/* Highest firmware API version supported */
#define IWL6000_UCODE_API_MAX 4
#define IWL6050_UCODE_API_MAX 4
-#define IWL6000G2_UCODE_API_MAX 4
+#define IWL6000G2_UCODE_API_MAX 5
/* Lowest firmware API version supported */
#define IWL6000_UCODE_API_MIN 4
#define _IWL6000G2A_MODULE_FIRMWARE(api) IWL6000G2A_FW_PRE #api ".ucode"
#define IWL6000G2A_MODULE_FIRMWARE(api) _IWL6000G2A_MODULE_FIRMWARE(api)
+#define IWL6000G2B_FW_PRE "iwlwifi-6000g2b-"
+#define _IWL6000G2B_MODULE_FIRMWARE(api) IWL6000G2B_FW_PRE #api ".ucode"
+#define IWL6000G2B_MODULE_FIRMWARE(api) _IWL6000G2B_MODULE_FIRMWARE(api)
+
static void iwl6000_set_ct_threshold(struct iwl_priv *priv)
{
priv->hw_params.ct_kill_exit_threshold = CT_KILL_EXIT_THRESHOLD;
}
-/* Indicate calibration version to uCode. */
-static void iwl6050_set_calib_version(struct iwl_priv *priv)
+static void iwl6050_additional_nic_config(struct iwl_priv *priv)
{
+ /* Indicate calibration version to uCode. */
if (priv->cfg->ops->lib->eeprom_ops.calib_version(priv) >= 6)
iwl_set_bit(priv, CSR_GP_DRIVER_REG,
CSR_GP_DRIVER_REG_BIT_CALIB_VERSION6);
}
+static void iwl6050g2_additional_nic_config(struct iwl_priv *priv)
+{
+ /* Indicate calibration version to uCode. */
+ if (priv->cfg->ops->lib->eeprom_ops.calib_version(priv) >= 6)
+ iwl_set_bit(priv, CSR_GP_DRIVER_REG,
+ CSR_GP_DRIVER_REG_BIT_CALIB_VERSION6);
+ iwl_set_bit(priv, CSR_GP_DRIVER_REG,
+ CSR_GP_DRIVER_REG_BIT_6050_1x2);
+}
+
/* NIC configuration for 6000 series */
static void iwl6000_nic_config(struct iwl_priv *priv)
{
iwl_write32(priv, CSR_GP_DRIVER_REG,
CSR_GP_DRIVER_REG_BIT_RADIO_SKU_2x2_IPA);
}
- /* else do nothing, uCode configured */
- if (priv->cfg->ops->lib->temp_ops.set_calib_version)
- priv->cfg->ops->lib->temp_ops.set_calib_version(priv);
+ /* do additional nic configuration if needed */
+ if (priv->cfg->ops->nic &&
+ priv->cfg->ops->nic->additional_nic_config) {
+ priv->cfg->ops->nic->additional_nic_config(priv);
+ }
}
static struct iwl_sensitivity_ranges iwl6000_sensitivity = {
priv->cfg->num_of_queues *
sizeof(struct iwlagn_scd_bc_tbl);
priv->hw_params.tfd_size = sizeof(struct iwl_tfd);
- priv->hw_params.max_stations = IWL5000_STATION_COUNT;
- priv->hw_params.bcast_sta_id = IWL5000_BROADCAST_ID;
+ priv->hw_params.max_stations = IWLAGN_STATION_COUNT;
+ priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id = IWLAGN_BROADCAST_ID;
priv->hw_params.max_data_size = IWL60_RTC_DATA_SIZE;
priv->hw_params.max_inst_size = IWL60_RTC_INST_SIZE;
BIT(IWL_CALIB_LO) |
BIT(IWL_CALIB_TX_IQ) |
BIT(IWL_CALIB_BASE_BAND);
+ if (priv->cfg->need_dc_calib)
+ priv->hw_params.calib_init_cfg |= BIT(IWL_CALIB_DC);
- return 0;
-}
-
-static int iwl6050_hw_set_hw_params(struct iwl_priv *priv)
-{
- if (priv->cfg->mod_params->num_of_queues >= IWL_MIN_NUM_QUEUES &&
- priv->cfg->mod_params->num_of_queues <= IWLAGN_NUM_QUEUES)
- priv->cfg->num_of_queues =
- priv->cfg->mod_params->num_of_queues;
-
- priv->hw_params.max_txq_num = priv->cfg->num_of_queues;
- priv->hw_params.dma_chnl_num = FH50_TCSR_CHNL_NUM;
- priv->hw_params.scd_bc_tbls_size =
- priv->cfg->num_of_queues *
- sizeof(struct iwlagn_scd_bc_tbl);
- priv->hw_params.tfd_size = sizeof(struct iwl_tfd);
- priv->hw_params.max_stations = IWL5000_STATION_COUNT;
- priv->hw_params.bcast_sta_id = IWL5000_BROADCAST_ID;
-
- priv->hw_params.max_data_size = IWL60_RTC_DATA_SIZE;
- priv->hw_params.max_inst_size = IWL60_RTC_INST_SIZE;
-
- priv->hw_params.max_bsm_size = 0;
