#include "wmi-ops.h"
unsigned int ath10k_debug_mask;
+static unsigned int ath10k_cryptmode_param;
static bool uart_print;
static bool skip_otp;
+static bool rawmode;
module_param_named(debug_mask, ath10k_debug_mask, uint, 0644);
+module_param_named(cryptmode, ath10k_cryptmode_param, uint, 0644);
module_param(uart_print, bool, 0644);
module_param(skip_otp, bool, 0644);
+module_param(rawmode, bool, 0644);
MODULE_PARM_DESC(debug_mask, "Debugging mask");
MODULE_PARM_DESC(uart_print, "Uart target debugging");
MODULE_PARM_DESC(skip_otp, "Skip otp failure for calibration in testmode");
+MODULE_PARM_DESC(cryptmode, "Crypto mode: 0-hardware, 1-software");
+MODULE_PARM_DESC(rawmode, "Use raw 802.11 frame datapath");
static const struct ath10k_hw_params ath10k_hw_params_list[] = {
{
.patch_load_addr = QCA988X_HW_2_0_PATCH_LOAD_ADDR,
.uart_pin = 7,
.has_shifted_cc_wraparound = true,
+ .otp_exe_param = 0,
+ .channel_counters_freq_hz = 88000,
+ .max_probe_resp_desc_thres = 0,
.fw = {
.dir = QCA988X_HW_2_0_FW_DIR,
.fw = QCA988X_HW_2_0_FW_FILE,
.name = "qca6174 hw2.1",
.patch_load_addr = QCA6174_HW_2_1_PATCH_LOAD_ADDR,
.uart_pin = 6,
+ .otp_exe_param = 0,
+ .channel_counters_freq_hz = 88000,
+ .max_probe_resp_desc_thres = 0,
.fw = {
.dir = QCA6174_HW_2_1_FW_DIR,
.fw = QCA6174_HW_2_1_FW_FILE,
.name = "qca6174 hw3.0",
.patch_load_addr = QCA6174_HW_3_0_PATCH_LOAD_ADDR,
.uart_pin = 6,
+ .otp_exe_param = 0,
+ .channel_counters_freq_hz = 88000,
+ .max_probe_resp_desc_thres = 0,
.fw = {
.dir = QCA6174_HW_3_0_FW_DIR,
.fw = QCA6174_HW_3_0_FW_FILE,
.name = "qca6174 hw3.2",
.patch_load_addr = QCA6174_HW_3_0_PATCH_LOAD_ADDR,
.uart_pin = 6,
+ .otp_exe_param = 0,
+ .channel_counters_freq_hz = 88000,
+ .max_probe_resp_desc_thres = 0,
.fw = {
/* uses same binaries as hw3.0 */
.dir = QCA6174_HW_3_0_FW_DIR,
.board_ext_size = QCA6174_BOARD_EXT_DATA_SZ,
},
},
+ {
+ .id = QCA99X0_HW_2_0_DEV_VERSION,
+ .name = "qca99x0 hw2.0",
+ .patch_load_addr = QCA99X0_HW_2_0_PATCH_LOAD_ADDR,
+ .uart_pin = 7,
+ .otp_exe_param = 0x00000700,
+ .continuous_frag_desc = true,
+ .channel_counters_freq_hz = 150000,
+ .max_probe_resp_desc_thres = 24,
+ .fw = {
+ .dir = QCA99X0_HW_2_0_FW_DIR,
+ .fw = QCA99X0_HW_2_0_FW_FILE,
+ .otp = QCA99X0_HW_2_0_OTP_FILE,
+ .board = QCA99X0_HW_2_0_BOARD_DATA_FILE,
+ .board_size = QCA99X0_BOARD_DATA_SZ,
+ .board_ext_size = QCA99X0_BOARD_EXT_DATA_SZ,
+ },
+ },
+};
+
+static const char *const ath10k_core_fw_feature_str[] = {
+ [ATH10K_FW_FEATURE_EXT_WMI_MGMT_RX] = "wmi-mgmt-rx",
+ [ATH10K_FW_FEATURE_WMI_10X] = "wmi-10.x",
+ [ATH10K_FW_FEATURE_HAS_WMI_MGMT_TX] = "has-wmi-mgmt-tx",
+ [ATH10K_FW_FEATURE_NO_P2P] = "no-p2p",
+ [ATH10K_FW_FEATURE_WMI_10_2] = "wmi-10.2",
+ [ATH10K_FW_FEATURE_MULTI_VIF_PS_SUPPORT] = "multi-vif-ps",
+ [ATH10K_FW_FEATURE_WOWLAN_SUPPORT] = "wowlan",
+ [ATH10K_FW_FEATURE_IGNORE_OTP_RESULT] = "ignore-otp",
+ [ATH10K_FW_FEATURE_NO_NWIFI_DECAP_4ADDR_PADDING] = "no-4addr-pad",
+ [ATH10K_FW_FEATURE_SUPPORTS_SKIP_CLOCK_INIT] = "skip-clock-init",
