#include "ath9k.h"
#include "btcoex.h"
-static void ath_cache_conf_rate(struct ath_softc *sc,
- struct ieee80211_conf *conf)
-{
- switch (conf->channel->band) {
- case IEEE80211_BAND_2GHZ:
- if (conf_is_ht20(conf))
- sc->cur_rate_mode = ATH9K_MODE_11NG_HT20;
- else if (conf_is_ht40_minus(conf))
- sc->cur_rate_mode = ATH9K_MODE_11NG_HT40MINUS;
- else if (conf_is_ht40_plus(conf))
- sc->cur_rate_mode = ATH9K_MODE_11NG_HT40PLUS;
- else
- sc->cur_rate_mode = ATH9K_MODE_11G;
- break;
- case IEEE80211_BAND_5GHZ:
- if (conf_is_ht20(conf))
- sc->cur_rate_mode = ATH9K_MODE_11NA_HT20;
- else if (conf_is_ht40_minus(conf))
- sc->cur_rate_mode = ATH9K_MODE_11NA_HT40MINUS;
- else if (conf_is_ht40_plus(conf))
- sc->cur_rate_mode = ATH9K_MODE_11NA_HT40PLUS;
- else
- sc->cur_rate_mode = ATH9K_MODE_11A;
- break;
- default:
- BUG_ON(1);
- break;
- }
-}
-
static void ath_update_txpow(struct ath_softc *sc)
{
struct ath_hw *ah = sc->sc_ah;
void ath9k_ps_wakeup(struct ath_softc *sc)
{
+ struct ath_common *common = ath9k_hw_common(sc->sc_ah);
unsigned long flags;
spin_lock_irqsave(&sc->sc_pm_lock, flags);
ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_AWAKE);
+ /*
+ * While the hardware is asleep, the cycle counters contain no
+ * useful data. Better clear them now so that they don't mess up
+ * survey data results.
+ */
+ spin_lock(&common->cc_lock);
+ ath_hw_cycle_counters_update(common);
+ memset(&common->cc_survey, 0, sizeof(common->cc_survey));
+ spin_unlock(&common->cc_lock);
+
unlock:
spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
}
void ath9k_ps_restore(struct ath_softc *sc)
{
+ struct ath_common *common = ath9k_hw_common(sc->sc_ah);
unsigned long flags;
spin_lock_irqsave(&sc->sc_pm_lock, flags);
if (--sc->ps_usecount != 0)
goto unlock;
+ spin_lock(&common->cc_lock);
+ ath_hw_cycle_counters_update(common);
+ spin_unlock(&common->cc_lock);
+
if (sc->ps_idle)
ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_FULL_SLEEP);
else if (sc->ps_enabled &&
msecs_to_jiffies((u32)ah->config.ani_poll_interval));
}
+static void ath_update_survey_nf(struct ath_softc *sc, int channel)
+{
+ struct ath_hw *ah = sc->sc_ah;
+ struct ath9k_channel *chan = &ah->channels[channel];
+ struct survey_info *survey = &sc->survey[channel];
+
+ if (chan->noisefloor) {
+ survey->filled |= SURVEY_INFO_NOISE_DBM;
+ survey->noise = chan->noisefloor;
+ }
+}
+
+static void ath_update_survey_stats(struct ath_softc *sc)
+{
+ struct ath_hw *ah = sc->sc_ah;
+ struct ath_common *common = ath9k_hw_common(ah);
+ int pos = ah->curchan - &ah->channels[0];
+ struct survey_info *survey = &sc->survey[pos];
+ struct ath_cycle_counters *cc = &common->cc_survey;
+ unsigned int div = common->clockrate * 1000;
+
+ if (!ah->curchan)
+ return;
+
+ if (ah->power_mode == ATH9K_PM_AWAKE)
+ ath_hw_cycle_counters_update(common);
+
+ if (cc->cycles > 0) {
+ survey->filled |= SURVEY_INFO_CHANNEL_TIME |
+ SURVEY_INFO_CHANNEL_TIME_BUSY |
+ SURVEY_INFO_CHANNEL_TIME_RX |
+ SURVEY_INFO_CHANNEL_TIME_TX;
+ survey->channel_time += cc->cycles / div;
