#define b43_g_ratetable (__b43_ratetable + 0)
#define b43_g_ratetable_size 12
-#define CHAN4G(_channel, _freq, _flags) { \
+#define CHAN2G(_channel, _freq, _flags) { \
.band = IEEE80211_BAND_2GHZ, \
.center_freq = (_freq), \
.hw_value = (_channel), \
.max_power = 30, \
}
static struct ieee80211_channel b43_2ghz_chantable[] = {
- CHAN4G(1, 2412, 0),
- CHAN4G(2, 2417, 0),
- CHAN4G(3, 2422, 0),
- CHAN4G(4, 2427, 0),
- CHAN4G(5, 2432, 0),
- CHAN4G(6, 2437, 0),
- CHAN4G(7, 2442, 0),
- CHAN4G(8, 2447, 0),
- CHAN4G(9, 2452, 0),
- CHAN4G(10, 2457, 0),
- CHAN4G(11, 2462, 0),
- CHAN4G(12, 2467, 0),
- CHAN4G(13, 2472, 0),
- CHAN4G(14, 2484, 0),
+ CHAN2G(1, 2412, 0),
+ CHAN2G(2, 2417, 0),
+ CHAN2G(3, 2422, 0),
+ CHAN2G(4, 2427, 0),
+ CHAN2G(5, 2432, 0),
+ CHAN2G(6, 2437, 0),
+ CHAN2G(7, 2442, 0),
+ CHAN2G(8, 2447, 0),
+ CHAN2G(9, 2452, 0),
+ CHAN2G(10, 2457, 0),
+ CHAN2G(11, 2462, 0),
+ CHAN2G(12, 2467, 0),
+ CHAN2G(13, 2472, 0),
+ CHAN2G(14, 2484, 0),
};
-#undef CHAN4G
+#undef CHAN2G
+#define CHAN4G(_channel, _flags) { \
+ .band = IEEE80211_BAND_5GHZ, \
+ .center_freq = 4000 + (5 * (_channel)), \
+ .hw_value = (_channel), \
+ .flags = (_flags), \
+ .max_antenna_gain = 0, \
+ .max_power = 30, \
+}
#define CHAN5G(_channel, _flags) { \
.band = IEEE80211_BAND_5GHZ, \
.center_freq = 5000 + (5 * (_channel)), \
.max_power = 30, \
}
static struct ieee80211_channel b43_5ghz_nphy_chantable[] = {
+ CHAN4G(184, 0), CHAN4G(186, 0),
+ CHAN4G(188, 0), CHAN4G(190, 0),
+ CHAN4G(192, 0), CHAN4G(194, 0),
+ CHAN4G(196, 0), CHAN4G(198, 0),
+ CHAN4G(200, 0), CHAN4G(202, 0),
+ CHAN4G(204, 0), CHAN4G(206, 0),
+ CHAN4G(208, 0), CHAN4G(210, 0),
+ CHAN4G(212, 0), CHAN4G(214, 0),
+ CHAN4G(216, 0), CHAN4G(218, 0),
+ CHAN4G(220, 0), CHAN4G(222, 0),
+ CHAN4G(224, 0), CHAN4G(226, 0),
+ CHAN4G(228, 0),
CHAN5G(32, 0), CHAN5G(34, 0),
CHAN5G(36, 0), CHAN5G(38, 0),
CHAN5G(40, 0), CHAN5G(42, 0),
CHAN5G(170, 0), CHAN5G(172, 0),
CHAN5G(174, 0), CHAN5G(176, 0),
CHAN5G(178, 0), CHAN5G(180, 0),
- CHAN5G(182, 0), CHAN5G(184, 0),
- CHAN5G(186, 0), CHAN5G(188, 0),
- CHAN5G(190, 0), CHAN5G(192, 0),
- CHAN5G(194, 0), CHAN5G(196, 0),
- CHAN5G(198, 0), CHAN5G(200, 0),
- CHAN5G(202, 0), CHAN5G(204, 0),
- CHAN5G(206, 0), CHAN5G(208, 0),
- CHAN5G(210, 0), CHAN5G(212, 0),
- CHAN5G(214, 0), CHAN5G(216, 0),
- CHAN5G(218, 0), CHAN5G(220, 0),
- CHAN5G(222, 0), CHAN5G(224, 0),
- CHAN5G(226, 0), CHAN5G(228, 0),
+ CHAN5G(182, 0),
};
static struct ieee80211_channel b43_5ghz_aphy_chantable[] = {
CHAN5G(208, 0), CHAN5G(212, 0),
CHAN5G(216, 0),
};
+#undef CHAN4G
#undef CHAN5G