+ [ATH10K_FW_FEATURE_RAW_MODE_SUPPORT] = "raw-mode",
};
+static unsigned int ath10k_core_get_fw_feature_str(char *buf,
+ size_t buf_len,
+ enum ath10k_fw_features feat)
+{
+ /* make sure that ath10k_core_fw_feature_str[] gets updated */
+ BUILD_BUG_ON(ARRAY_SIZE(ath10k_core_fw_feature_str) !=
+ ATH10K_FW_FEATURE_COUNT);
+
+ if (feat >= ARRAY_SIZE(ath10k_core_fw_feature_str) ||
+ WARN_ON(!ath10k_core_fw_feature_str[feat])) {
+ return scnprintf(buf, buf_len, "bit%d", feat);
+ }
+
+ return scnprintf(buf, buf_len, "%s", ath10k_core_fw_feature_str[feat]);
+}
+
+void ath10k_core_get_fw_features_str(struct ath10k *ar,
+ char *buf,
+ size_t buf_len)
+{
+ unsigned int len = 0;
+ int i;
+
+ for (i = 0; i < ATH10K_FW_FEATURE_COUNT; i++) {
+ if (test_bit(i, ar->fw_features)) {
+ if (len > 0)
+ len += scnprintf(buf + len, buf_len - len, ",");
+
+ len += ath10k_core_get_fw_feature_str(buf + len,
+ buf_len - len,
+ i);
+ }
+ }
+}
+
static void ath10k_send_suspend_complete(struct ath10k *ar)
{
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot suspend complete\n");
return ret;
}
+ /* Some devices have a special sanity check that verifies the PCI
+ * Device ID is written to this host interest var. It is known to be
+ * required to boot QCA6164.
+ */
+ ret = ath10k_bmi_write32(ar, hi_hci_uart_pwr_mgmt_params_ext,
+ ar->dev_id);
+ if (ret) {
+ ath10k_err(ar, "failed to set pwr_mgmt_params: %d\n", ret);
+ return ret;
+ }
+
return 0;
}
return ret;
}
+static int ath10k_core_get_board_id_from_otp(struct ath10k *ar)
+{
+ u32 result, address;
+ u8 board_id, chip_id;
+ int ret;
+
+ address = ar->hw_params.patch_load_addr;
+
+ if (!ar->otp_data || !ar->otp_len) {
+ ath10k_warn(ar,
+ "failed to retrieve board id because of invalid otp\n");
+ return -ENODATA;
+ }
+
+ ath10k_dbg(ar, ATH10K_DBG_BOOT,
+ "boot upload otp to 0x%x len %zd for board id\n",
+ address, ar->otp_len);
+
+ ret = ath10k_bmi_fast_download(ar, address, ar->otp_data, ar->otp_len);
+ if (ret) {
+ ath10k_err(ar, "could not write otp for board id check: %d\n",
+ ret);
+ return ret;
+ }
+
+ ret = ath10k_bmi_execute(ar, address, BMI_PARAM_GET_EEPROM_BOARD_ID,
+ &result);
+ if (ret) {
+ ath10k_err(ar, "could not execute otp for board id check: %d\n",
+ ret);
+ return ret;
+ }
+
+ board_id = MS(result, ATH10K_BMI_BOARD_ID_FROM_OTP);
+ chip_id = MS(result, ATH10K_BMI_CHIP_ID_FROM_OTP);
+
+ ath10k_dbg(ar, ATH10K_DBG_BOOT,
+ "boot get otp board id result 0x%08x board_id %d chip_id %d\n",
+ result, board_id, chip_id);
+
+ if ((result & ATH10K_BMI_BOARD_ID_STATUS_MASK) != 0)
+ return -EOPNOTSUPP;
+
+ ar->id.bmi_ids_valid = true;
+ ar->id.bmi_board_id = board_id;
+ ar->id.bmi_chip_id = chip_id;
+
+ return 0;
+}
+
static int ath10k_download_and_run_otp(struct ath10k *ar)
{
u32 result, address = ar->hw_params.patch_load_addr;
+ u32 bmi_otp_exe_param = ar->hw_params.otp_exe_param;
int ret;
ret = ath10k_download_board_data(ar, ar->board_data, ar->board_len);
return ret;
}
- ret = ath10k_bmi_execute(ar, address, 0, &result);
