sp->def_mac_addr[offset].mac_addr[1] = (u8) (mac_addr >> 32);
sp->def_mac_addr[offset].mac_addr[0] = (u8) (mac_addr >> 40);
}
+
/* Add the vlan */
static void s2io_vlan_rx_register(struct net_device *dev,
- struct vlan_group *grp)
+ struct vlan_group *grp)
{
int i;
struct s2io_nic *nic = netdev_priv(dev);
}
/* Unregister the vlan */
-static void s2io_vlan_rx_kill_vid(struct net_device *dev, unsigned long vid)
+static void s2io_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid)
{
int i;
struct s2io_nic *nic = netdev_priv(dev);
s2io_chk_rx_buffers(nic, ring);
if (pkts_processed < budget_org) {
- netif_rx_complete(dev, napi);
+ napi_complete(napi);
/*Re Enable MSI-Rx Vector*/
addr = (u8 __iomem *)&bar0->xmsi_mask_reg;
addr += 7 - ring->ring_no;
{
struct s2io_nic *nic = container_of(napi, struct s2io_nic, napi);
struct ring_info *ring;
- struct net_device *dev = nic->dev;
struct config_param *config;
struct mac_info *mac_control;
int pkts_processed = 0;
break;
}
if (pkts_processed < budget_org) {
- netif_rx_complete(dev, napi);
+ napi_complete(napi);
/* Re enable the Rx interrupts for the ring */
writeq(0, &bar0->rx_traffic_mask);
readl(&bar0->rx_traffic_mask);
ret = pci_enable_msix(nic->pdev, nic->entries, nic->num_entries);
/* We fail init if error or we get less vectors than min required */
if (ret) {
- DBG_PRINT(ERR_DBG, "%s: Enabling MSIX failed\n", nic->dev->name);
+ DBG_PRINT(ERR_DBG, "s2io: Enabling MSI-X failed\n");
kfree(nic->entries);
nic->mac_control.stats_info->sw_stat.mem_freed
+= (nic->num_entries * sizeof(struct msix_entry));
struct ring_info *ring = (struct ring_info *)dev_id;
struct s2io_nic *sp = ring->nic;
struct XENA_dev_config __iomem *bar0 = sp->bar0;
- struct net_device *dev = sp->dev;
if (unlikely(!is_s2io_card_up(sp)))
return IRQ_HANDLED;
val8 = (ring->ring_no == 0) ? 0x7f : 0xff;
writeb(val8, addr);
val8 = readb(addr);
- netif_rx_schedule(dev, &ring->napi);
+ napi_schedule(&ring->napi);
} else {
rx_intr_handler(ring, 0);
s2io_chk_rx_buffers(sp, ring);
if (config->napi) {
if (reason & GEN_INTR_RXTRAFFIC) {
- netif_rx_schedule(dev, &sp->napi);
+ napi_schedule(&sp->napi);
writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_mask);
writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_int);
readl(&bar0->rx_traffic_int);
/* read from CAM unicast & multicast addresses and store it in
* def_mac_addr structure
*/
-void do_s2io_store_unicast_mc(struct s2io_nic *sp)
+static void do_s2io_store_unicast_mc(struct s2io_nic *sp)
{
int offset;
u64 mac_addr = 0x0;
/* Initialise napi */
if (config->napi) {
- int i;
if (config->intr_type == MSI_X) {
for (i = 0; i < sp->config.rx_ring_num; i++)
napi_enable(&sp->mac_control.rings[i].napi);
int ring_no = ring_data->ring_no;
u16 l3_csum, l4_csum;
unsigned long long err = rxdp->Control_1 & RXD_T_CODE;
- struct lro *lro;
+ struct lro *uninitialized_var(lro);
u8 err_mask;
skb->dev = dev;
sp->mac_control.stats_info->sw_stat.mem_freed += skb->truesize;
send_up:
+ skb_record_rx_queue(skb, ring_no);
queue_rx_frame(skb, RXD_GET_VLAN_TAG(rxdp->Control_2));
aggregate:
sp->mac_control.rings[ring_no].rx_bufs_left -= 1;
S2IO_BIT_RESET);
}
+static const struct net_device_ops s2io_netdev_ops = {
+ .ndo_open = s2io_open,
+ .ndo_stop = s2io_close,
+ .ndo_get_stats = s2io_get_stats,
+ .ndo_start_xmit = s2io_xmit,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_set_multicast_list = s2io_set_multicast,
+ .ndo_do_ioctl = s2io_ioctl,
+ .ndo_set_mac_address = s2io_set_mac_addr,
+ .ndo_change_mtu = s2io_change_mtu,
+ .ndo_vlan_rx_register = s2io_vlan_rx_register,
+ .ndo_vlan_rx_kill_vid = s2io_vlan_rx_kill_vid,
+ .ndo_tx_timeout = s2io_tx_watchdog,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = s2io_netpoll,
+#endif
+};
+
/**
* s2io_init_nic - Initialization of the adapter .
* @pdev : structure containing the PCI related information of the device.
}
/* Driver entry points */
- dev->open = &s2io_open;
- dev->stop = &s2io_close;
- dev->hard_start_xmit = &s2io_xmit;
- dev->get_stats = &s2io_get_stats;
- dev->set_multicast_list = &s2io_set_multicast;
- dev->do_ioctl = &s2io_ioctl;
- dev->set_mac_address = &s2io_set_mac_addr;
- dev->change_mtu = &s2io_change_mtu;
+ dev->netdev_ops = &s2io_netdev_ops;
SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
- dev->vlan_rx_register = s2io_vlan_rx_register;
- dev->vlan_rx_kill_vid = (void *)s2io_vlan_rx_kill_vid;
-
- /*
- * will use eth_mac_addr() for dev->set_mac_address
- * mac address will be set every time dev->open() is called
- */
-#ifdef CONFIG_NET_POLL_CONTROLLER
- dev->poll_controller = s2io_netpoll;
-#endif
dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM;
if (sp->high_dma_flag == TRUE)
dev->features |= NETIF_F_UFO;
dev->features |= NETIF_F_HW_CSUM;
}
- dev->tx_timeout = &s2io_tx_watchdog;
dev->watchdog_timeo = WATCH_DOG_TIMEOUT;
INIT_WORK(&sp->rst_timer_task, s2io_restart_nic);
INIT_WORK(&sp->set_link_task, s2io_set_link);
if (ret) {
DBG_PRINT(ERR_DBG,
- "%s: MSI-X requested but failed to enable\n",
- dev->name);
+ "s2io: MSI-X requested but failed to enable\n");
sp->config.intr_type = INTA;
}
}