#define _QLCNIC_LINUX_MAJOR 5
#define _QLCNIC_LINUX_MINOR 0
-#define _QLCNIC_LINUX_SUBVERSION 0
-#define QLCNIC_LINUX_VERSIONID "5.0.0"
+#define _QLCNIC_LINUX_SUBVERSION 2
+#define QLCNIC_LINUX_VERSIONID "5.0.2"
+#define QLCNIC_DRV_IDC_VER 0x01
#define QLCNIC_VERSION_CODE(a, b, c) (((a) << 24) + ((b) << 16) + (c))
#define _major(v) (((v) >> 24) & 0xff)
#define QLCNIC_CT_DEFAULT_RX_BUF_LEN 2048
#define QLCNIC_LRO_BUFFER_EXTRA 2048
-#define QLCNIC_RX_LRO_BUFFER_LENGTH (8060)
-
/* Opcodes to be used with the commands */
#define TX_ETHER_PKT 0x01
#define TX_TCP_PKT 0x02
#define RCV_RING_NORMAL 0
#define RCV_RING_JUMBO 1
-#define RCV_RING_LRO 2
#define MIN_CMD_DESCRIPTORS 64
#define MIN_RCV_DESCRIPTORS 64
#define MAX_RCV_DESCRIPTORS_10G 8192
#define MAX_JUMBO_RCV_DESCRIPTORS_1G 512
#define MAX_JUMBO_RCV_DESCRIPTORS_10G 1024
-#define MAX_LRO_RCV_DESCRIPTORS 8
#define DEFAULT_RCV_DESCRIPTORS_1G 2048
#define DEFAULT_RCV_DESCRIPTORS_10G 4096
#define get_next_index(index, length) \
(((index) + 1) & ((length) - 1))
-#define MPORT_MULTI_FUNCTION_MODE 0x2222
-
/*
* Following data structures describe the descriptors that will be used.
* Added fileds of tcpHdrSize and ipHdrSize, The driver needs to do it only when
unsigned long pci_len0;
- u32 ocm_win;
- u32 crb_win;
-
rwlock_t crb_lock;
struct mutex mem_lock;
- u8 cut_through;
u8 revision_id;
u8 pci_func;
u8 linkup;
u64 xmit_on;
u64 xmit_off;
u64 skb_alloc_failure;
+ u64 null_skb;
+ u64 null_rxbuf;
+ u64 rx_dma_map_error;
+ u64 tx_dma_map_error;
};
/*
u16 num_txd;
u16 num_rxd;
u16 num_jumbo_rxd;
- u16 num_lro_rxd;
u8 max_rds_rings;
u8 max_sds_rings;
u8 driver_mismatch;
u8 msix_supported;
u8 rx_csum;
- u8 pci_using_dac;
u8 portnum;
u8 physical_port;
u8 dev_state;
u8 diag_test;
u8 diag_cnt;
+ u8 reset_ack_timeo;
+ u8 dev_init_timeo;
u8 rsrd1;
- u16 rsrd2;
+ u16 msg_enable;
u8 mac_addr[ETH_ALEN];
+ u64 dev_rst_time;
+
struct qlcnic_adapter_stats stats;
struct qlcnic_recv_context recv_ctx;
int qlcnic_hw_write_wx_2M(struct qlcnic_adapter *, ulong off, u32 data);
int qlcnic_pci_mem_write_2M(struct qlcnic_adapter *, u64 off, u64 data);
int qlcnic_pci_mem_read_2M(struct qlcnic_adapter *, u64 off, u64 *data);
+void qlcnic_pci_camqm_read_2M(struct qlcnic_adapter *, u64, u64 *);
+void qlcnic_pci_camqm_write_2M(struct qlcnic_adapter *, u64, u64);
+
+#define ADDR_IN_RANGE(addr, low, high) \
+ (((addr) < (high)) && ((addr) >= (low)))
#define QLCRD32(adapter, off) \
(qlcnic_hw_read_wx_2M(adapter, off))
void qlcnic_request_firmware(struct qlcnic_adapter *adapter);
void qlcnic_release_firmware(struct qlcnic_adapter *adapter);
int qlcnic_pinit_from_rom(struct qlcnic_adapter *adapter);
+int qlcnic_setup_idc_param(struct qlcnic_adapter *adapter);
int qlcnic_rom_fast_read(struct qlcnic_adapter *adapter, int addr, int *valp);
int qlcnic_rom_fast_read_words(struct qlcnic_adapter *adapter, int addr,
extern const struct ethtool_ops qlcnic_ethtool_ops;
+#define QLCDB(adapter, lvl, _fmt, _args...) do { \
+ if (NETIF_MSG_##lvl & adapter->msg_enable) \
+ printk(KERN_INFO "%s: %s: " _fmt, \
+ dev_name(&adapter->pdev->dev), \
+ __func__, ##_args); \
+ } while (0)
+
#endif /* __QLCNIC_H_ */