#include "htt.h"
#include "txrx.h"
#include "testmode.h"
+#include "wmi.h"
+#include "wmi-ops.h"
/**********/
/* Crypto */
case IEEE80211_BAND_2GHZ:
switch (chandef->width) {
case NL80211_CHAN_WIDTH_20_NOHT:
- phymode = MODE_11G;
+ if (chandef->chan->flags & IEEE80211_CHAN_NO_OFDM)
+ phymode = MODE_11B;
+ else
+ phymode = MODE_11G;
break;
case NL80211_CHAN_WIDTH_20:
phymode = MODE_11NG_HT20;
arvif->vdev_id, ret);
}
-/*
- * Review this when mac80211 gains per-interface powersave support.
- */
+static int ath10k_mac_vif_recalc_ps_wake_threshold(struct ath10k_vif *arvif)
+{
+ struct ath10k *ar = arvif->ar;
+ u32 param;
+ u32 value;
+ int ret;
+
+ lockdep_assert_held(&arvif->ar->conf_mutex);
+
+ if (arvif->u.sta.uapsd)
+ value = WMI_STA_PS_TX_WAKE_THRESHOLD_NEVER;
+ else
+ value = WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS;
+
+ param = WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD;
+ ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id, param, value);
+ if (ret) {
+ ath10k_warn(ar, "failed to submit ps wake threshold %u on vdev %i: %d\n",
+ value, arvif->vdev_id, ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int ath10k_mac_vif_recalc_ps_poll_count(struct ath10k_vif *arvif)
+{
+ struct ath10k *ar = arvif->ar;
+ u32 param;
+ u32 value;
+ int ret;
+
+ lockdep_assert_held(&arvif->ar->conf_mutex);
+
+ if (arvif->u.sta.uapsd)
+ value = WMI_STA_PS_PSPOLL_COUNT_UAPSD;
+ else
+ value = WMI_STA_PS_PSPOLL_COUNT_NO_MAX;
+
+ param = WMI_STA_PS_PARAM_PSPOLL_COUNT;
+ ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id,
+ param, value);
+ if (ret) {
+ ath10k_warn(ar, "failed to submit ps poll count %u on vdev %i: %d\n",
+ value, arvif->vdev_id, ret);
+ return ret;
+ }
+
+ return 0;
+}
+
static int ath10k_mac_vif_setup_ps(struct ath10k_vif *arvif)
{
struct ath10k *ar = arvif->ar;
+ struct ieee80211_vif *vif = arvif->vif;
struct ieee80211_conf *conf = &ar->hw->conf;
enum wmi_sta_powersave_param param;
enum wmi_sta_ps_mode psmode;
int ret;
+ int ps_timeout;
lockdep_assert_held(&arvif->ar->conf_mutex);
if (arvif->vif->type != NL80211_IFTYPE_STATION)
return 0;
- if (conf->flags & IEEE80211_CONF_PS) {
+ if (vif->bss_conf.ps) {
psmode = WMI_STA_PS_MODE_ENABLED;
param = WMI_STA_PS_PARAM_INACTIVITY_TIME;
+ ps_timeout = conf->dynamic_ps_timeout;
+ if (ps_timeout == 0) {
+ /* Firmware doesn't like 0 */
+ ps_timeout = ieee80211_tu_to_usec(
+ vif->bss_conf.beacon_int) / 1000;
+ }
+
ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id, param,
- conf->dynamic_ps_timeout);
+ ps_timeout);
if (ret) {
ath10k_warn(ar, "failed to set inactivity time for vdev %d: %i\n",
arvif->vdev_id, ret);
if (vif->bss_conf.qos)
arg->peer_flags |= WMI_PEER_QOS;
break;
+ case WMI_VDEV_TYPE_IBSS:
+ if (sta->wme)