+ ret = ath10k_bmi_execute(ar, address, bmi_otp_exe_param, &result);
if (ret) {
ath10k_err(ar, "could not execute otp (%d)\n", ret);
return ret;
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot otp execute result %d\n", result);
if (!(skip_otp || test_bit(ATH10K_FW_FEATURE_IGNORE_OTP_RESULT,
- ar->fw_features))
- && result != 0) {
+ ar->fw_features)) &&
+ result != 0) {
ath10k_err(ar, "otp calibration failed: %d", result);
return -EINVAL;
}
data = ar->firmware_data;
data_len = ar->firmware_len;
mode_name = "normal";
+ ret = ath10k_swap_code_seg_configure(ar,
+ ATH10K_SWAP_CODE_SEG_BIN_TYPE_FW);
+ if (ret) {
+ ath10k_err(ar, "failed to configure fw code swap: %d\n",
+ ret);
+ return ret;
+ }
break;
case ATH10K_FIRMWARE_MODE_UTF:
data = ar->testmode.utf->data;
return ret;
}
-static void ath10k_core_free_firmware_files(struct ath10k *ar)
+static void ath10k_core_free_board_files(struct ath10k *ar)
{
if (!IS_ERR(ar->board))
release_firmware(ar->board);
+ ar->board = NULL;
+ ar->board_data = NULL;
+ ar->board_len = 0;
+}
+
+static void ath10k_core_free_firmware_files(struct ath10k *ar)
+{
if (!IS_ERR(ar->otp))
release_firmware(ar->otp);
if (!IS_ERR(ar->cal_file))
release_firmware(ar->cal_file);
- ar->board = NULL;
- ar->board_data = NULL;
- ar->board_len = 0;
+ ath10k_swap_code_seg_release(ar);
ar->otp = NULL;
ar->otp_data = NULL;
return 0;
}
-static int ath10k_core_fetch_spec_board_file(struct ath10k *ar)
+static int ath10k_core_fetch_board_data_api_1(struct ath10k *ar)
{
- char filename[100];
-
- scnprintf(filename, sizeof(filename), "board-%s-%s.bin",
- ath10k_bus_str(ar->hif.bus), ar->spec_board_id);
+ if (!ar->hw_params.fw.board) {
+ ath10k_err(ar, "failed to find board file fw entry\n");
+ return -EINVAL;
+ }
- ar->board = ath10k_fetch_fw_file(ar, ar->hw_params.fw.dir, filename);
+ ar->board = ath10k_fetch_fw_file(ar,
+ ar->hw_params.fw.dir,
+ ar->hw_params.fw.board);
if (IS_ERR(ar->board))
return PTR_ERR(ar->board);
ar->board_data = ar->board->data;
ar->board_len = ar->board->size;
- ar->spec_board_loaded = true;
return 0;
}
-static int ath10k_core_fetch_generic_board_file(struct ath10k *ar)
+static int ath10k_core_parse_bd_ie_board(struct ath10k *ar,
+ const void *buf, size_t buf_len,
+ const char *boardname)
{
- if (!ar->hw_params.fw.board) {
- ath10k_err(ar, "failed to find board file fw entry\n");
- return -EINVAL;
+ const struct ath10k_fw_ie *hdr;
+ bool name_match_found;
+ int ret, board_ie_id;
+ size_t board_ie_len;
+ const void *board_ie_data;
+
+ name_match_found = false;
+
+ /* go through ATH10K_BD_IE_BOARD_ elements */
+ while (buf_len > sizeof(struct ath10k_fw_ie)) {
+ hdr = buf;
+ board_ie_id = le32_to_cpu(hdr->id);
+ board_ie_len = le32_to_cpu(hdr->len);
+ board_ie_data = hdr->data;
+
+ buf_len -= sizeof(*hdr);
+ buf += sizeof(*hdr);
+
+ if (buf_len < ALIGN(board_ie_len, 4)) {
+ ath10k_err(ar, "invalid ATH10K_BD_IE_BOARD length: %zu < %zu\n",
+ buf_len, ALIGN(board_ie_len, 4));
+ ret = -EINVAL;
+ goto out;
+ }
+
+ switch (board_ie_id) {