+ survey->channel_time_busy += cc->rx_busy / div;
+ survey->channel_time_rx += cc->rx_frame / div;
+ survey->channel_time_tx += cc->tx_frame / div;
+ }
+ memset(cc, 0, sizeof(*cc));
+
+ ath_update_survey_nf(sc, pos);
+}
+
/*
* Set/change channels. If the channel is really being changed, it's done
* by reseting the chip. To accomplish this we must first cleanup any pending
goto ps_restore;
}
- ath_cache_conf_rate(sc, &hw->conf);
ath_update_txpow(sc);
ath9k_hw_set_interrupts(ah, ah->imask);
{
struct ath_hw *ah = sc->sc_ah;
struct ath9k_hw_cal_data *caldata = ah->caldata;
+ struct ath_common *common = ath9k_hw_common(ah);
int chain;
if (!caldata || !caldata->paprd_done)
ath9k_ps_wakeup(sc);
ar9003_paprd_enable(ah, false);
for (chain = 0; chain < AR9300_MAX_CHAINS; chain++) {
- if (!(ah->caps.tx_chainmask & BIT(chain)))
+ if (!(common->tx_chainmask & BIT(chain)))
continue;
ar9003_paprd_populate_single_table(ah, caldata, chain);
struct ieee80211_supported_band *sband = &sc->sbands[band];
struct ath_tx_control txctl;
struct ath9k_hw_cal_data *caldata = ah->caldata;
+ struct ath_common *common = ath9k_hw_common(ah);
int qnum, ftype;
int chain_ok = 0;
int chain;
ath9k_ps_wakeup(sc);
ar9003_paprd_init_table(ah);
for (chain = 0; chain < AR9300_MAX_CHAINS; chain++) {
- if (!(ah->caps.tx_chainmask & BIT(chain)))
+ if (!(common->tx_chainmask & BIT(chain)))
continue;
chain_ok = 0;
bool aniflag = false;
unsigned int timestamp = jiffies_to_msecs(jiffies);
u32 cal_interval, short_cal_interval, long_cal_interval;
+ unsigned long flags;
if (ah->caldata && ah->caldata->nfcal_interference)
long_cal_interval = ATH_LONG_CALINTERVAL_INT;
/* Skip all processing if there's nothing to do. */
if (longcal || shortcal || aniflag) {
/* Call ANI routine if necessary */
- if (aniflag)
+ if (aniflag) {
+ spin_lock_irqsave(&common->cc_lock, flags);
ath9k_hw_ani_monitor(ah, ah->curchan);
+ ath_update_survey_stats(sc);
+ spin_unlock_irqrestore(&common->cc_lock, flags);
+ }
/* Perform calibration if necessary */
if (longcal || shortcal) {
ah->curchan,
common->rx_chainmask,
longcal);
-
- if (longcal)
- common->ani.noise_floor = ath9k_hw_getchan_noise(ah,
- ah->curchan);
-
- ath_print(common, ATH_DBG_ANI,
- " calibrate chan %u/%x nf: %d\n",
- ah->curchan->channel,
- ah->curchan->channelFlags,
- common->ani.noise_floor);
}
}
msleep(1);
}
- ath_reset(sc, false);
+ ath_reset(sc, true);
out:
ath9k_ps_restore(sc);
ath9k_ps_wakeup(sc);
if (status & ATH9K_INT_FATAL) {
- ath_reset(sc, false);
+ ath_reset(sc, true);
ath9k_ps_restore(sc);
return;
}
struct ath_softc *sc = dev;
struct ath_hw *ah = sc->sc_ah;
+ struct ath_common *common = ath9k_hw_common(ah);
enum ath9k_int status;
bool sched = false;
if ((ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) &&
(status & ATH9K_INT_BB_WATCHDOG)) {
+
+ spin_lock(&common->cc_lock);
+ ath_hw_cycle_counters_update(common);
ar9003_hw_bb_watchdog_dbg_info(ah);
+ spin_unlock(&common->cc_lock);
+
goto chip_reset;
}
* it will clear whatever condition caused
* the interrupt.
