#include "iwl-agn-hw.h"
#include "iwl-6000-hw.h"
#include "iwl-agn-led.h"
+#include "iwl-agn-debugfs.h"
/* Highest firmware API version supported */
#define IWL6000_UCODE_API_MAX 4
#define IWL6050_UCODE_API_MAX 4
+#define IWL6000G2_UCODE_API_MAX 4
/* Lowest firmware API version supported */
#define IWL6000_UCODE_API_MIN 4
#define IWL6050_UCODE_API_MIN 4
+#define IWL6000G2_UCODE_API_MIN 4
#define IWL6000_FW_PRE "iwlwifi-6000-"
-#define IWL6000_G2_FW_PRE "iwlwifi-6005-"
#define _IWL6000_MODULE_FIRMWARE(api) IWL6000_FW_PRE #api ".ucode"
#define IWL6000_MODULE_FIRMWARE(api) _IWL6000_MODULE_FIRMWARE(api)
#define _IWL6050_MODULE_FIRMWARE(api) IWL6050_FW_PRE #api ".ucode"
#define IWL6050_MODULE_FIRMWARE(api) _IWL6050_MODULE_FIRMWARE(api)
+#define IWL6000G2A_FW_PRE "iwlwifi-6000g2a-"
+#define _IWL6000G2A_MODULE_FIRMWARE(api) IWL6000G2A_FW_PRE #api ".ucode"
+#define IWL6000G2A_MODULE_FIRMWARE(api) _IWL6000G2A_MODULE_FIRMWARE(api)
+
+
static void iwl6000_set_ct_threshold(struct iwl_priv *priv)
{
/* want Celsius */
/* Set initial sensitivity parameters */
/* Set initial calibration set */
priv->hw_params.sens = &iwl6000_sensitivity;
- switch (priv->hw_rev & CSR_HW_REV_TYPE_MSK) {
- case CSR_HW_REV_TYPE_6x50:
- priv->hw_params.calib_init_cfg =
- BIT(IWL_CALIB_XTAL) |
- BIT(IWL_CALIB_DC) |
- BIT(IWL_CALIB_LO) |
- BIT(IWL_CALIB_TX_IQ) |
- BIT(IWL_CALIB_BASE_BAND);
-
- break;
- default:
- priv->hw_params.calib_init_cfg =
- BIT(IWL_CALIB_XTAL) |
- BIT(IWL_CALIB_LO) |
- BIT(IWL_CALIB_TX_IQ) |
- BIT(IWL_CALIB_BASE_BAND);
- break;
- }
+ priv->hw_params.calib_init_cfg =
+ BIT(IWL_CALIB_XTAL) |
+ BIT(IWL_CALIB_LO) |
+ BIT(IWL_CALIB_TX_IQ) |
+ BIT(IWL_CALIB_BASE_BAND);
+
+ return 0;
+}
+
+static int iwl6050_hw_set_hw_params(struct iwl_priv *priv)
+{
+ if (priv->cfg->mod_params->num_of_queues >= IWL_MIN_NUM_QUEUES &&
+ priv->cfg->mod_params->num_of_queues <= IWLAGN_NUM_QUEUES)
+ priv->cfg->num_of_queues =
+ priv->cfg->mod_params->num_of_queues;
+
+ priv->hw_params.max_txq_num = priv->cfg->num_of_queues;
+ priv->hw_params.dma_chnl_num = FH50_TCSR_CHNL_NUM;
+ priv->hw_params.scd_bc_tbls_size =
+ priv->cfg->num_of_queues *
+ sizeof(struct iwlagn_scd_bc_tbl);
+ priv->hw_params.tfd_size = sizeof(struct iwl_tfd);
+ priv->hw_params.max_stations = IWL5000_STATION_COUNT;
+ priv->hw_params.bcast_sta_id = IWL5000_BROADCAST_ID;
+
+ priv->hw_params.max_data_size = IWL60_RTC_DATA_SIZE;
+ priv->hw_params.max_inst_size = IWL60_RTC_INST_SIZE;
+
+ priv->hw_params.max_bsm_size = 0;
+ priv->hw_params.ht40_channel = BIT(IEEE80211_BAND_2GHZ) |
+ BIT(IEEE80211_BAND_5GHZ);
+ priv->hw_params.rx_wrt_ptr_reg = FH_RSCSR_CHNL0_WPTR;
+
+ priv->hw_params.tx_chains_num = num_of_ant(priv->cfg->valid_tx_ant);
+ priv->hw_params.rx_chains_num = num_of_ant(priv->cfg->valid_rx_ant);
+ priv->hw_params.valid_tx_ant = priv->cfg->valid_tx_ant;