+ case ATH10K_BD_IE_BOARD_NAME:
+ ath10k_dbg_dump(ar, ATH10K_DBG_BOOT, "board name", "",
+ board_ie_data, board_ie_len);
+
+ if (board_ie_len != strlen(boardname))
+ break;
+
+ ret = memcmp(board_ie_data, boardname, strlen(boardname));
+ if (ret)
+ break;
+
+ name_match_found = true;
+ ath10k_dbg(ar, ATH10K_DBG_BOOT,
+ "boot found match for name '%s'",
+ boardname);
+ break;
+ case ATH10K_BD_IE_BOARD_DATA:
+ if (!name_match_found)
+ /* no match found */
+ break;
+
+ ath10k_dbg(ar, ATH10K_DBG_BOOT,
+ "boot found board data for '%s'",
+ boardname);
+
+ ar->board_data = board_ie_data;
+ ar->board_len = board_ie_len;
+
+ ret = 0;
+ goto out;
+ default:
+ ath10k_warn(ar, "unknown ATH10K_BD_IE_BOARD found: %d\n",
+ board_ie_id);
+ break;
+ }
+
+ /* jump over the padding */
+ board_ie_len = ALIGN(board_ie_len, 4);
+
+ buf_len -= board_ie_len;
+ buf += board_ie_len;
}
- ar->board = ath10k_fetch_fw_file(ar,
- ar->hw_params.fw.dir,
- ar->hw_params.fw.board);
+ /* no match found */
+ ret = -ENOENT;
+
+out:
+ return ret;
+}
+
+static int ath10k_core_fetch_board_data_api_n(struct ath10k *ar,
+ const char *boardname,
+ const char *filename)
+{
+ size_t len, magic_len, ie_len;
+ struct ath10k_fw_ie *hdr;
+ const u8 *data;
+ int ret, ie_id;
+
+ ar->board = ath10k_fetch_fw_file(ar, ar->hw_params.fw.dir, filename);
if (IS_ERR(ar->board))
return PTR_ERR(ar->board);
- ar->board_data = ar->board->data;
- ar->board_len = ar->board->size;
- ar->spec_board_loaded = false;
+ data = ar->board->data;
+ len = ar->board->size;
+
+ /* magic has extra null byte padded */
+ magic_len = strlen(ATH10K_BOARD_MAGIC) + 1;
+ if (len < magic_len) {
+ ath10k_err(ar, "failed to find magic value in %s/%s, file too short: %zu\n",
+ ar->hw_params.fw.dir, filename, len);
+ ret = -EINVAL;
+ goto err;
+ }
+
+ if (memcmp(data, ATH10K_BOARD_MAGIC, magic_len)) {
+ ath10k_err(ar, "found invalid board magic\n");
+ ret = -EINVAL;
+ goto err;
+ }
+
+ /* magic is padded to 4 bytes */
+ magic_len = ALIGN(magic_len, 4);
+ if (len < magic_len) {
+ ath10k_err(ar, "failed: %s/%s too small to contain board data, len: %zu\n",
+ ar->hw_params.fw.dir, filename, len);
+ ret = -EINVAL;
+ goto err;
+ }
+
+ data += magic_len;
+ len -= magic_len;
+
+ while (len > sizeof(struct ath10k_fw_ie)) {
+ hdr = (struct ath10k_fw_ie *)data;
+ ie_id = le32_to_cpu(hdr->id);
+ ie_len = le32_to_cpu(hdr->len);
+
+ len -= sizeof(*hdr);
+ data = hdr->data;
+
+ if (len < ALIGN(ie_len, 4)) {
+ ath10k_err(ar, "invalid length for board ie_id %d ie_len %zu len %zu\n",
+ ie_id, ie_len, len);
+ ret = -EINVAL;
+ goto err;
+ }
+
+ switch (ie_id) {
+ case ATH10K_BD_IE_BOARD:
+ ret = ath10k_core_parse_bd_ie_board(ar, data, ie_len,
+ boardname);
+ if (ret == -ENOENT)
+ /* no match found, continue */
+ break;
+ else if (ret)
+ /* there was an error, bail out */
+ goto err;
+
+ /* board data found */
+ goto out;
+ }
+
+ /* jump over the padding */
+ ie_len = ALIGN(ie_len, 4);
+
+ len -= ie_len;
+ data += ie_len;
+ }
+
+out:
+ if (!ar->board_data || !ar->board_len) {
+ ath10k_err(ar,
+ "failed to fetch board data for %s from %s/%s\n",
+ ar->hw_params.fw.dir, boardname, filename);
+ ret = -ENODATA;
+ goto err;
+ }
+
+ return 0;
+
+err:
+ ath10k_core_free_board_files(ar);
+ return ret;
+}
+
+static int ath10k_core_create_board_name(struct ath10k *ar, char *name,
+ size_t name_len)
+{
+ if (ar->id.bmi_ids_valid) {
+ scnprintf(name, name_len,
+ "bus=%s,bmi-chip-id=%d,bmi-board-id=%d",
+ ath10k_bus_str(ar->hif.bus),
+ ar->id.bmi_chip_id,
+ ar->id.bmi_board_id);
+ goto out;
+ }
+
+ scnprintf(name, name_len,
+ "bus=%s,vendor=%04x,device=%04x,subsystem-vendor=%04x,subsystem-device=%04x",
+ ath10k_bus_str(ar->hif.bus),
+ ar->id.vendor, ar->id.device,
+ ar->id.subsystem_vendor, ar->id.subsystem_device);
+
+out:
+ ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot using board name '%s'\n", name);
return 0;
}
static int ath10k_core_fetch_board_file(struct ath10k *ar)
{
+ char boardname[100];
int ret;
- if (strlen(ar->spec_board_id) > 0) {
- ret = ath10k_core_fetch_spec_board_file(ar);
- if (ret) {
- ath10k_info(ar, "failed to load spec board file, falling back to generic: %d\n",
- ret);
- goto generic;
- }
-
- ath10k_dbg(ar, ATH10K_DBG_BOOT, "found specific board file for %s\n",
- ar->spec_board_id);
- return 0;
+ ret = ath10k_core_create_board_name(ar, boardname, sizeof(boardname));
+ if (ret) {
+ ath10k_err(ar, "failed to create board name: %d", ret);
+ return ret;
}
-generic:
- ret = ath10k_core_fetch_generic_board_file(ar);
+ ar->bd_api = 2;
+ ret = ath10k_core_fetch_board_data_api_n(ar, boardname,
+ ATH10K_BOARD_API2_FILE);
+ if (!ret)
+ goto success;
+
+ ar->bd_api = 1;
+ ret = ath10k_core_fetch_board_data_api_1(ar);
if (ret) {
- ath10k_err(ar, "failed to fetch generic board data: %d\n", ret);
+ ath10k_err(ar, "failed to fetch board data\n");
return ret;
}
+success:
+ ath10k_dbg(ar, ATH10K_DBG_BOOT, "using board api %d\n", ar->bd_api);
return 0;
}
ath10k_dbg(ar, ATH10K_DBG_BOOT, "found fw ie htt op version %d\n",
ar->htt.op_version);
break;
+ case ATH10K_FW_IE_FW_CODE_SWAP_IMAGE:
+ ath10k_dbg(ar, ATH10K_DBG_BOOT,
+ "found fw code swap image ie (%zd B)\n",
+ ie_len);
+ ar->swap.firmware_codeswap_data = data;
+ ar->swap.firmware_codeswap_len = ie_len;
+ break;
default:
ath10k_warn(ar, "Unknown FW IE: %u\n",
le32_to_cpu(hdr->id));
/* calibration file is optional, don't check for any errors */
ath10k_fetch_cal_file(ar);
- ret = ath10k_core_fetch_board_file(ar);
- if (ret) {
- ath10k_err(ar, "failed to fetch board file: %d\n", ret);
- return ret;
- }
-
ar->fw_api = 5;
ath10k_dbg(ar, ATH10K_DBG_BOOT, "trying fw api %d\n", ar->fw_api);
return -EINVAL;
}
+ ar->wmi.rx_decap_mode = ATH10K_HW_TXRX_NATIVE_WIFI;
+ switch (ath10k_cryptmode_param) {
+ case ATH10K_CRYPT_MODE_HW:
+ clear_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags);
+ clear_bit(ATH10K_FLAG_HW_CRYPTO_DISABLED, &ar->dev_flags);
+ break;
+ case ATH10K_CRYPT_MODE_SW:
+ if (!test_bit(ATH10K_FW_FEATURE_RAW_MODE_SUPPORT,
