* hardware at the new frequency, and then re-enable
* the relevant bits of the h/w.
*/
- ath9k_hw_set_interrupts(ah, 0);
+ ath9k_hw_disable_interrupts(ah);
ath_drain_all_txq(sc, false);
spin_lock_bh(&sc->rx.pcu_lock);
ath_gen_timer_isr(sc->sc_ah);
/* re-enable hardware interrupt */
- ath9k_hw_set_interrupts(ah, ah->imask);
+ ath9k_hw_enable_interrupts(ah);
ath9k_ps_restore(sc);
}
* interrupt; otherwise it will continue to
* fire.
*/
- ath9k_hw_set_interrupts(ah, 0);
+ ath9k_hw_disable_interrupts(ah);
/*
* Let the hal handle the event. We assume
* it will clear whatever condition caused
spin_lock(&common->cc_lock);
ath9k_hw_proc_mib_event(ah);
spin_unlock(&common->cc_lock);
- ath9k_hw_set_interrupts(ah, ah->imask);
+ ath9k_hw_enable_interrupts(ah);
}
if (!(ah->caps.hw_caps & ATH9K_HW_CAP_AUTOSLEEP))
ath_debug_stat_interrupt(sc, status);
if (sched) {
- /* turn off every interrupt except SWBA */
- ath9k_hw_set_interrupts(ah, (ah->imask & ATH9K_INT_SWBA));
+ /* turn off every interrupt */
+ ath9k_hw_disable_interrupts(ah);
tasklet_schedule(&sc->intr_tq);
}
}
/* Disable interrupts */
- ath9k_hw_set_interrupts(ah, 0);
+ ath9k_hw_disable_interrupts(ah);
ath_drain_all_txq(sc, false); /* clear pending tx frames */
ieee80211_stop_queues(hw);
- ath9k_hw_set_interrupts(ah, 0);
+ ath9k_hw_disable_interrupts(ah);
ath_drain_all_txq(sc, retry_tx);
spin_lock_bh(&sc->rx.pcu_lock);
/* make sure h/w will not generate any interrupt
* before setting the invalid flag. */
- ath9k_hw_set_interrupts(ah, 0);
+ ath9k_hw_disable_interrupts(ah);
spin_lock_bh(&sc->rx.pcu_lock);
if (!(sc->sc_flags & SC_OP_INVALID)) {