- priv->hw_params.ht40_channel = BIT(IEEE80211_BAND_2GHZ) |
- BIT(IEEE80211_BAND_5GHZ);
- priv->hw_params.rx_wrt_ptr_reg = FH_RSCSR_CHNL0_WPTR;
-
- priv->hw_params.tx_chains_num = num_of_ant(priv->cfg->valid_tx_ant);
- priv->hw_params.rx_chains_num = num_of_ant(priv->cfg->valid_rx_ant);
- priv->hw_params.valid_tx_ant = priv->cfg->valid_tx_ant;
- priv->hw_params.valid_rx_ant = priv->cfg->valid_rx_ant;
-
- if (priv->cfg->ops->lib->temp_ops.set_ct_kill)
- priv->cfg->ops->lib->temp_ops.set_ct_kill(priv);
-
- /* Set initial sensitivity parameters */
- /* Set initial calibration set */
- priv->hw_params.sens = &iwl6000_sensitivity;
- priv->hw_params.calib_init_cfg =
- BIT(IWL_CALIB_XTAL) |
- BIT(IWL_CALIB_DC) |
- BIT(IWL_CALIB_LO) |
- BIT(IWL_CALIB_TX_IQ) |
- BIT(IWL_CALIB_BASE_BAND);
+ priv->hw_params.beacon_time_tsf_bits = IWLAGN_EXT_BEACON_TIME_POS;
return 0;
}
-static int iwl6000_hw_channel_switch(struct iwl_priv *priv, u16 channel)
+static int iwl6000_hw_channel_switch(struct iwl_priv *priv,
+ struct ieee80211_channel_switch *ch_switch)
{
+ /*
+ * MULTI-FIXME
+ * See iwl_mac_channel_switch.
+ */
+ struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
struct iwl6000_channel_switch_cmd cmd;
const struct iwl_channel_info *ch_info;
+ u32 switch_time_in_usec, ucode_switch_time;
+ u16 ch;
+ u32 tsf_low;
+ u8 switch_count;
+ u16 beacon_interval = le16_to_cpu(ctx->timing.beacon_interval);
+ struct ieee80211_vif *vif = ctx->vif;
struct iwl_host_cmd hcmd = {
.id = REPLY_CHANNEL_SWITCH,
.len = sizeof(cmd),
- .flags = CMD_SIZE_HUGE,
+ .flags = CMD_SYNC,
.data = &cmd,
};
- IWL_DEBUG_11H(priv, "channel switch from %d to %d\n",
- priv->active_rxon.channel, channel);
-
cmd.band = priv->band == IEEE80211_BAND_2GHZ;
- cmd.channel = cpu_to_le16(channel);
- cmd.rxon_flags = priv->staging_rxon.flags;
- cmd.rxon_filter_flags = priv->staging_rxon.filter_flags;
- cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time);
- ch_info = iwl_get_channel_info(priv, priv->band, channel);
+ ch = ch_switch->channel->hw_value;
+ IWL_DEBUG_11H(priv, "channel switch from %u to %u\n",
+ ctx->active.channel, ch);
+ cmd.channel = cpu_to_le16(ch);
+ cmd.rxon_flags = ctx->staging.flags;
+ cmd.rxon_filter_flags = ctx->staging.filter_flags;
+ switch_count = ch_switch->count;
+ tsf_low = ch_switch->timestamp & 0x0ffffffff;
+ /*
+ * calculate the ucode channel switch time
+ * adding TSF as one of the factor for when to switch
+ */
+ if ((priv->ucode_beacon_time > tsf_low) && beacon_interval) {
+ if (switch_count > ((priv->ucode_beacon_time - tsf_low) /
+ beacon_interval)) {
+ switch_count -= (priv->ucode_beacon_time -
+ tsf_low) / beacon_interval;
+ } else
+ switch_count = 0;
+ }
+ if (switch_count <= 1)
+ cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time);
+ else {
+ switch_time_in_usec =
+ vif->bss_conf.beacon_int * switch_count * TIME_UNIT;
+ ucode_switch_time = iwl_usecs_to_beacons(priv,
+ switch_time_in_usec,
+ beacon_interval);
+ cmd.switch_time = iwl_add_beacon_time(priv,
+ priv->ucode_beacon_time,
+ ucode_switch_time,
+ beacon_interval);
+ }
+ IWL_DEBUG_11H(priv, "uCode time for the switch is 0x%x\n",
+ cmd.switch_time);
+ ch_info = iwl_get_channel_info(priv, priv->band, ch);
if (ch_info)
cmd.expect_beacon = is_channel_radar(ch_info);
else {
IWL_ERR(priv, "invalid channel switch from %u to %u\n",
- priv->active_rxon.channel, channel);
+ ctx->active.channel, ch);
return -EFAULT;
}
- priv->switch_rxon.channel = cpu_to_le16(channel);