static struct ieee80211_supported_band b43_band_5GHz_nphy = {
bcma_awrite32(dev->dev->bdev, BCMA_IOCTL, flags);
udelay(2);
- /* Take PHY out of reset */
- flags = bcma_aread32(dev->dev->bdev, BCMA_IOCTL);
- flags &= ~B43_BCMA_IOCTL_PHY_RESET;
- flags |= BCMA_IOCTL_FGC;
- bcma_awrite32(dev->dev->bdev, BCMA_IOCTL, flags);
- udelay(1);
-
- /* Do not force clock anymore */
- flags = bcma_aread32(dev->dev->bdev, BCMA_IOCTL);
- flags &= ~BCMA_IOCTL_FGC;
- bcma_awrite32(dev->dev->bdev, BCMA_IOCTL, flags);
- udelay(1);
+ b43_phy_take_out_of_reset(dev);
}
static void b43_bcma_wireless_core_reset(struct b43_wldev *dev, bool gmode)
B43_BCMA_CLKCTLST_PHY_PLL_REQ;
u32 status = B43_BCMA_CLKCTLST_80211_PLL_ST |
B43_BCMA_CLKCTLST_PHY_PLL_ST;
+ u32 flags;
+
+ flags = B43_BCMA_IOCTL_PHY_CLKEN;
+ if (gmode)
+ flags |= B43_BCMA_IOCTL_GMODE;
+ b43_device_enable(dev, flags);
- b43_device_enable(dev, B43_BCMA_IOCTL_PHY_CLKEN);
bcma_core_set_clockmode(dev->dev->bdev, BCMA_CLKMODE_FAST);
b43_bcma_phy_reset(dev);
bcma_core_pll_ctl(dev->dev->bdev, req, status, true);
}
#endif
+#ifdef CONFIG_B43_SSB
static void b43_ssb_wireless_core_reset(struct b43_wldev *dev, bool gmode)
{
- struct ssb_device *sdev = dev->dev->sdev;
- u32 tmslow;
u32 flags = 0;
if (gmode)
b43_device_enable(dev, flags);
msleep(2); /* Wait for the PLL to turn on. */
- /* Now take the PHY out of Reset again */
- tmslow = ssb_read32(sdev, SSB_TMSLOW);
- tmslow |= SSB_TMSLOW_FGC;
- tmslow &= ~B43_TMSLOW_PHYRESET;
- ssb_write32(sdev, SSB_TMSLOW, tmslow);
- ssb_read32(sdev, SSB_TMSLOW); /* flush */
- msleep(1);
- tmslow &= ~SSB_TMSLOW_FGC;
- ssb_write32(sdev, SSB_TMSLOW, tmslow);
- ssb_read32(sdev, SSB_TMSLOW); /* flush */
- msleep(1);
+ b43_phy_take_out_of_reset(dev);
}
+#endif
void b43_wireless_core_reset(struct b43_wldev *dev, bool gmode)
{
struct b43_firmware *fw = &dev->fw;
const struct b43_iv *ivals;
size_t count;
- int err;
hdr = (const struct b43_fw_header *)(fw->initvals.data->data);
ivals = (const struct b43_iv *)(fw->initvals.data->data + hdr_len);
count = be32_to_cpu(hdr->size);
- err = b43_write_initvals(dev, ivals, count,
+ return b43_write_initvals(dev, ivals, count,
fw->initvals.data->size - hdr_len);
- if (err)
- goto out;
- if (fw->initvals_band.data) {
- hdr = (const struct b43_fw_header *)(fw->initvals_band.data->data);
- ivals = (const struct b43_iv *)(fw->initvals_band.data->data + hdr_len);
- count = be32_to_cpu(hdr->size);
- err = b43_write_initvals(dev, ivals, count,
- fw->initvals_band.data->size - hdr_len);
- if (err)
- goto out;
- }
-out:
+}
- return err;
+static int b43_upload_initvals_band(struct b43_wldev *dev)