+ ar->fw_features)) {
+ ath10k_err(ar, "cryptmode > 0 requires raw mode support from firmware");
+ return -EINVAL;
+ }
+
+ set_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags);
+ set_bit(ATH10K_FLAG_HW_CRYPTO_DISABLED, &ar->dev_flags);
+ break;
+ default:
+ ath10k_info(ar, "invalid cryptmode: %d\n",
+ ath10k_cryptmode_param);
+ return -EINVAL;
+ }
+
+ ar->htt.max_num_amsdu = ATH10K_HTT_MAX_NUM_AMSDU_DEFAULT;
+ ar->htt.max_num_ampdu = ATH10K_HTT_MAX_NUM_AMPDU_DEFAULT;
+
+ if (rawmode) {
+ if (!test_bit(ATH10K_FW_FEATURE_RAW_MODE_SUPPORT,
+ ar->fw_features)) {
+ ath10k_err(ar, "rawmode = 1 requires support from firmware");
+ return -EINVAL;
+ }
+ set_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags);
+ }
+
+ if (test_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags)) {
+ ar->wmi.rx_decap_mode = ATH10K_HW_TXRX_RAW;
+
+ /* Workaround:
+ *
+ * Firmware A-MSDU aggregation breaks with RAW Tx encap mode
+ * and causes enormous performance issues (malformed frames,
+ * etc).
+ *
+ * Disabling A-MSDU makes RAW mode stable with heavy traffic
+ * albeit a bit slower compared to regular operation.
+ */
+ ar->htt.max_num_amsdu = 1;
+ }
+
/* Backwards compatibility for firmwares without
* ATH10K_FW_IE_WMI_OP_VERSION.
*/
ar->htt.max_num_pending_tx = TARGET_NUM_MSDU_DESC;
ar->fw_stats_req_mask = WMI_STAT_PDEV | WMI_STAT_VDEV |
WMI_STAT_PEER;
+ ar->max_spatial_stream = WMI_MAX_SPATIAL_STREAM;
break;
case ATH10K_FW_WMI_OP_VERSION_10_1:
case ATH10K_FW_WMI_OP_VERSION_10_2:
ar->max_num_vdevs = TARGET_10X_NUM_VDEVS;
ar->htt.max_num_pending_tx = TARGET_10X_NUM_MSDU_DESC;
ar->fw_stats_req_mask = WMI_STAT_PEER;
+ ar->max_spatial_stream = WMI_MAX_SPATIAL_STREAM;
break;
case ATH10K_FW_WMI_OP_VERSION_TLV:
ar->max_num_peers = TARGET_TLV_NUM_PEERS;
ar->wow.max_num_patterns = TARGET_TLV_NUM_WOW_PATTERNS;
ar->fw_stats_req_mask = WMI_STAT_PDEV | WMI_STAT_VDEV |
WMI_STAT_PEER;
+ ar->max_spatial_stream = WMI_MAX_SPATIAL_STREAM;
+ break;
+ case ATH10K_FW_WMI_OP_VERSION_10_4:
+ ar->max_num_peers = TARGET_10_4_NUM_PEERS;
+ ar->max_num_stations = TARGET_10_4_NUM_STATIONS;
+ ar->num_active_peers = TARGET_10_4_ACTIVE_PEERS;
+ ar->max_num_vdevs = TARGET_10_4_NUM_VDEVS;
+ ar->num_tids = TARGET_10_4_TGT_NUM_TIDS;
+ ar->htt.max_num_pending_tx = TARGET_10_4_NUM_MSDU_DESC;
+ ar->fw_stats_req_mask = WMI_STAT_PEER;
+ ar->max_spatial_stream = WMI_10_4_MAX_SPATIAL_STREAM;
break;
case ATH10K_FW_WMI_OP_VERSION_UNSET:
case ATH10K_FW_WMI_OP_VERSION_MAX:
case ATH10K_FW_WMI_OP_VERSION_TLV:
ar->htt.op_version = ATH10K_FW_HTT_OP_VERSION_TLV;
break;
+ case ATH10K_FW_WMI_OP_VERSION_10_4:
case ATH10K_FW_WMI_OP_VERSION_UNSET:
case ATH10K_FW_WMI_OP_VERSION_MAX:
WARN_ON(1);
goto err;
/* Some of of qca988x solutions are having global reset issue
- * during target initialization. Bypassing PLL setting before
- * downloading firmware and letting the SoC run on REF_CLK is
- * fixing the problem. Corresponding firmware change is also needed
- * to set the clock source once the target is initialized.