+ priv->switch_rxon.channel = cmd.channel;
priv->switch_rxon.switch_in_progress = true;
return iwl_send_cmd_sync(priv, &hcmd);
.set_ct_kill = iwl6000_set_ct_threshold,
},
.manage_ibss_station = iwlagn_manage_ibss_station,
+ .update_bcast_stations = iwl_update_bcast_stations,
.debugfs_ops = {
.rx_stats_read = iwl_ucode_rx_stats_read,
.tx_stats_read = iwl_ucode_tx_stats_read,
.general_stats_read = iwl_ucode_general_stats_read,
+ .bt_stats_read = iwl_ucode_bt_stats_read,
+ .reply_tx_error = iwl_reply_tx_error_read,
},
.recover_from_tx_stall = iwl_bg_monitor_recover,
.check_plcp_health = iwl_good_plcp_health,
.check_ack_health = iwl_good_ack_health,
+ .txfifo_flush = iwlagn_txfifo_flush,
+ .dev_txfifo_flush = iwlagn_dev_txfifo_flush,
+ .tt_ops = {
+ .lower_power_detection = iwl_tt_is_low_power_state,
+ .tt_power_mode = iwl_tt_current_power_mode,
+ .ct_kill_check = iwl_check_for_ct_kill,
+ }
};
-static const struct iwl_ops iwl6000_ops = {
- .lib = &iwl6000_lib,
- .hcmd = &iwlagn_hcmd,
- .utils = &iwlagn_hcmd_utils,
- .led = &iwlagn_led_ops,
-};
-
-static struct iwl_lib_ops iwl6050_lib = {
- .set_hw_params = iwl6050_hw_set_hw_params,
+static struct iwl_lib_ops iwl6000g2b_lib = {
+ .set_hw_params = iwl6000_hw_set_hw_params,
.txq_update_byte_cnt_tbl = iwlagn_txq_update_byte_cnt_tbl,
.txq_inval_byte_cnt_tbl = iwlagn_txq_inval_byte_cnt_tbl,
.txq_set_sched = iwlagn_txq_set_sched,
.txq_attach_buf_to_tfd = iwl_hw_txq_attach_buf_to_tfd,
.txq_free_tfd = iwl_hw_txq_free_tfd,
.txq_init = iwl_hw_tx_queue_init,
- .rx_handler_setup = iwlagn_rx_handler_setup,
- .setup_deferred_work = iwlagn_setup_deferred_work,
+ .rx_handler_setup = iwlagn_bt_rx_handler_setup,
+ .setup_deferred_work = iwlagn_bt_setup_deferred_work,
+ .cancel_deferred_work = iwlagn_bt_cancel_deferred_work,
.is_valid_rtc_data_addr = iwlagn_hw_valid_rtc_data_addr,
.load_ucode = iwlagn_load_ucode,
.dump_nic_event_log = iwl_dump_nic_event_log,
.temp_ops = {
.temperature = iwlagn_temperature,
.set_ct_kill = iwl6000_set_ct_threshold,
- .set_calib_version = iwl6050_set_calib_version,
},
.manage_ibss_station = iwlagn_manage_ibss_station,
+ .update_bcast_stations = iwl_update_bcast_stations,
.debugfs_ops = {
.rx_stats_read = iwl_ucode_rx_stats_read,
.tx_stats_read = iwl_ucode_tx_stats_read,
.general_stats_read = iwl_ucode_general_stats_read,
+ .bt_stats_read = iwl_ucode_bt_stats_read,
+ .reply_tx_error = iwl_reply_tx_error_read,
},
.recover_from_tx_stall = iwl_bg_monitor_recover,
.check_plcp_health = iwl_good_plcp_health,
.check_ack_health = iwl_good_ack_health,
+ .txfifo_flush = iwlagn_txfifo_flush,
+ .dev_txfifo_flush = iwlagn_dev_txfifo_flush,
+ .tt_ops = {
+ .lower_power_detection = iwl_tt_is_low_power_state,
+ .tt_power_mode = iwl_tt_current_power_mode,
+ .ct_kill_check = iwl_check_for_ct_kill,
+ }
+};
+
+static struct iwl_nic_ops iwl6050_nic_ops = {
+ .additional_nic_config = &iwl6050_additional_nic_config,
+};
+
+static struct iwl_nic_ops iwl6050g2_nic_ops = {
+ .additional_nic_config = &iwl6050g2_additional_nic_config,
+};
+
+static const struct iwl_ops iwl6000_ops = {
+ .lib = &iwl6000_lib,
+ .hcmd = &iwlagn_hcmd,
+ .utils = &iwlagn_hcmd_utils,
+ .led = &iwlagn_led_ops,
};
static const struct iwl_ops iwl6050_ops = {
- .lib = &iwl6050_lib,
+ .lib = &iwl6000_lib,
.hcmd = &iwlagn_hcmd,
.utils = &iwlagn_hcmd_utils,
.led = &iwlagn_led_ops,
+ .nic = &iwl6050_nic_ops,
};
+static const struct iwl_ops iwl6050g2_ops = {
+ .lib = &iwl6000_lib,
+ .hcmd = &iwlagn_hcmd,
