rxon->flags |= cpu_to_le32(val << RXON_FLG_HT_OPERATING_MODE_POS);
- iwl_set_rxon_chain(priv);
+ if (priv->cfg->ops->hcmd->set_rxon_chain)
+ priv->cfg->ops->hcmd->set_rxon_chain(priv);
IWL_DEBUG_ASSOC(priv, "supported HT rate 0x%X 0x%X 0x%X "
"rxon flags 0x%X operation mode :0x%X "
memcpy(priv->staging_rxon.wlap_bssid_addr, priv->mac_addr, ETH_ALEN);
priv->staging_rxon.ofdm_ht_single_stream_basic_rates = 0xff;
priv->staging_rxon.ofdm_ht_dual_stream_basic_rates = 0xff;
+ priv->staging_rxon.ofdm_ht_triple_stream_basic_rates = 0xff;
}
EXPORT_SYMBOL(iwl_connection_init_rx_config);
hw->wiphy->custom_regulatory = true;
hw->wiphy->max_scan_ssids = 1;
+ hw->wiphy->max_scan_ie_len = 0; /* XXX for now */
/* Default value; 4 EDCA QOS priorities */
hw->queues = 4;
mutex_init(&priv->mutex);
/* Clear the driver's (not device's) station table */
- iwl_clear_stations_table(priv);
+ priv->cfg->ops->smgmt->clear_station_table(priv);
priv->data_retry_limit = -1;
priv->ieee_channels = NULL;
priv->current_ht_config.sm_ps = WLAN_HT_CAP_SM_PS_DISABLED;
/* Choose which receivers/antennas to use */
- iwl_set_rxon_chain(priv);
+ if (priv->cfg->ops->hcmd->set_rxon_chain)
+ priv->cfg->ops->hcmd->set_rxon_chain(priv);
+
iwl_init_scan_params(priv);
iwl_reset_qos(priv);
"HW and/or SW RF Kill no longer active, restarting "
"device\n");
if (!test_bit(STATUS_EXIT_PENDING, &priv->status) &&
- test_bit(STATUS_ALIVE, &priv->status))
+ priv->is_open)
queue_work(priv->workqueue, &priv->restart);
} else {
/* make sure mac80211 stop sending Tx frame */
}
EXPORT_SYMBOL(iwl_rx_reply_error);
+int iwl_mac_conf_tx(struct ieee80211_hw *hw, u16 queue,
+ const struct ieee80211_tx_queue_params *params)
+{
+ struct iwl_priv *priv = hw->priv;
+ unsigned long flags;
+ int q;
+
+ IWL_DEBUG_MAC80211(priv, "enter\n");
+
+ if (!iwl_is_ready_rf(priv)) {
+ IWL_DEBUG_MAC80211(priv, "leave - RF not ready\n");
+ return -EIO;
+ }
+
+ if (queue >= AC_NUM) {
+ IWL_DEBUG_MAC80211(priv, "leave - queue >= AC_NUM %d\n", queue);
+ return 0;
+ }
+
+ q = AC_NUM - 1 - queue;
+
+ spin_lock_irqsave(&priv->lock, flags);
+
+ priv->qos_data.def_qos_parm.ac[q].cw_min = cpu_to_le16(params->cw_min);
+ priv->qos_data.def_qos_parm.ac[q].cw_max = cpu_to_le16(params->cw_max);
+ priv->qos_data.def_qos_parm.ac[q].aifsn = params->aifs;
+ priv->qos_data.def_qos_parm.ac[q].edca_txop =
+ cpu_to_le16((params->txop * 32));
+
+ priv->qos_data.def_qos_parm.ac[q].reserved1 = 0;
+ priv->qos_data.qos_active = 1;
+
+ if (priv->iw_mode == NL80211_IFTYPE_AP)
+ iwl_activate_qos(priv, 1);
+ else if (priv->assoc_id && iwl_is_associated(priv))
+ iwl_activate_qos(priv, 0);
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ IWL_DEBUG_MAC80211(priv, "leave\n");
+ return 0;
+}
+EXPORT_SYMBOL(iwl_mac_conf_tx);
+
+static void iwl_ht_conf(struct iwl_priv *priv,
+ struct ieee80211_bss_conf *bss_conf)
+{
+ struct ieee80211_sta_ht_cap *ht_conf;
+ struct iwl_ht_info *iwl_conf = &priv->current_ht_config;
+ struct ieee80211_sta *sta;
+
+ IWL_DEBUG_MAC80211(priv, "enter: \n");
+
+ if (!iwl_conf->is_ht)
+ return;
+
+
+ /*
+ * It is totally wrong to base global information on something
+ * that is valid only when associated, alas, this driver works
+ * that way and I don't know how to fix it.