+ arg->peer_flags |= WMI_PEER_QOS;
+ break;
default:
break;
}
+
+ ath10k_dbg(ar, ATH10K_DBG_MAC, "mac peer %pM qos %d\n",
+ sta->addr, !!(arg->peer_flags & WMI_PEER_QOS));
+}
+
+static bool ath10k_mac_sta_has_11g_rates(struct ieee80211_sta *sta)
+{
+ /* First 4 rates in ath10k_rates are CCK (11b) rates. */
+ return sta->supp_rates[IEEE80211_BAND_2GHZ] >> 4;
}
static void ath10k_peer_assoc_h_phymode(struct ath10k *ar,
phymode = MODE_11NG_HT40;
else
phymode = MODE_11NG_HT20;
- } else {
+ } else if (ath10k_mac_sta_has_11g_rates(sta)) {
phymode = MODE_11G;
+ } else {
+ phymode = MODE_11B;
}
break;
arvif->vdev_id = bit;
arvif->vdev_subtype = WMI_VDEV_SUBTYPE_NONE;
- if (ar->p2p)
- arvif->vdev_subtype = WMI_VDEV_SUBTYPE_P2P_DEVICE;
-
switch (vif->type) {
+ case NL80211_IFTYPE_P2P_DEVICE:
+ arvif->vdev_type = WMI_VDEV_TYPE_STA;
+ arvif->vdev_subtype = WMI_VDEV_SUBTYPE_P2P_DEVICE;
+ break;
case NL80211_IFTYPE_UNSPECIFIED:
case NL80211_IFTYPE_STATION:
arvif->vdev_type = WMI_VDEV_TYPE_STA;
goto err_peer_delete;
}
- param = WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD;
- value = WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS;
- ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id,
- param, value);
+ ret = ath10k_mac_vif_recalc_ps_wake_threshold(arvif);
if (ret) {
- ath10k_warn(ar, "failed to set vdev %i TX wake thresh: %d\n",
+ ath10k_warn(ar, "failed to recalc ps wake threshold on vdev %i: %d\n",
arvif->vdev_id, ret);
goto err_peer_delete;
}
- param = WMI_STA_PS_PARAM_PSPOLL_COUNT;
- value = WMI_STA_PS_PSPOLL_COUNT_NO_MAX;
- ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id,
- param, value);
+ ret = ath10k_mac_vif_recalc_ps_poll_count(arvif);
if (ret) {
- ath10k_warn(ar, "failed to set vdev %i PSPOLL count: %d\n",
+ ath10k_warn(ar, "failed to recalc ps poll count on vdev %i: %d\n",
arvif->vdev_id, ret);
goto err_peer_delete;
}
ath10k_warn(ar, "failed to recalc tx power: %d\n", ret);
}
+ if (changed & BSS_CHANGED_PS) {
+ ret = ath10k_mac_vif_setup_ps(arvif);
+ if (ret)
+ ath10k_warn(ar, "failed to setup ps on vdev %i: %d\n",
+ arvif->vdev_id, ret);
+ }
+
mutex_unlock(&ar->conf_mutex);
}
sta->addr, smps, err);
}
- if (changed & IEEE80211_RC_SUPP_RATES_CHANGED) {
- ath10k_dbg(ar, ATH10K_DBG_MAC, "mac update sta %pM supp rates\n",
+ if (changed & IEEE80211_RC_SUPP_RATES_CHANGED ||
+ changed & IEEE80211_RC_NSS_CHANGED) {
+ ath10k_dbg(ar, ATH10K_DBG_MAC, "mac update sta %pM supp rates/nss\n",
sta->addr);
err = ath10k_station_assoc(ar, arvif->vif, sta, true);
if (ret)
ath10k_warn(ar, "failed to set rx wake param: %d\n", ret);
+ ret = ath10k_mac_vif_recalc_ps_wake_threshold(arvif);
+ if (ret) {
+ ath10k_warn(ar, "failed to recalc ps wake threshold on vdev %i: %d\n",