+ .utils = &iwlagn_hcmd_utils,
+ .led = &iwlagn_led_ops,
+ .nic = &iwl6050g2_nic_ops,
+};
+
+static const struct iwl_ops iwl6000g2b_ops = {
+ .lib = &iwl6000g2b_lib,
+ .hcmd = &iwlagn_bt_hcmd,
+ .utils = &iwlagn_hcmd_utils,
+ .led = &iwlagn_led_ops,
+};
struct iwl_cfg iwl6000g2a_2agn_cfg = {
.name = "6000 Series 2x2 AGN Gen2a",
.shadow_ram_support = true,
.ht_greenfield_support = true,
.led_compensation = 51,
- .use_rts_for_ht = true, /* use rts/cts protection */
+ .use_rts_for_aggregation = true, /* use rts/cts protection */
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.supports_idle = true,
.adv_thermal_throttle = true,
.support_ct_kill_exit = true,
.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
.chain_noise_scale = 1000,
- .monitor_recover_period = IWL_MONITORING_PERIOD,
+ .monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
.max_event_log_size = 512,
.ucode_tracing = true,
.sensitivity_calib_by_driver = true,
.chain_noise_calib_by_driver = true,
+ .need_dc_calib = true,
+};
+
+struct iwl_cfg iwl6000g2a_2abg_cfg = {
+ .name = "6000 Series 2x2 ABG Gen2a",
+ .fw_name_pre = IWL6000G2A_FW_PRE,
+ .ucode_api_max = IWL6000G2_UCODE_API_MAX,
+ .ucode_api_min = IWL6000G2_UCODE_API_MIN,
+ .sku = IWL_SKU_A|IWL_SKU_G,
+ .ops = &iwl6000_ops,
+ .eeprom_size = OTP_LOW_IMAGE_SIZE,
+ .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
+ .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
+ .num_of_queues = IWLAGN_NUM_QUEUES,
+ .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
+ .mod_params = &iwlagn_mod_params,
+ .valid_tx_ant = ANT_AB,
+ .valid_rx_ant = ANT_AB,
+ .pll_cfg_val = 0,
+ .set_l0s = true,
+ .use_bsm = false,
+ .pa_type = IWL_PA_SYSTEM,
+ .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
+ .shadow_ram_support = true,
+ .led_compensation = 51,
+ .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
+ .supports_idle = true,
+ .adv_thermal_throttle = true,
+ .support_ct_kill_exit = true,
+ .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
+ .chain_noise_scale = 1000,
+ .monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
+ .max_event_log_size = 512,
+ .sensitivity_calib_by_driver = true,
+ .chain_noise_calib_by_driver = true,
+ .need_dc_calib = true,
+};
+
+struct iwl_cfg iwl6000g2a_2bg_cfg = {
+ .name = "6000 Series 2x2 BG Gen2a",
+ .fw_name_pre = IWL6000G2A_FW_PRE,
+ .ucode_api_max = IWL6000G2_UCODE_API_MAX,
+ .ucode_api_min = IWL6000G2_UCODE_API_MIN,
+ .sku = IWL_SKU_G,
+ .ops = &iwl6000_ops,
+ .eeprom_size = OTP_LOW_IMAGE_SIZE,
+ .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
+ .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
+ .num_of_queues = IWLAGN_NUM_QUEUES,
+ .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
+ .mod_params = &iwlagn_mod_params,
+ .valid_tx_ant = ANT_AB,
+ .valid_rx_ant = ANT_AB,
+ .pll_cfg_val = 0,
+ .set_l0s = true,
+ .use_bsm = false,
+ .pa_type = IWL_PA_SYSTEM,
+ .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
+ .shadow_ram_support = true,
+ .led_compensation = 51,
+ .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
+ .supports_idle = true,
+ .adv_thermal_throttle = true,
+ .support_ct_kill_exit = true,
+ .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
+ .chain_noise_scale = 1000,
+ .monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
+ .max_event_log_size = 512,
+ .sensitivity_calib_by_driver = true,
+ .chain_noise_calib_by_driver = true,
+ .need_dc_calib = true,
+};
+
+struct iwl_cfg iwl6000g2b_2agn_cfg = {