+{
+ const size_t hdr_len = sizeof(struct b43_fw_header);
+ const struct b43_fw_header *hdr;
+ struct b43_firmware *fw = &dev->fw;
+ const struct b43_iv *ivals;
+ size_t count;
+
+ if (!fw->initvals_band.data)
+ return 0;
+
+ hdr = (const struct b43_fw_header *)(fw->initvals_band.data->data);
+ ivals = (const struct b43_iv *)(fw->initvals_band.data->data + hdr_len);
+ count = be32_to_cpu(hdr->size);
+ return b43_write_initvals(dev, ivals, count,
+ fw->initvals_band.data->size - hdr_len);
}
/* Initialize the GPIOs
* http://bcm-specs.sipsolutions.net/GPIO
*/
+
+#ifdef CONFIG_B43_SSB
static struct ssb_device *b43_ssb_gpio_dev(struct b43_wldev *dev)
{
struct ssb_bus *bus = dev->dev->sdev->bus;
return bus->chipco.dev;
#endif
}
+#endif
static int b43_gpio_init(struct b43_wldev *dev)
{
+#ifdef CONFIG_B43_SSB
struct ssb_device *gpiodev;
+#endif
u32 mask, set;
b43_maskset32(dev, B43_MMIO_MACCTL, ~B43_MACCTL_GPOUTSMSK, 0);
/* Turn off all GPIO stuff. Call this on module unload, for example. */
static void b43_gpio_cleanup(struct b43_wldev *dev)
{
+#ifdef CONFIG_B43_SSB
struct ssb_device *gpiodev;
+#endif
switch (dev->dev->bus_type) {
#ifdef CONFIG_B43_BCMA
if (err)
goto err_gpio_clean;
+ err = b43_upload_initvals_band(dev);
+ if (err)
+ goto err_gpio_clean;
+
/* Turn the Analog on and initialize the PHY. */
phy->ops->switch_analog(dev, 1);
err = b43_phy_init(dev);
mutex_unlock(&wl->mutex);
}
-static void b43_put_phy_into_reset(struct b43_wldev *dev)
-{
- u32 tmp;
-
- switch (dev->dev->bus_type) {
-#ifdef CONFIG_B43_BCMA
- case B43_BUS_BCMA:
- b43err(dev->wl,
- "Putting PHY into reset not supported on BCMA\n");
- break;
-#endif
-#ifdef CONFIG_B43_SSB
- case B43_BUS_SSB:
- tmp = ssb_read32(dev->dev->sdev, SSB_TMSLOW);
- tmp &= ~B43_TMSLOW_GMODE;
- tmp |= B43_TMSLOW_PHYRESET;
- tmp |= SSB_TMSLOW_FGC;
- ssb_write32(dev->dev->sdev, SSB_TMSLOW, tmp);
- msleep(1);
-
- tmp = ssb_read32(dev->dev->sdev, SSB_TMSLOW);
- tmp &= ~SSB_TMSLOW_FGC;
- tmp |= B43_TMSLOW_PHYRESET;
- ssb_write32(dev->dev->sdev, SSB_TMSLOW, tmp);
- msleep(1);
-
- break;
-#endif
- }
-}
-
static const char *band_to_string(enum ieee80211_band band)
{
switch (band) {
}
/* Expects wl->mutex locked */
-static int b43_switch_band(struct b43_wl *wl, struct ieee80211_channel *chan)
+static int b43_switch_band(struct b43_wldev *dev,
+ struct ieee80211_channel *chan)
{
- struct b43_wldev *up_dev = NULL;
- struct b43_wldev *down_dev;
- struct b43_wldev *d;
- int err;
- bool uninitialized_var(gmode);
- int prev_status;
+ struct b43_phy *phy = &dev->phy;
+ bool gmode;