*/
- ath9k_hw_procmibevent(ah);
+ spin_lock(&common->cc_lock);
+ ath9k_hw_proc_mib_event(ah);
+ spin_unlock(&common->cc_lock);
ath9k_hw_set_interrupts(ah, ah->imask);
}
* that changes the channel so update any state that
* might change as a result.
*/
- ath_cache_conf_rate(sc, &hw->conf);
-
ath_update_txpow(sc);
if ((sc->sc_flags & SC_OP_BEACONS) || !(sc->sc_flags & (SC_OP_OFFCHANNEL)))
if (ah->caps.hw_caps & ATH9K_HW_CAP_HT)
ah->imask |= ATH9K_INT_CST;
- ath_cache_conf_rate(sc, &hw->conf);
-
sc->sc_flags &= ~SC_OP_INVALID;
/* Disable BMISS interrupt when we're not associated */
case NL80211_IFTYPE_STATION:
ic_opmode = NL80211_IFTYPE_STATION;
break;
+ case NL80211_IFTYPE_WDS:
+ ic_opmode = NL80211_IFTYPE_WDS;
+ break;
case NL80211_IFTYPE_ADHOC:
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_MESH_POINT:
mutex_unlock(&sc->mutex);
}
-void ath9k_enable_ps(struct ath_softc *sc)
+static void ath9k_enable_ps(struct ath_softc *sc)
{
struct ath_hw *ah = sc->sc_ah;
}
}
+static void ath9k_disable_ps(struct ath_softc *sc)
+{
+ struct ath_hw *ah = sc->sc_ah;
+
+ sc->ps_enabled = false;
+ ath9k_hw_setpower(ah, ATH9K_PM_AWAKE);
+ if (!(ah->caps.hw_caps & ATH9K_HW_CAP_AUTOSLEEP)) {
+ ath9k_hw_setrxabort(ah, 0);
+ sc->ps_flags &= ~(PS_WAIT_FOR_BEACON |
+ PS_WAIT_FOR_CAB |
+ PS_WAIT_FOR_PSPOLL_DATA |
+ PS_WAIT_FOR_TX_ACK);
+ if (ah->imask & ATH9K_INT_TIM_TIMER) {
+ ah->imask &= ~ATH9K_INT_TIM_TIMER;
+ ath9k_hw_set_interrupts(ah, ah->imask);
+ }
+ }
+
+}
+
static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
{
struct ath_wiphy *aphy = hw->priv;
struct ath_softc *sc = aphy->sc;
- struct ath_common *common = ath9k_hw_common(sc->sc_ah);
- struct ieee80211_conf *conf = &hw->conf;
struct ath_hw *ah = sc->sc_ah;
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct ieee80211_conf *conf = &hw->conf;
bool disable_radio;
mutex_lock(&sc->mutex);
if (changed & IEEE80211_CONF_CHANGE_PS) {
unsigned long flags;
spin_lock_irqsave(&sc->sc_pm_lock, flags);
- if (conf->flags & IEEE80211_CONF_PS) {
- sc->ps_flags |= PS_ENABLED;
- /*
- * At this point we know hardware has received an ACK
- * of a previously sent null data frame.
- */
- if ((sc->ps_flags & PS_NULLFUNC_COMPLETED)) {
- sc->ps_flags &= ~PS_NULLFUNC_COMPLETED;
- ath9k_enable_ps(sc);
- }
- } else {
- sc->ps_enabled = false;
- sc->ps_flags &= ~(PS_ENABLED |
- PS_NULLFUNC_COMPLETED);
- ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_AWAKE);
- if (!(ah->caps.hw_caps &
- ATH9K_HW_CAP_AUTOSLEEP)) {
- ath9k_hw_setrxabort(sc->sc_ah, 0);
- sc->ps_flags &= ~(PS_WAIT_FOR_BEACON |
- PS_WAIT_FOR_CAB |
- PS_WAIT_FOR_PSPOLL_DATA |
- PS_WAIT_FOR_TX_ACK);
- if (ah->imask & ATH9K_INT_TIM_TIMER) {
- ah->imask &= ~ATH9K_INT_TIM_TIMER;
- ath9k_hw_set_interrupts(sc->sc_ah,
- ah->imask);
- }
- }
- }
+ if (conf->flags & IEEE80211_CONF_PS)
+ ath9k_enable_ps(sc);
+ else
+ ath9k_disable_ps(sc);
spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
}
if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
struct ieee80211_channel *curchan = hw->conf.channel;
int pos = curchan->hw_value;
+ int old_pos = -1;
+ unsigned long flags;
+
+ if (ah->curchan)
+ old_pos = ah->curchan - &ah->channels[0];
aphy->chan_idx = pos;
aphy->chan_is_ht = conf_is_ht(conf);
ath_update_chainmask(sc, conf_is_ht(conf));
+ /* update survey stats for the old channel before switching */
+ spin_lock_irqsave(&common->cc_lock, flags);
+ ath_update_survey_stats(sc);
+ spin_unlock_irqrestore(&common->cc_lock, flags);
+
+ /*
+ * If the operating channel changes, change the survey in-use flags
+ * along with it.