+ .name = "6000 Series 2x2 AGN Gen2b",
+ .fw_name_pre = IWL6000G2B_FW_PRE,
+ .ucode_api_max = IWL6000G2_UCODE_API_MAX,
+ .ucode_api_min = IWL6000G2_UCODE_API_MIN,
+ .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
+ .ops = &iwl6000g2b_ops,
+ .eeprom_size = OTP_LOW_IMAGE_SIZE,
+ .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
+ .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
+ .num_of_queues = IWLAGN_NUM_QUEUES,
+ .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
+ .mod_params = &iwlagn_mod_params,
+ .valid_tx_ant = ANT_AB,
+ .valid_rx_ant = ANT_AB,
+ .pll_cfg_val = 0,
+ .set_l0s = true,
+ .use_bsm = false,
+ .pa_type = IWL_PA_SYSTEM,
+ .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
+ .shadow_ram_support = true,
+ .ht_greenfield_support = true,
+ .led_compensation = 51,
+ .use_rts_for_aggregation = true, /* use rts/cts protection */
+ .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
+ .supports_idle = true,
+ .adv_thermal_throttle = true,
+ .support_ct_kill_exit = true,
+ .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE,
+ .chain_noise_scale = 1000,
+ .monitor_recover_period = IWL_LONG_MONITORING_PERIOD,
+ .max_event_log_size = 512,
+ .sensitivity_calib_by_driver = true,
+ .chain_noise_calib_by_driver = true,
+ .need_dc_calib = true,
+ .bt_statistics = true,
+ /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
+ .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
+ .advanced_bt_coexist = true,
+ .bt_init_traffic_load = IWL_BT_COEX_TRAFFIC_LOAD_NONE,
+ .bt_prio_boost = IWLAGN_BT_PRIO_BOOST_DEFAULT,
+};
+
+struct iwl_cfg iwl6000g2b_2abg_cfg = {
+ .name = "6000 Series 2x2 ABG Gen2b",
+ .fw_name_pre = IWL6000G2B_FW_PRE,
+ .ucode_api_max = IWL6000G2_UCODE_API_MAX,
+ .ucode_api_min = IWL6000G2_UCODE_API_MIN,
+ .sku = IWL_SKU_A|IWL_SKU_G,
+ .ops = &iwl6000g2b_ops,
+ .eeprom_size = OTP_LOW_IMAGE_SIZE,
+ .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
+ .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
+ .num_of_queues = IWLAGN_NUM_QUEUES,
+ .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
+ .mod_params = &iwlagn_mod_params,
+ .valid_tx_ant = ANT_AB,
+ .valid_rx_ant = ANT_AB,
+ .pll_cfg_val = 0,
+ .set_l0s = true,
+ .use_bsm = false,
+ .pa_type = IWL_PA_SYSTEM,
+ .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
+ .shadow_ram_support = true,
+ .led_compensation = 51,
+ .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
+ .supports_idle = true,
+ .adv_thermal_throttle = true,
+ .support_ct_kill_exit = true,
+ .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE,
+ .chain_noise_scale = 1000,
+ .monitor_recover_period = IWL_LONG_MONITORING_PERIOD,
+ .max_event_log_size = 512,
+ .sensitivity_calib_by_driver = true,
+ .chain_noise_calib_by_driver = true,
+ .need_dc_calib = true,
+ .bt_statistics = true,
+ /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
+ .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
+ .advanced_bt_coexist = true,
+ .bt_init_traffic_load = IWL_BT_COEX_TRAFFIC_LOAD_NONE,
+ .bt_prio_boost = IWLAGN_BT_PRIO_BOOST_DEFAULT,
+};
+
+struct iwl_cfg iwl6000g2b_2bgn_cfg = {
+ .name = "6000 Series 2x2 BGN Gen2b",
+ .fw_name_pre = IWL6000G2B_FW_PRE,
+ .ucode_api_max = IWL6000G2_UCODE_API_MAX,
+ .ucode_api_min = IWL6000G2_UCODE_API_MIN,
+ .sku = IWL_SKU_G|IWL_SKU_N,
+ .ops = &iwl6000g2b_ops,
+ .eeprom_size = OTP_LOW_IMAGE_SIZE,
+ .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