+ u32 tmp;
- /* Find a device and PHY which supports the band. */
- list_for_each_entry(d, &wl->devlist, list) {
- switch (chan->band) {
- case IEEE80211_BAND_5GHZ:
- if (d->phy.supports_5ghz) {
- up_dev = d;
- gmode = false;
- }
- break;
- case IEEE80211_BAND_2GHZ:
- if (d->phy.supports_2ghz) {
- up_dev = d;
- gmode = true;
- }
- break;
- default:
- B43_WARN_ON(1);
- return -EINVAL;
- }
- if (up_dev)
- break;
+ switch (chan->band) {
+ case IEEE80211_BAND_5GHZ:
+ gmode = false;
+ break;
+ case IEEE80211_BAND_2GHZ:
+ gmode = true;
+ break;
+ default:
+ B43_WARN_ON(1);
+ return -EINVAL;
}
- if (!up_dev) {
- b43err(wl, "Could not find a device for %s-GHz band operation\n",
+
+ if (!((gmode && phy->supports_2ghz) ||
+ (!gmode && phy->supports_5ghz))) {
+ b43err(dev->wl, "This device doesn't support %s-GHz band\n",
band_to_string(chan->band));
return -ENODEV;
}
- if ((up_dev == wl->current_dev) &&
- (!!wl->current_dev->phy.gmode == !!gmode)) {
+
+ if (!!phy->gmode == !!gmode) {
/* This device is already running. */
return 0;
}
- b43dbg(wl, "Switching to %s-GHz band\n",
+
+ b43dbg(dev->wl, "Switching to %s GHz band\n",
band_to_string(chan->band));
- down_dev = wl->current_dev;
- prev_status = b43_status(down_dev);
- /* Shutdown the currently running core. */
- if (prev_status >= B43_STAT_STARTED)
- down_dev = b43_wireless_core_stop(down_dev);
- if (prev_status >= B43_STAT_INITIALIZED)
- b43_wireless_core_exit(down_dev);
+ /* Some new devices don't need disabling radio for band switching */
+ if (!(phy->type == B43_PHYTYPE_N && phy->rev >= 3))
+ b43_software_rfkill(dev, true);
- if (down_dev != up_dev) {
- /* We switch to a different core, so we put PHY into
- * RESET on the old core. */
- b43_put_phy_into_reset(down_dev);
+ phy->gmode = gmode;
+ b43_phy_put_into_reset(dev);
+ switch (dev->dev->bus_type) {
+#ifdef CONFIG_B43_BCMA
+ case B43_BUS_BCMA:
+ tmp = bcma_aread32(dev->dev->bdev, BCMA_IOCTL);
+ if (gmode)
+ tmp |= B43_BCMA_IOCTL_GMODE;
+ else
+ tmp &= ~B43_BCMA_IOCTL_GMODE;
+ bcma_awrite32(dev->dev->bdev, BCMA_IOCTL, tmp);
+ break;
+#endif
+#ifdef CONFIG_B43_SSB
+ case B43_BUS_SSB:
+ tmp = ssb_read32(dev->dev->sdev, SSB_TMSLOW);
+ if (gmode)
+ tmp |= B43_TMSLOW_GMODE;
+ else
+ tmp &= ~B43_TMSLOW_GMODE;
+ ssb_write32(dev->dev->sdev, SSB_TMSLOW, tmp);
+ break;
+#endif
}
+ b43_phy_take_out_of_reset(dev);
- /* Now start the new core. */
- up_dev->phy.gmode = gmode;
- if (prev_status >= B43_STAT_INITIALIZED) {
- err = b43_wireless_core_init(up_dev);
- if (err) {
- b43err(wl, "Fatal: Could not initialize device for "
- "selected %s-GHz band\n",