+ priv->hw_params.valid_rx_ant = priv->cfg->valid_rx_ant;
+
+ if (priv->cfg->ops->lib->temp_ops.set_ct_kill)
+ priv->cfg->ops->lib->temp_ops.set_ct_kill(priv);
+
+ /* Set initial sensitivity parameters */
+ /* Set initial calibration set */
+ priv->hw_params.sens = &iwl6000_sensitivity;
+ priv->hw_params.calib_init_cfg =
+ BIT(IWL_CALIB_XTAL) |
+ BIT(IWL_CALIB_DC) |
+ BIT(IWL_CALIB_LO) |
+ BIT(IWL_CALIB_TX_IQ) |
+ BIT(IWL_CALIB_BASE_BAND);
return 0;
}
EEPROM_REG_BAND_3_CHANNELS,
EEPROM_REG_BAND_4_CHANNELS,
EEPROM_REG_BAND_5_CHANNELS,
- EEPROM_REG_BAND_24_HT40_CHANNELS,
+ EEPROM_6000_REG_BAND_24_HT40_CHANNELS,
EEPROM_REG_BAND_52_HT40_CHANNELS
},
.verify_signature = iwlcore_eeprom_verify_signature,
.set_ct_kill = iwl6000_set_ct_threshold,
},
.add_bcast_station = iwl_add_bcast_station,
+ .debugfs_ops = {
+ .rx_stats_read = iwl_ucode_rx_stats_read,
+ .tx_stats_read = iwl_ucode_tx_stats_read,
+ .general_stats_read = iwl_ucode_general_stats_read,
+ },
.recover_from_tx_stall = iwl_bg_monitor_recover,
.check_plcp_health = iwl_good_plcp_health,
.check_ack_health = iwl_good_ack_health,
};
static struct iwl_lib_ops iwl6050_lib = {
- .set_hw_params = iwl6000_hw_set_hw_params,
+ .set_hw_params = iwl6050_hw_set_hw_params,
.txq_update_byte_cnt_tbl = iwlagn_txq_update_byte_cnt_tbl,
.txq_inval_byte_cnt_tbl = iwlagn_txq_inval_byte_cnt_tbl,
.txq_set_sched = iwlagn_txq_set_sched,
EEPROM_REG_BAND_3_CHANNELS,
EEPROM_REG_BAND_4_CHANNELS,
EEPROM_REG_BAND_5_CHANNELS,
- EEPROM_REG_BAND_24_HT40_CHANNELS,
+ EEPROM_6000_REG_BAND_24_HT40_CHANNELS,
EEPROM_REG_BAND_52_HT40_CHANNELS
},
.verify_signature = iwlcore_eeprom_verify_signature,
.set_calib_version = iwl6050_set_calib_version,
},
.add_bcast_station = iwl_add_bcast_station,
+ .debugfs_ops = {
+ .rx_stats_read = iwl_ucode_rx_stats_read,
+ .tx_stats_read = iwl_ucode_tx_stats_read,
+ .general_stats_read = iwl_ucode_general_stats_read,
+ },
.recover_from_tx_stall = iwl_bg_monitor_recover,
.check_plcp_health = iwl_good_plcp_health,
.check_ack_health = iwl_good_ack_health,
.led = &iwlagn_led_ops,
};
-/*
- * "i": Internal configuration, use internal Power Amplifier
- */
-struct iwl_cfg iwl6000i_g2_2agn_cfg = {
- .name = "6000 Series 2x2 AGN Gen2",
- .fw_name_pre = IWL6000_G2_FW_PRE,
- .ucode_api_max = IWL6000_UCODE_API_MAX,
- .ucode_api_min = IWL6000_UCODE_API_MIN,
+
+struct iwl_cfg iwl6000g2a_2agn_cfg = {
+ .name = "6000 Series 2x2 AGN Gen2a",
+ .fw_name_pre = IWL6000G2A_FW_PRE,
+ .ucode_api_max = IWL6000G2_UCODE_API_MAX,
+ .ucode_api_min = IWL6000G2_UCODE_API_MIN,
.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
.ops = &iwl6000_ops,
.eeprom_size = OTP_LOW_IMAGE_SIZE,
- .eeprom_ver = EEPROM_6000_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,
+ .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
+ .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