+ * during target initialization. Bypassing PLL setting before
+ * downloading firmware and letting the SoC run on REF_CLK is
+ * fixing the problem. Corresponding firmware change is also needed
+ * to set the clock source once the target is initialized.
*/
if (test_bit(ATH10K_FW_FEATURE_SUPPORTS_SKIP_CLOCK_INIT,
ar->fw_features)) {
void ath10k_core_stop(struct ath10k *ar)
{
lockdep_assert_held(&ar->conf_mutex);
+ ath10k_debug_stop(ar);
/* try to suspend target */
if (ar->state != ATH10K_STATE_RESTARTING &&
ar->state != ATH10K_STATE_UTF)
ath10k_wait_for_suspend(ar, WMI_PDEV_SUSPEND_AND_DISABLE_INTR);
- ath10k_debug_stop(ar);
ath10k_hif_stop(ar);
ath10k_htt_tx_free(&ar->htt);
ath10k_htt_rx_free(&ar->htt);
goto err_power_down;
}
+ ret = ath10k_core_get_board_id_from_otp(ar);
+ if (ret && ret != -EOPNOTSUPP) {
+ ath10k_err(ar, "failed to get board id from otp for qca99x0: %d\n",
+ ret);
+ return ret;
+ }
+
+ ret = ath10k_core_fetch_board_file(ar);
+ if (ret) {
+ ath10k_err(ar, "failed to fetch board file: %d\n", ret);
+ goto err_free_firmware_files;
+ }
+
ret = ath10k_core_init_firmware_features(ar);
if (ret) {
ath10k_err(ar, "fatal problem with firmware features: %d\n",
goto err_free_firmware_files;
}
+ ret = ath10k_swap_code_seg_init(ar);
+ if (ret) {
+ ath10k_err(ar, "failed to initialize code swap segment: %d\n",
+ ret);
+ goto err_free_firmware_files;
+ }
+
mutex_lock(&ar->conf_mutex);
ret = ath10k_core_start(ar, ATH10K_FIRMWARE_MODE_NORMAL);
ath10k_testmode_destroy(ar);
ath10k_core_free_firmware_files(ar);
+ ath10k_core_free_board_files(ar);
ath10k_debug_unregister(ar);
}
switch (hw_rev) {
case ATH10K_HW_QCA988X:
ar->regs = &qca988x_regs;
+ ar->hw_values = &qca988x_values;
break;
case ATH10K_HW_QCA6174:
ar->regs = &qca6174_regs;
+ ar->hw_values = &qca6174_values;
+ break;
+ case ATH10K_HW_QCA99X0:
+ ar->regs = &qca99x0_regs;
+ ar->hw_values = &qca99x0_values;
break;
default:
ath10k_err(ar, "unsupported core hardware revision %d\n",
if (!ar->workqueue)
goto err_free_mac;
+ ar->workqueue_aux = create_singlethread_workqueue("ath10k_aux_wq");
+ if (!ar->workqueue_aux)
+ goto err_free_wq;
+
mutex_init(&ar->conf_mutex);
spin_lock_init(&ar->data_lock);
ret = ath10k_debug_create(ar);
if (ret)
- goto err_free_wq;
+ goto err_free_aux_wq;
return ar;
+err_free_aux_wq:
+ destroy_workqueue(ar->workqueue_aux);
err_free_wq:
destroy_workqueue(ar->workqueue);
flush_workqueue(ar->workqueue);
destroy_workqueue(ar->workqueue);
+ flush_workqueue(ar->workqueue_aux);
+ destroy_workqueue(ar->workqueue_aux);
+
ath10k_debug_destroy(ar);
+ ath10k_wmi_free_host_mem(ar);
ath10k_mac_destroy(ar);
}
EXPORT_SYMBOL(ath10k_core_destroy);
projects / linux-beck.git / blobdiff