- band_to_string(chan->band));
- goto init_failure;
- }
- }
- if (prev_status >= B43_STAT_STARTED) {
- err = b43_wireless_core_start(up_dev);
- if (err) {
- b43err(wl, "Fatal: Could not start device for "
- "selected %s-GHz band\n",
- band_to_string(chan->band));
- b43_wireless_core_exit(up_dev);
- goto init_failure;
- }
- }
- B43_WARN_ON(b43_status(up_dev) != prev_status);
+ b43_upload_initvals_band(dev);
- wl->current_dev = up_dev;
+ b43_phy_init(dev);
return 0;
-init_failure:
- /* Whoops, failed to init the new core. No core is operating now. */
- wl->current_dev = NULL;
- return err;
}
/* Write the short and long frame retry limit values. */
dev = wl->current_dev;
+ b43_mac_suspend(dev);
+
/* Switch the band (if necessary). This might change the active core. */
- err = b43_switch_band(wl, conf->chandef.chan);
+ err = b43_switch_band(dev, conf->chandef.chan);
if (err)
goto out_unlock_mutex;
else
phy->is_40mhz = false;
- b43_mac_suspend(dev);
-
if (changed & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
b43_set_retry_limits(dev, conf->short_frame_max_tx_count,
conf->long_frame_max_tx_count);
struct ssb_bus *bus;
u32 tmp;
+#ifdef CONFIG_B43_SSB
if (dev->dev->bus_type != B43_BUS_SSB)
return;
+#else
+ return;
+#endif
bus = dev->dev->sdev->bus;
}
if (sprom->boardflags_lo & B43_BFL_XTAL_NOSLOW)
hf |= B43_HF_DSCRQ; /* Disable slowclock requests from ucode. */
-#ifdef CONFIG_SSB_DRIVER_PCICORE
+#if defined(CONFIG_B43_SSB) && defined(CONFIG_SSB_DRIVER_PCICORE)
if (dev->dev->bus_type == B43_BUS_SSB &&
dev->dev->sdev->bus->bustype == SSB_BUSTYPE_PCI &&
dev->dev->sdev->bus->pcicore.dev->id.revision <= 10)
b43_phy_free(dev);
}
+static void b43_supported_bands(struct b43_wldev *dev, bool *have_2ghz_phy,
+ bool *have_5ghz_phy)
+{
+ u16 dev_id = 0;
+
+#ifdef CONFIG_B43_BCMA
+ if (dev->dev->bus_type == B43_BUS_BCMA &&
+ dev->dev->bdev->bus->hosttype == BCMA_HOSTTYPE_PCI)
+ dev_id = dev->dev->bdev->bus->host_pci->device;
+#endif
+#ifdef CONFIG_B43_SSB
+ if (dev->dev->bus_type == B43_BUS_SSB &&
+ dev->dev->sdev->bus->bustype == SSB_BUSTYPE_PCI)
+ dev_id = dev->dev->sdev->bus->host_pci->device;
+#endif
+ /* Override with SPROM value if available */
+ if (dev->dev->bus_sprom->dev_id)
+ dev_id = dev->dev->bus_sprom->dev_id;
+
+ /* Note: below IDs can be "virtual" (not maching e.g. real PCI ID) */
+ switch (dev_id) {
+ case 0x4324: /* BCM4306 */
+ case 0x4312: /* BCM4311 */
+ case 0x4319: /* BCM4318 */
+ case 0x4328: /* BCM4321 */
+ case 0x432b: /* BCM4322 */
+ case 0x4350: /* BCM43222 */
+ case 0x4353: /* BCM43224 */