+ .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
+ .num_of_queues = IWLAGN_NUM_QUEUES,
+ .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
+ .mod_params = &iwlagn_mod_params,
+ .valid_tx_ant = ANT_AB,
+ .valid_rx_ant = ANT_AB,
+ .pll_cfg_val = 0,
+ .set_l0s = true,
+ .use_bsm = false,
+ .pa_type = IWL_PA_SYSTEM,
+ .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
+ .shadow_ram_support = true,
+ .ht_greenfield_support = true,
+ .led_compensation = 51,
+ .use_rts_for_aggregation = true, /* use rts/cts protection */
+ .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
+ .supports_idle = true,
+ .adv_thermal_throttle = true,
+ .support_ct_kill_exit = true,
+ .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE,
+ .chain_noise_scale = 1000,
+ .monitor_recover_period = IWL_LONG_MONITORING_PERIOD,
+ .max_event_log_size = 512,
+ .sensitivity_calib_by_driver = true,
+ .chain_noise_calib_by_driver = true,
+ .need_dc_calib = true,
+ .bt_statistics = true,
+ /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
+ .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
+ .advanced_bt_coexist = true,
+ .bt_init_traffic_load = IWL_BT_COEX_TRAFFIC_LOAD_NONE,
+ .bt_prio_boost = IWLAGN_BT_PRIO_BOOST_DEFAULT,
+};
+
+struct iwl_cfg iwl6000g2b_2bg_cfg = {
+ .name = "6000 Series 2x2 BG Gen2b",
+ .fw_name_pre = IWL6000G2B_FW_PRE,
+ .ucode_api_max = IWL6000G2_UCODE_API_MAX,
+ .ucode_api_min = IWL6000G2_UCODE_API_MIN,
+ .sku = IWL_SKU_G,
+ .ops = &iwl6000g2b_ops,
+ .eeprom_size = OTP_LOW_IMAGE_SIZE,
+ .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
+ .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
+ .num_of_queues = IWLAGN_NUM_QUEUES,
+ .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
+ .mod_params = &iwlagn_mod_params,
+ .valid_tx_ant = ANT_AB,
+ .valid_rx_ant = ANT_AB,
+ .pll_cfg_val = 0,
+ .set_l0s = true,
+ .use_bsm = false,
+ .pa_type = IWL_PA_SYSTEM,
+ .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
+ .shadow_ram_support = true,
+ .led_compensation = 51,
+ .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
+ .supports_idle = true,
+ .adv_thermal_throttle = true,
+ .support_ct_kill_exit = true,
+ .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE,
+ .chain_noise_scale = 1000,
+ .monitor_recover_period = IWL_LONG_MONITORING_PERIOD,
+ .max_event_log_size = 512,
+ .sensitivity_calib_by_driver = true,
+ .chain_noise_calib_by_driver = true,
+ .need_dc_calib = true,
+ .bt_statistics = true,
+ /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
+ .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
+ .advanced_bt_coexist = true,
+ .bt_init_traffic_load = IWL_BT_COEX_TRAFFIC_LOAD_NONE,
+ .bt_prio_boost = IWLAGN_BT_PRIO_BOOST_DEFAULT,
+};
+
+struct iwl_cfg iwl6000g2b_bgn_cfg = {
+ .name = "6000 Series 1x2 BGN Gen2b",
+ .fw_name_pre = IWL6000G2B_FW_PRE,
+ .ucode_api_max = IWL6000G2_UCODE_API_MAX,
+ .ucode_api_min = IWL6000G2_UCODE_API_MIN,
+ .sku = IWL_SKU_G|IWL_SKU_N,
+ .ops = &iwl6000g2b_ops,
+ .eeprom_size = OTP_LOW_IMAGE_SIZE,
+ .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
+ .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
+ .num_of_queues = IWLAGN_NUM_QUEUES,
+ .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
+ .mod_params = &iwlagn_mod_params,
+ .valid_tx_ant = ANT_A,
+ .valid_rx_ant = ANT_AB,
+ .pll_cfg_val = 0,
+ .set_l0s = true,
+ .use_bsm = false,
+ .pa_type = IWL_PA_SYSTEM,
+ .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
+ .shadow_ram_support = true,