.num_of_queues = IWLAGN_NUM_QUEUES,
.num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
.mod_params = &iwlagn_mod_params,
.pll_cfg_val = 0,
.set_l0s = true,
.use_bsm = false,
- .pa_type = IWL_PA_INTERNAL,
+ .pa_type = IWL_PA_SYSTEM,
.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
.shadow_ram_support = true,
.ht_greenfield_support = true,
.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
.chain_noise_scale = 1000,
.monitor_recover_period = IWL_MONITORING_PERIOD,
+ .max_event_log_size = 512,
};
+/*
+ * "i": Internal configuration, use internal Power Amplifier
+ */
struct iwl_cfg iwl6000i_2agn_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N 6200 AGN",
.fw_name_pre = IWL6000_FW_PRE,
.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
.chain_noise_scale = 1000,
.monitor_recover_period = IWL_MONITORING_PERIOD,
+ .max_event_log_size = 1024,
};
struct iwl_cfg iwl6000i_2abg_cfg = {
.pa_type = IWL_PA_INTERNAL,
.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
.shadow_ram_support = true,
- .ht_greenfield_support = true,
.led_compensation = 51,
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.supports_idle = true,
.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
.chain_noise_scale = 1000,
.monitor_recover_period = IWL_MONITORING_PERIOD,
+ .max_event_log_size = 1024,
};
struct iwl_cfg iwl6000i_2bg_cfg = {
.pa_type = IWL_PA_INTERNAL,
.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
.shadow_ram_support = true,
- .ht_greenfield_support = true,
.led_compensation = 51,
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.supports_idle = true,
.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
.chain_noise_scale = 1000,
.monitor_recover_period = IWL_MONITORING_PERIOD,
+ .max_event_log_size = 1024,
};
struct iwl_cfg iwl6050_2agn_cfg = {
.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
.chain_noise_scale = 1500,
.monitor_recover_period = IWL_MONITORING_PERIOD,
+ .max_event_log_size = 1024,
};
struct iwl_cfg iwl6050_2abg_cfg = {
.pa_type = IWL_PA_SYSTEM,
.max_ll_items = OTP_MAX_LL_ITEMS_6x50,
.shadow_ram_support = true,
- .ht_greenfield_support = true,
.led_compensation = 51,
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.supports_idle = true,
.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
.chain_noise_scale = 1500,
.monitor_recover_period = IWL_MONITORING_PERIOD,
+ .max_event_log_size = 1024,
};
struct iwl_cfg iwl6000_3agn_cfg = {
.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
.chain_noise_scale = 1000,
.monitor_recover_period = IWL_MONITORING_PERIOD,
+ .max_event_log_size = 1024,
};
MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_MAX));
MODULE_FIRMWARE(IWL6050_MODULE_FIRMWARE(IWL6050_UCODE_API_MAX));
+MODULE_FIRMWARE(IWL6000G2A_MODULE_FIRMWARE(IWL6000G2_UCODE_API_MAX));
projects / karo-tx-linux.git / blobdiff