+ case 0x0576: /* BCM43224 */
+ case 0x435f: /* BCM6362 */
+ case 0x4331: /* BCM4331 */
+ case 0x4359: /* BCM43228 */
+ case 0x43a0: /* BCM4360 */
+ case 0x43b1: /* BCM4352 */
+ /* Dual band devices */
+ *have_2ghz_phy = true;
+ *have_5ghz_phy = true;
+ return;
+ case 0x4321: /* BCM4306 */
+ case 0x4313: /* BCM4311 */
+ case 0x431a: /* BCM4318 */
+ case 0x432a: /* BCM4321 */
+ case 0x432d: /* BCM4322 */
+ case 0x4352: /* BCM43222 */
+ case 0x4333: /* BCM4331 */
+ case 0x43a2: /* BCM4360 */
+ case 0x43b3: /* BCM4352 */
+ /* 5 GHz only devices */
+ *have_2ghz_phy = false;
+ *have_5ghz_phy = true;
+ return;
+ }
+
+ /* As a fallback, try to guess using PHY type */
+ switch (dev->phy.type) {
+ case B43_PHYTYPE_A:
+ *have_2ghz_phy = false;
+ *have_5ghz_phy = true;
+ return;
+ case B43_PHYTYPE_G:
+ case B43_PHYTYPE_N:
+ case B43_PHYTYPE_LP:
+ case B43_PHYTYPE_HT:
+ case B43_PHYTYPE_LCN:
+ *have_2ghz_phy = true;
+ *have_5ghz_phy = false;
+ return;
+ }
+
+ B43_WARN_ON(1);
+}
+
static int b43_wireless_core_attach(struct b43_wldev *dev)
{
struct b43_wl *wl = dev->wl;
- struct pci_dev *pdev = NULL;
+ struct b43_phy *phy = &dev->phy;
int err;
u32 tmp;
bool have_2ghz_phy = false, have_5ghz_phy = false;
* that in core_init(), too.
*/
-#ifdef CONFIG_B43_SSB
- if (dev->dev->bus_type == B43_BUS_SSB &&
- dev->dev->sdev->bus->bustype == SSB_BUSTYPE_PCI)
- pdev = dev->dev->sdev->bus->host_pci;
-#endif
-
err = b43_bus_powerup(dev, 0);
if (err) {
b43err(wl, "Bus powerup failed\n");
goto out;
}
- /* Get the PHY type. */
+ phy->do_full_init = true;
+
+ /* Try to guess supported bands for the first init needs */
switch (dev->dev->bus_type) {
#ifdef CONFIG_B43_BCMA
case B43_BUS_BCMA:
}
dev->phy.gmode = have_2ghz_phy;
- dev->phy.radio_on = true;
b43_wireless_core_reset(dev, dev->phy.gmode);
+ /* Get the PHY type. */
err = b43_phy_versioning(dev);
if (err)
goto err_powerdown;
- /* Check if this device supports multiband. */
- if (!pdev ||
- (pdev->device != 0x4312 &&
- pdev->device != 0x4319 && pdev->device != 0x4324)) {
- /* No multiband support. */
- have_2ghz_phy = false;
+
+ /* Get real info about supported bands */
+ b43_supported_bands(dev, &have_2ghz_phy, &have_5ghz_phy);
+
+ /* We don't support 5 GHz on some PHYs yet */
+ switch (dev->phy.type) {
+ case B43_PHYTYPE_A:
+ case B43_PHYTYPE_G:
+ case B43_PHYTYPE_N:
+ case B43_PHYTYPE_LP:
+ case B43_PHYTYPE_HT:
+ b43warn(wl, "5 GHz band is unsupported on this PHY\n");
have_5ghz_phy = false;
- switch (dev->phy.type) {
- case B43_PHYTYPE_A:
- have_5ghz_phy = true;
- break;
- case B43_PHYTYPE_LP: //FIXME not always!