+ .ht_greenfield_support = true,
+ .led_compensation = 51,
+ .use_rts_for_aggregation = true, /* use rts/cts protection */
+ .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
+ .supports_idle = true,
+ .adv_thermal_throttle = true,
+ .support_ct_kill_exit = true,
+ .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE,
+ .chain_noise_scale = 1000,
+ .monitor_recover_period = IWL_LONG_MONITORING_PERIOD,
+ .max_event_log_size = 512,
+ .sensitivity_calib_by_driver = true,
+ .chain_noise_calib_by_driver = true,
+ .need_dc_calib = true,
+ .bt_statistics = true,
+ /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
+ .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
+ .advanced_bt_coexist = true,
+ .bt_init_traffic_load = IWL_BT_COEX_TRAFFIC_LOAD_NONE,
+ .bt_prio_boost = IWLAGN_BT_PRIO_BOOST_DEFAULT,
+};
+
+struct iwl_cfg iwl6000g2b_bg_cfg = {
+ .name = "6000 Series 1x2 BG Gen2b",
+ .fw_name_pre = IWL6000G2B_FW_PRE,
+ .ucode_api_max = IWL6000G2_UCODE_API_MAX,
+ .ucode_api_min = IWL6000G2_UCODE_API_MIN,
+ .sku = IWL_SKU_G,
+ .ops = &iwl6000g2b_ops,
+ .eeprom_size = OTP_LOW_IMAGE_SIZE,
+ .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
+ .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
+ .num_of_queues = IWLAGN_NUM_QUEUES,
+ .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
+ .mod_params = &iwlagn_mod_params,
+ .valid_tx_ant = ANT_A,
+ .valid_rx_ant = ANT_AB,
+ .pll_cfg_val = 0,
+ .set_l0s = true,
+ .use_bsm = false,
+ .pa_type = IWL_PA_SYSTEM,
+ .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
+ .shadow_ram_support = true,
+ .led_compensation = 51,
+ .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
+ .supports_idle = true,
+ .adv_thermal_throttle = true,
+ .support_ct_kill_exit = true,
+ .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE,
+ .chain_noise_scale = 1000,
+ .monitor_recover_period = IWL_LONG_MONITORING_PERIOD,
+ .max_event_log_size = 512,
+ .sensitivity_calib_by_driver = true,
+ .chain_noise_calib_by_driver = true,
+ .need_dc_calib = true,
+ .bt_statistics = true,
+ /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
+ .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
+ .advanced_bt_coexist = true,
+ .bt_init_traffic_load = IWL_BT_COEX_TRAFFIC_LOAD_NONE,
+ .bt_prio_boost = IWLAGN_BT_PRIO_BOOST_DEFAULT,
};
/*
.shadow_ram_support = true,
.ht_greenfield_support = true,
.led_compensation = 51,
- .use_rts_for_ht = true, /* use rts/cts protection */
+ .use_rts_for_aggregation = true, /* use rts/cts protection */
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.supports_idle = true,
.adv_thermal_throttle = true,
.support_ct_kill_exit = true,
.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
.chain_noise_scale = 1000,
- .monitor_recover_period = IWL_MONITORING_PERIOD,
+ .monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
.max_event_log_size = 1024,
.ucode_tracing = true,
.sensitivity_calib_by_driver = true,
.support_ct_kill_exit = true,
.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
.chain_noise_scale = 1000,
- .monitor_recover_period = IWL_MONITORING_PERIOD,
+ .monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
.max_event_log_size = 1024,
.ucode_tracing = true,
.sensitivity_calib_by_driver = true,
.support_ct_kill_exit = true,
.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
.chain_noise_scale = 1000,
- .monitor_recover_period = IWL_MONITORING_PERIOD,
+ .monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
