/*
- * Copyright (C) 2009 - QLogic Corporation.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston,
- * MA 02111-1307, USA.
- *
- * The full GNU General Public License is included in this distribution
- * in the file called "COPYING".
+ * QLogic qlcnic NIC Driver
+ * Copyright (c) 2009-2010 QLogic Corporation
*
+ * See LICENSE.qlcnic for copyright and licensing details.
*/
#include <linux/slab.h>
dev_info(&pdev->dev, "firmware v%d.%d.%d\n",
fw_major, fw_minor, fw_build);
-
if (adapter->ahw.port_type == QLCNIC_XGBE) {
- adapter->num_rxd = DEFAULT_RCV_DESCRIPTORS_10G;
+ if (adapter->flags & QLCNIC_ESWITCH_ENABLED) {
+ adapter->num_rxd = DEFAULT_RCV_DESCRIPTORS_VF;
+ adapter->max_rxd = MAX_RCV_DESCRIPTORS_VF;
+ } else {
+ adapter->num_rxd = DEFAULT_RCV_DESCRIPTORS_10G;
+ adapter->max_rxd = MAX_RCV_DESCRIPTORS_10G;
+ }
+
adapter->num_jumbo_rxd = MAX_JUMBO_RCV_DESCRIPTORS_10G;
+ adapter->max_jumbo_rxd = MAX_JUMBO_RCV_DESCRIPTORS_10G;
+
} else if (adapter->ahw.port_type == QLCNIC_GBE) {
adapter->num_rxd = DEFAULT_RCV_DESCRIPTORS_1G;
adapter->num_jumbo_rxd = MAX_JUMBO_RCV_DESCRIPTORS_1G;
+ adapter->max_jumbo_rxd = MAX_JUMBO_RCV_DESCRIPTORS_1G;
+ adapter->max_rxd = MAX_RCV_DESCRIPTORS_1G;
}
adapter->msix_supported = !!use_msi_x;
netdev->irq = adapter->msix_entries[0].vector;
netif_carrier_off(netdev);
- netif_stop_queue(netdev);
err = register_netdev(netdev);
if (err) {
uint8_t revision_id;
uint8_t pci_using_dac;
char brd_name[QLCNIC_MAX_BOARD_NAME_LEN];
+ u32 val;
err = pci_enable_device(pdev);
if (err)
if (err)
goto err_out_iounmap;
+ val = QLCRD32(adapter, QLCNIC_CRB_DRV_ACTIVE);
+ if (QLC_DEV_CHECK_ACTIVE(val, adapter->portnum))
+ adapter->flags |= QLCNIC_NEED_FLR;
+
err = adapter->nic_ops->start_firmware(adapter);
if (err) {
dev_err(&pdev->dev, "Loading fw failed.Please Reboot\n");
hlist_for_each_entry_safe(tmp_fil, tmp_hnode, n, head, fnode) {
if (!memcmp(tmp_fil->faddr, &src_addr, ETH_ALEN) &&
tmp_fil->vlan_id == vlan_id) {
+
+ if (jiffies >
+ (QLCNIC_READD_AGE * HZ + tmp_fil->ftime))
+ qlcnic_change_filter(adapter, src_addr, vlan_id,
+ tx_ring);
tmp_fil->ftime = jiffies;
return;
}
qlcnic_api_unlock(adapter);
}
-/* Caller should held RESETTING bit.
- * This should be call in sync with qlcnic_request_quiscent_mode.
- */
-void qlcnic_clear_quiscent_mode(struct qlcnic_adapter *adapter)
-{
- qlcnic_clr_drv_state(adapter);
- qlcnic_api_lock(adapter);
- QLCWR32(adapter, QLCNIC_CRB_DEV_STATE, QLCNIC_DEV_READY);
- qlcnic_api_unlock(adapter);
-}
-
-/* Caller should held RESETTING bit.
- */
-int qlcnic_request_quiscent_mode(struct qlcnic_adapter *adapter)
-{
- u8 timeo = adapter->dev_init_timeo / 2;
- u32 state;
-
- if (qlcnic_api_lock(adapter))
- return -EIO;
-
- state = QLCRD32(adapter, QLCNIC_CRB_DEV_STATE);
- if (state != QLCNIC_DEV_READY)
- return -EIO;
-
- QLCWR32(adapter, QLCNIC_CRB_DEV_STATE, QLCNIC_DEV_NEED_QUISCENT);
- qlcnic_api_unlock(adapter);
- QLCDB(adapter, DRV, "NEED QUISCENT state set\n");
- qlcnic_idc_debug_info(adapter, 0);
-
- qlcnic_set_drv_state(adapter, QLCNIC_DEV_NEED_QUISCENT);
-
- do {
- msleep(2000);
- state = QLCRD32(adapter, QLCNIC_CRB_DEV_STATE);
- if (state == QLCNIC_DEV_QUISCENT)
- return 0;
- if (!qlcnic_check_drv_state(adapter)) {
- if (qlcnic_api_lock(adapter))
- return -EIO;
- QLCWR32(adapter, QLCNIC_CRB_DEV_STATE,
- QLCNIC_DEV_QUISCENT);
- qlcnic_api_unlock(adapter);
- QLCDB(adapter, DRV, "QUISCENT mode set\n");
- return 0;
- }
- } while (--timeo);
-
- dev_err(&adapter->pdev->dev, "Failed to quiesce device, DRV_STATE=%08x"
- " DRV_ACTIVE=%08x\n", QLCRD32(adapter, QLCNIC_CRB_DRV_STATE),
- QLCRD32(adapter, QLCNIC_CRB_DRV_ACTIVE));
- qlcnic_clear_quiscent_mode(adapter);
- return -EIO;
-}
-
/*Transit to RESET state from READY state only */
static void
qlcnic_dev_request_reset(struct qlcnic_adapter *adapter)
case QLCNIC_PORT_DEFAULTS:
if (QLC_DEV_GET_DRV(op_mode, pci_func) !=
QLCNIC_NON_PRIV_FUNC) {
- esw_cfg[i].mac_anti_spoof = 0;
- esw_cfg[i].mac_override = 1;
- esw_cfg[i].promisc_mode = 1;
+ if (esw_cfg[i].mac_anti_spoof != 0)
+ return QL_STATUS_INVALID_PARAM;
+ if (esw_cfg[i].mac_override != 1)
+ return QL_STATUS_INVALID_PARAM;
+ if (esw_cfg[i].promisc_mode != 1)
+ return QL_STATUS_INVALID_PARAM;
}
break;
case QLCNIC_ADD_VLAN:
projects / mv-sheeva.git / blobdiff