drivers/net/wireless/b43: fix sparse warnings: make symbols static

[karo-tx-linux.git] / drivers / net / qla3xxx.c

diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c
index f188736028d78c7107cba111c9935f1f16cca788..33e8e62b450212f281cc9e6e641a73ea12d1e492 100644 (file)
--- a/drivers/net/qla3xxx.c
+++ b/drivers/net/qla3xxx.c
@@ -2293,7 +2293,7 @@ static int ql_poll(struct napi_struct *napi, int budget)
 
        if (tx_cleaned + rx_cleaned != budget) {
                spin_lock_irqsave(&qdev->hw_lock, hw_flags);
-               __netif_rx_complete(ndev, napi);
+               __netif_rx_complete(napi);
                ql_update_small_bufq_prod_index(qdev);
                ql_update_lrg_bufq_prod_index(qdev);
                writel(qdev->rsp_consumer_index,
@@ -2352,8 +2352,8 @@ static irqreturn_t ql3xxx_isr(int irq, void *dev_id)
                spin_unlock(&qdev->adapter_lock);
        } else if (value & ISP_IMR_DISABLE_CMPL_INT) {
                ql_disable_interrupts(qdev);
-               if (likely(netif_rx_schedule_prep(ndev, &qdev->napi))) {
-                       __netif_rx_schedule(ndev, &qdev->napi);
+               if (likely(netif_rx_schedule_prep(&qdev->napi))) {
+                       __netif_rx_schedule(&qdev->napi);
                }
        } else {
                return IRQ_NONE;
@@ -3900,13 +3900,24 @@ static void ql3xxx_timer(unsigned long ptr)
        queue_delayed_work(qdev->workqueue, &qdev->link_state_work, 0);
 }
 
+static const struct net_device_ops ql3xxx_netdev_ops = {
+       .ndo_open               = ql3xxx_open,
+       .ndo_start_xmit         = ql3xxx_send,
+       .ndo_stop               = ql3xxx_close,
+       .ndo_set_multicast_list = NULL, /* not allowed on NIC side */
+       .ndo_change_mtu         = eth_change_mtu,
+       .ndo_validate_addr      = eth_validate_addr,
+       .ndo_set_mac_address    = ql3xxx_set_mac_address,
+       .ndo_tx_timeout         = ql3xxx_tx_timeout,
+};
+
 static int __devinit ql3xxx_probe(struct pci_dev *pdev,
                                  const struct pci_device_id *pci_entry)
 {
        struct net_device *ndev = NULL;
        struct ql3_adapter *qdev = NULL;
        static int cards_found = 0;
-       int pci_using_dac, err;
+       int uninitialized_var(pci_using_dac), err;
 
        err = pci_enable_device(pdev);
        if (err) {
@@ -3978,17 +3989,8 @@ static int __devinit ql3xxx_probe(struct pci_dev *pdev,
        spin_lock_init(&qdev->hw_lock);
 
        /* Set driver entry points */
-       ndev->open = ql3xxx_open;
-       ndev->hard_start_xmit = ql3xxx_send;
-       ndev->stop = ql3xxx_close;
-       /* ndev->set_multicast_list
-        * This device is one side of a two-function adapter
-        * (NIC and iSCSI).  Promiscuous mode setting/clearing is
-        * not allowed from the NIC side.
-        */
+       ndev->netdev_ops = &ql3xxx_netdev_ops;
        SET_ETHTOOL_OPS(ndev, &ql3xxx_ethtool_ops);
-       ndev->set_mac_address = ql3xxx_set_mac_address;
-       ndev->tx_timeout = ql3xxx_tx_timeout;
        ndev->watchdog_timeo = 5 * HZ;
 
        netif_napi_add(ndev, &qdev->napi, ql_poll, 64);