.max_event_log_size = 1024,
.ucode_tracing = true,
.sensitivity_calib_by_driver = true,
.shadow_ram_support = true,
.ht_greenfield_support = true,
.led_compensation = 51,
- .use_rts_for_ht = true, /* use rts/cts protection */
+ .use_rts_for_aggregation = true, /* use rts/cts protection */
+ .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
+ .supports_idle = true,
+ .adv_thermal_throttle = true,
+ .support_ct_kill_exit = true,
+ .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
+ .chain_noise_scale = 1500,
+ .monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
+ .max_event_log_size = 1024,
+ .ucode_tracing = true,
+ .sensitivity_calib_by_driver = true,
+ .chain_noise_calib_by_driver = true,
+ .need_dc_calib = true,
+};
+
+struct iwl_cfg iwl6050g2_bgn_cfg = {
+ .name = "6050 Series 1x2 BGN Gen2",
+ .fw_name_pre = IWL6050_FW_PRE,
+ .ucode_api_max = IWL6050_UCODE_API_MAX,
+ .ucode_api_min = IWL6050_UCODE_API_MIN,
+ .sku = IWL_SKU_G|IWL_SKU_N,
+ .ops = &iwl6050g2_ops,
+ .eeprom_size = OTP_LOW_IMAGE_SIZE,
+ .eeprom_ver = EEPROM_6050G2_EEPROM_VERSION,
+ .eeprom_calib_ver = EEPROM_6050G2_TX_POWER_VERSION,
+ .num_of_queues = IWLAGN_NUM_QUEUES,
+ .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
+ .mod_params = &iwlagn_mod_params,
+ .valid_tx_ant = ANT_A,
+ .valid_rx_ant = ANT_AB,
+ .pll_cfg_val = 0,
+ .set_l0s = true,
+ .use_bsm = false,
+ .pa_type = IWL_PA_SYSTEM,
+ .max_ll_items = OTP_MAX_LL_ITEMS_6x50,
+ .shadow_ram_support = true,
+ .ht_greenfield_support = true,
+ .led_compensation = 51,
+ .use_rts_for_aggregation = true, /* use rts/cts protection */
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.supports_idle = true,
.adv_thermal_throttle = true,
.support_ct_kill_exit = true,
.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
.chain_noise_scale = 1500,
- .monitor_recover_period = IWL_MONITORING_PERIOD,
+ .monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
.max_event_log_size = 1024,
.ucode_tracing = true,
.sensitivity_calib_by_driver = true,
.chain_noise_calib_by_driver = true,
+ .need_dc_calib = true,
};
struct iwl_cfg iwl6050_2abg_cfg = {
.support_ct_kill_exit = true,
.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
.chain_noise_scale = 1500,
- .monitor_recover_period = IWL_MONITORING_PERIOD,
+ .monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
.max_event_log_size = 1024,
.ucode_tracing = true,
.sensitivity_calib_by_driver = true,
.chain_noise_calib_by_driver = true,
+ .need_dc_calib = true,
};
struct iwl_cfg iwl6000_3agn_cfg = {
.shadow_ram_support = true,
.ht_greenfield_support = true,
.led_compensation = 51,
- .use_rts_for_ht = true, /* use rts/cts protection */
+ .use_rts_for_aggregation = true, /* use rts/cts protection */
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.supports_idle = true,
.adv_thermal_throttle = true,
.support_ct_kill_exit = true,
.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
.chain_noise_scale = 1000,
- .monitor_recover_period = IWL_MONITORING_PERIOD,
+ .monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
.max_event_log_size = 1024,
.ucode_tracing = true,
.sensitivity_calib_by_driver = true,
MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_MAX));
MODULE_FIRMWARE(IWL6050_MODULE_FIRMWARE(IWL6050_UCODE_API_MAX));
MODULE_FIRMWARE(IWL6000G2A_MODULE_FIRMWARE(IWL6000G2_UCODE_API_MAX));
+MODULE_FIRMWARE(IWL6000G2B_MODULE_FIRMWARE(IWL6000G2_UCODE_API_MAX));
projects / karo-tx-linux.git / blobdiff