+ arvif->vdev_id, ret);
+ return ret;
+ }
+
+ ret = ath10k_mac_vif_recalc_ps_poll_count(arvif);
+ if (ret) {
+ ath10k_warn(ar, "failed to recalc ps poll count on vdev %i: %d\n",
+ arvif->vdev_id, ret);
+ return ret;
+ }
+
exit:
return ret;
}
return ret;
}
-static int ath10k_set_frag_threshold(struct ieee80211_hw *hw, u32 value)
-{
- struct ath10k *ar = hw->priv;
- struct ath10k_vif *arvif;
- int ret = 0;
-
- mutex_lock(&ar->conf_mutex);
- list_for_each_entry(arvif, &ar->arvifs, list) {
- ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %d fragmentation threshold %d\n",
- arvif->vdev_id, value);
-
- ret = ath10k_mac_set_frag(arvif, value);
- if (ret) {
- ath10k_warn(ar, "failed to set fragmentation threshold for vdev %d: %d\n",
- arvif->vdev_id, ret);
- break;
- }
- }
- mutex_unlock(&ar->conf_mutex);
-
- return ret;
-}
-
static void ath10k_flush(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
u32 queues, bool drop)
{
.remain_on_channel = ath10k_remain_on_channel,
.cancel_remain_on_channel = ath10k_cancel_remain_on_channel,
.set_rts_threshold = ath10k_set_rts_threshold,
- .set_frag_threshold = ath10k_set_frag_threshold,
.flush = ath10k_flush,
.tx_last_beacon = ath10k_tx_last_beacon,
.set_antenna = ath10k_set_antenna,
CHAN5G(165, 5825, 0),
};
+/* Note: Be careful if you re-order these. There is code which depends on this
+ * ordering.
+ */
static struct ieee80211_rate ath10k_rates[] = {
/* CCK */
RATETAB_ENT(10, 0x82, 0),
.types = BIT(NL80211_IFTYPE_P2P_GO)
},
{
+ .max = 1,
+ .types = BIT(NL80211_IFTYPE_P2P_DEVICE)
+ },
+ {
.max = 7,
.types = BIT(NL80211_IFTYPE_AP)
},
if (!test_bit(ATH10K_FW_FEATURE_NO_P2P, ar->fw_features))
ar->hw->wiphy->interface_modes |=
+ BIT(NL80211_IFTYPE_P2P_DEVICE) |
BIT(NL80211_IFTYPE_P2P_CLIENT) |
BIT(NL80211_IFTYPE_P2P_GO);
*/
ar->hw->queues = 4;
- if (test_bit(ATH10K_FW_FEATURE_WMI_10X, ar->fw_features)) {
- ar->hw->wiphy->iface_combinations = ath10k_10x_if_comb;
- ar->hw->wiphy->n_iface_combinations =
- ARRAY_SIZE(ath10k_10x_if_comb);
- } else {
+ switch (ar->wmi.op_version) {
+ case ATH10K_FW_WMI_OP_VERSION_MAIN:
+ case ATH10K_FW_WMI_OP_VERSION_TLV:
ar->hw->wiphy->iface_combinations = ath10k_if_comb;
ar->hw->wiphy->n_iface_combinations =
ARRAY_SIZE(ath10k_if_comb);
-
ar->hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_ADHOC);
+ break;
+ case ATH10K_FW_WMI_OP_VERSION_10_1:
+ case ATH10K_FW_WMI_OP_VERSION_10_2:
+ case ATH10K_FW_WMI_OP_VERSION_10_2_4:
+ ar->hw->wiphy->iface_combinations = ath10k_10x_if_comb;
+ ar->hw->wiphy->n_iface_combinations =
+ ARRAY_SIZE(ath10k_10x_if_comb);
+ break;
+ case ATH10K_FW_WMI_OP_VERSION_UNSET:
+ case ATH10K_FW_WMI_OP_VERSION_MAX:
+ WARN_ON(1);
+ ret = -EINVAL;
+ goto err_free;
}
ar->hw->netdev_features = NETIF_F_HW_CSUM;