE);
buffrag->dma = 0ULL;
}
}
if (frag_count > MAX_BUFFERS_PER_CMD) {
- printk("%s: %s netxen_nic_xmit_frame: frag_count (%d)"
+ printk("%s: %s netxen_nic_xmit_frame: frag_count (%d) "
"too large, can handle only %d frags\n",
netxen_nic_driver_name, netdev->name,
frag_count, MAX_BUFFERS_PER_CMD);
static void netxen_tx_timeout_task(struct work_struct *work)
{
- struct netxen_adapter *adapter =
+ struct netxen_adapter *adapter =
container_of(work, struct netxen_adapter, tx_timeout_task);
printk(KERN_ERR "%s %s: transmit timeout, resetting.\n",
static int __init netxen_init_module(void)
{
- if ((netxen_workq = create_singlethread_workqueue("netxen")) == 0)
+ if ((netxen_workq = create_singlethread_workqueue("netxen")) == NULL)
return -ENOMEM;
return pci_register_driver(&netxen_driver);