-#if 0 //FIXME enabling 5GHz causes a NULL pointer dereference
- have_5ghz_phy = 1;
-#endif
- case B43_PHYTYPE_G:
- case B43_PHYTYPE_N:
- case B43_PHYTYPE_HT:
- case B43_PHYTYPE_LCN:
- have_2ghz_phy = true;
- break;
- default:
- B43_WARN_ON(1);
- }
}
- if (dev->phy.type == B43_PHYTYPE_A) {
- /* FIXME */
- b43err(wl, "IEEE 802.11a devices are unsupported\n");
+
+ if (!have_2ghz_phy && !have_5ghz_phy) {
+ b43err(wl, "b43 can't support any band on this device\n");
err = -EOPNOTSUPP;
goto err_powerdown;
}
- if (1 /* disable A-PHY */) {
- /* FIXME: For now we disable the A-PHY on multi-PHY devices. */
- if (dev->phy.type != B43_PHYTYPE_N &&
- dev->phy.type != B43_PHYTYPE_LP) {
- have_2ghz_phy = true;
- have_5ghz_phy = false;
- }
- }
err = b43_phy_allocate(dev);
if (err)
b43_debugfs_remove_device(wldev);
b43_wireless_core_detach(wldev);
list_del(&wldev->list);
- wl->nr_devs--;
b43_bus_set_wldev(dev, NULL);
kfree(wldev);
}
if (err)
goto err_kfree_wldev;
- list_add(&wldev->list, &wl->devlist);
- wl->nr_devs++;
b43_bus_set_wldev(dev, wldev);
b43_debugfs_add_device(wldev);
(pdev->subsystem_vendor == PCI_VENDOR_ID_##_subvendor) && \
(pdev->subsystem_device == _subdevice) )
+#ifdef CONFIG_B43_SSB
static void b43_sprom_fixup(struct ssb_bus *bus)
{
struct pci_dev *pdev;
ssb_set_devtypedata(dev->sdev, NULL);
ieee80211_free_hw(hw);
}
+#endif
static struct b43_wl *b43_wireless_init(struct b43_bus_dev *dev)
{
wl->hw = hw;
mutex_init(&wl->mutex);
spin_lock_init(&wl->hardirq_lock);
- INIT_LIST_HEAD(&wl->devlist);
INIT_WORK(&wl->beacon_update_trigger, b43_beacon_update_trigger_work);
INIT_WORK(&wl->txpower_adjust_work, b43_phy_txpower_adjust_work);
INIT_WORK(&wl->tx_work, b43_tx_work);
struct b43_bus_dev *dev;
struct b43_wl *wl;
int err;
- int first = 0;
dev = b43_bus_dev_ssb_init(sdev);
if (!dev)
return -ENOMEM;
wl = ssb_get_devtypedata(sdev);
- if (!wl) {
- /* Probing the first core. Must setup common struct b43_wl */
- first = 1;
- b43_sprom_fixup(sdev->bus);
- wl = b43_wireless_init(dev);
- if (IS_ERR(wl)) {
- err = PTR_ERR(wl);
- goto out;
- }
- ssb_set_devtypedata(sdev, wl);
- B43_WARN_ON(ssb_get_devtypedata(sdev) != wl);
+ if (wl) {
+ b43err(NULL, "Dual-core devices are not supported\n");
+ err = -ENOTSUPP;
+ goto err_ssb_kfree_dev;
+ }
+
+ b43_sprom_fixup(sdev->bus);
+
+ wl = b43_wireless_init(dev);
+ if (IS_ERR(wl)) {
+ err = PTR_ERR(wl);
+ goto err_ssb_kfree_dev;
}
+ ssb_set_devtypedata(sdev, wl);
+ B43_WARN_ON(ssb_get_devtypedata(sdev) != wl);
+
err = b43_one_core_attach(dev, wl);
if (err)
- goto err_wireless_exit;
+ goto err_ssb_wireless_exit;
/* setup and start work to load firmware */
INIT_WORK(&wl->firmware_load, b43_request_firmware);
schedule_work(&wl->firmware_load);
- out:
return err;
- err_wireless_exit:
- if (first)
- b43_wireless_exit(dev, wl);
+err_ssb_wireless_exit:
+ b43_wireless_exit(dev, wl);
+err_ssb_kfree_dev:
+ kfree(dev);
return err;
}
/* Unregister HW RNG driver */
b43_rng_exit(wl);
- if (list_empty(&wl->devlist)) {
- b43_leds_unregister(wl);
- /* Last core on the chip unregistered.
- * We can destroy common struct b43_wl.
- */
- b43_wireless_exit(dev, wl);
- }
+ b43_leds_unregister(wl);
+ b43_wireless_exit(dev, wl);
}
static struct ssb_driver b43_ssb_driver = {
projects / karo-tx-linux.git / blobdiff