* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*****************************************************************************/
-#ifndef __iwl_pci_h__
-#define __iwl_pci_h__
+#ifndef __iwl_bus_h__
+#define __iwl_bus_h__
+#include <linux/types.h>
+#include <linux/spinlock.h>
+
+/**
+ * DOC: Bus layer - role and goal
+ *
+ * iwl-bus.h defines the API to the bus layer of the iwlwifi driver.
+ * The bus layer is responsible for doing very basic bus operations that are
+ * listed in the iwl_bus_ops structure.
+ * The bus layer registers to the bus driver, advertises the supported HW and
+ * gets notifications about enumeration, suspend, resume.
+ * For the moment, the bus layer is not a linux kernel module as itself, and
+ * the module_init function of the driver must call the bus specific
+ * registration functions. These functions are listed at the end of this file.
+ * For the moment, there is only one implementation of this interface: PCI-e.
+ * This implementation is iwl-pci.c
+ */
+
+/**
+ * DOC: encapsulation and type safety
+ *
+ * The iwl_bus describes the data that is shared amongst all the bus layer
+ * implementations. This data is visible to other layers. Data in the bus
+ * specific area is not visible outside the bus specific implementation.
+ * iwl_bus holds a pointer to iwl_shared which holds pointer to all the other
+ * layers of the driver (iwl_priv, iwl_trans). In fact, this is the way to go
+ * when the transport layer needs to call a function of another layer.
+ *
+ * In order to achieve encapsulation, iwl_priv cannot be dereferenced from the
+ * bus layer. Type safety is still kept since functions that gets iwl_priv gets
+ * a typed pointer (as opposed to void *).
+ */
+
+/**
+ * DOC: probe flow
+ *
+ * The module_init calls the bus specific registration function. The
+ * registration to the bus layer will trigger an enumeration of the bus which
+ * will call the bus specific probe function.
+ * The first thing this function must do is to allocate the memory needed by
+ * iwl_bus + the bus_specific data.
+ * Once the bus specific probe function has configured the hardware, it
+ * chooses the appropriate transport layer and calls iwl_probe that will run
+ * the bus independent probe flow.
+ *
+ * Note: The bus specific code must set the following data in iwl_bus before it
+ * calls iwl_probe:
+ * * bus->dev
+ * * bus->irq
+ * * bus->ops
+ */
+
+struct iwl_shared;
struct iwl_bus;
/**
* struct iwl_bus_ops - bus specific operations
* @get_pm_support: must returns true if the bus can go to sleep
- * @apm_config: will be called during the config of the APM configuration
- * @set_drv_data: set the drv_data pointer to the bus layer
+ * @apm_config: will be called during the config of the APM
* @get_hw_id: prints the hw_id in the provided buffer
* @write8: write a byte to register at offset ofs
* @write32: write a dword to register at offset ofs
struct iwl_bus_ops {
bool (*get_pm_support)(struct iwl_bus *bus);
void (*apm_config)(struct iwl_bus *bus);
- void (*set_drv_data)(struct iwl_bus *bus, void *drv_data);
void (*get_hw_id)(struct iwl_bus *bus, char buf[], int buf_len);
void (*write8)(struct iwl_bus *bus, u32 ofs, u8 val);
void (*write32)(struct iwl_bus *bus, u32 ofs, u32 val);
u32 (*read32)(struct iwl_bus *bus, u32 ofs);
};
+/**
+ * struct iwl_bus - bus common data
+ *
+ * This data is common to all bus layer implementations.
+ *
+ * @dev - pointer to struct device * that represents the device
+ * @ops - pointer to iwl_bus_ops
+ * @shrd - pointer to iwl_shared which holds shared data from the upper layer
+ * NB: for the time being this needs to be set by the upper layer since
+ * it allocates the shared data
+ * @irq - the irq number for the device
+ * @reg_lock - protect hw register access
+ */
struct iwl_bus {
- /* Common data to all buses */
- void *drv_data; /* driver's context */
struct device *dev;
- struct iwl_bus_ops *ops;
+ const struct iwl_bus_ops *ops;
+ struct iwl_shared *shrd;
unsigned int irq;
+ spinlock_t reg_lock;
/* pointer to bus specific struct */
/*Ensure that this pointer will always be aligned to sizeof pointer */
bus->ops->apm_config(bus);
}
-static inline void bus_set_drv_data(struct iwl_bus *bus, void *drv_data)
-{
- bus->ops->set_drv_data(bus, drv_data);
-}
-
static inline void bus_get_hw_id(struct iwl_bus *bus, char buf[], int buf_len)
{
bus->ops->get_hw_id(bus, buf, buf_len);
return bus->ops->read32(bus, ofs);
}
+/*****************************************************
+* Bus layer registration functions
+******************************************************/
int __must_check iwl_pci_register_driver(void);
void iwl_pci_unregister_driver(void);
-#endif
+#endif /* __iwl_bus_h__ */
projects / karo-tx-linux.git / blobdiff