+ * Reset the survey data for the new channel, unless we're switching
+ * back to the operating channel from an off-channel operation.
+ */
+ if (!(hw->conf.flags & IEEE80211_CONF_OFFCHANNEL) &&
+ sc->cur_survey != &sc->survey[pos]) {
+
+ if (sc->cur_survey)
+ sc->cur_survey->filled &= ~SURVEY_INFO_IN_USE;
+
+ sc->cur_survey = &sc->survey[pos];
+
+ memset(sc->cur_survey, 0, sizeof(struct survey_info));
+ sc->cur_survey->filled |= SURVEY_INFO_IN_USE;
+ } else if (!(sc->survey[pos].filled & SURVEY_INFO_IN_USE)) {
+ memset(&sc->survey[pos], 0, sizeof(struct survey_info));
+ }
+
if (ath_set_channel(sc, hw, &sc->sc_ah->channels[pos]) < 0) {
ath_print(common, ATH_DBG_FATAL,
"Unable to set channel\n");
mutex_unlock(&sc->mutex);
return -EINVAL;
}
+
+ /*
+ * The most recent snapshot of channel->noisefloor for the old
+ * channel is only available after the hardware reset. Copy it to
+ * the survey stats now.
+ */
+ if (old_pos >= 0)
+ ath_update_survey_nf(sc, old_pos);
}
skip_chan_change:
FIF_PSPOLL | \
FIF_OTHER_BSS | \
FIF_BCN_PRBRESP_PROMISC | \
+ FIF_PROBE_REQ | \
FIF_FCSFAIL)
/* FIXME: sc->sc_full_reset ? */
{
struct ath_wiphy *aphy = hw->priv;
struct ath_softc *sc = aphy->sc;
- struct ath_hw *ah = sc->sc_ah;
- struct ath_common *common = ath9k_hw_common(ah);
- struct ieee80211_conf *conf = &hw->conf;
+ struct ath_common *common = ath9k_hw_common(sc->sc_ah);
+ struct ieee80211_supported_band *sband;
+ struct ieee80211_channel *chan;
+ unsigned long flags;
+ int pos;
- if (idx != 0)
+ spin_lock_irqsave(&common->cc_lock, flags);
+ if (idx == 0)
+ ath_update_survey_stats(sc);
+
+ sband = hw->wiphy->bands[IEEE80211_BAND_2GHZ];
+ if (sband && idx >= sband->n_channels) {
+ idx -= sband->n_channels;
+ sband = NULL;
+ }
+
+ if (!sband)
+ sband = hw->wiphy->bands[IEEE80211_BAND_5GHZ];
+
+ if (!sband || idx >= sband->n_channels) {
+ spin_unlock_irqrestore(&common->cc_lock, flags);
return -ENOENT;
+ }
- survey->channel = conf->channel;
- survey->filled = SURVEY_INFO_NOISE_DBM;
- survey->noise = common->ani.noise_floor;
+ chan = &sband->channels[idx];
+ pos = chan->hw_value;
+ memcpy(survey, &sc->survey[pos], sizeof(*survey));
+ survey->channel = chan;
+ spin_unlock_irqrestore(&common->cc_lock, flags);
return 0;
}