+ */
+
+ rcu_read_lock();
+ sta = ieee80211_find_sta(priv->hw, priv->bssid);
+ if (!sta) {
+ rcu_read_unlock();
+ return;
+ }
+ ht_conf = &sta->ht_cap;
+
+ if (ht_conf->cap & IEEE80211_HT_CAP_SGI_20)
+ iwl_conf->sgf |= HT_SHORT_GI_20MHZ;
+ if (ht_conf->cap & IEEE80211_HT_CAP_SGI_40)
+ iwl_conf->sgf |= HT_SHORT_GI_40MHZ;
+
+ iwl_conf->is_green_field = !!(ht_conf->cap & IEEE80211_HT_CAP_GRN_FLD);
+ iwl_conf->max_amsdu_size =
+ !!(ht_conf->cap & IEEE80211_HT_CAP_MAX_AMSDU);
+
+ iwl_conf->supported_chan_width =
+ !!(ht_conf->cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40);
+
+ /*
+ * XXX: The HT configuration needs to be moved into iwl_mac_config()
+ * to be done there correctly.
+ */
+
+ iwl_conf->extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_NONE;
+ if (conf_is_ht40_minus(&priv->hw->conf))
+ iwl_conf->extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_BELOW;
+ else if (conf_is_ht40_plus(&priv->hw->conf))
+ iwl_conf->extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_ABOVE;
+
+ /* If no above or below channel supplied disable FAT channel */
+ if (iwl_conf->extension_chan_offset != IEEE80211_HT_PARAM_CHA_SEC_ABOVE &&
+ iwl_conf->extension_chan_offset != IEEE80211_HT_PARAM_CHA_SEC_BELOW)
+ iwl_conf->supported_chan_width = 0;
+
+ iwl_conf->sm_ps = (u8)((ht_conf->cap & IEEE80211_HT_CAP_SM_PS) >> 2);
+
+ memcpy(&iwl_conf->mcs, &ht_conf->mcs, 16);
+
+ iwl_conf->tx_chan_width = iwl_conf->supported_chan_width != 0;
+ iwl_conf->ht_protection =
+ bss_conf->ht.operation_mode & IEEE80211_HT_OP_MODE_PROTECTION;
+ iwl_conf->non_GF_STA_present =
+ !!(bss_conf->ht.operation_mode & IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT);
+
+ rcu_read_unlock();
+
+ IWL_DEBUG_MAC80211(priv, "leave\n");
+}
+
+#define IWL_DELAY_NEXT_SCAN_AFTER_ASSOC (HZ*6)
+void iwl_bss_info_changed(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_bss_conf *bss_conf,
+ u32 changes)
+{
+ struct iwl_priv *priv = hw->priv;
+
+ IWL_DEBUG_MAC80211(priv, "changes = 0x%X\n", changes);
+
+ if (changes & BSS_CHANGED_ERP_PREAMBLE) {
+ IWL_DEBUG_MAC80211(priv, "ERP_PREAMBLE %d\n",
+ bss_conf->use_short_preamble);
+ if (bss_conf->use_short_preamble)
+ priv->staging_rxon.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
+ else
+ priv->staging_rxon.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
+ }
+
+ if (changes & BSS_CHANGED_ERP_CTS_PROT) {
+ IWL_DEBUG_MAC80211(priv, "ERP_CTS %d\n", bss_conf->use_cts_prot);
+ if (bss_conf->use_cts_prot && (priv->band != IEEE80211_BAND_5GHZ))
+ priv->staging_rxon.flags |= RXON_FLG_TGG_PROTECT_MSK;
+ else
+ priv->staging_rxon.flags &= ~RXON_FLG_TGG_PROTECT_MSK;
+ }
+
+ if (changes & BSS_CHANGED_HT) {
+ iwl_ht_conf(priv, bss_conf);
+
+ if (priv->cfg->ops->hcmd->set_rxon_chain)
+ priv->cfg->ops->hcmd->set_rxon_chain(priv);
+ }
+
+ if (changes & BSS_CHANGED_ASSOC) {
+ IWL_DEBUG_MAC80211(priv, "ASSOC %d\n", bss_conf->assoc);
+ /* This should never happen as this function should
+ * never be called from interrupt context. */
+ if (WARN_ON_ONCE(in_interrupt()))
+ return;
+ if (bss_conf->assoc) {
+ priv->assoc_id = bss_conf->aid;
+ priv->beacon_int = bss_conf->beacon_int;
+ priv->power_data.dtim_period = bss_conf->dtim_period;
+ priv->timestamp = bss_conf->timestamp;
+ priv->assoc_capability = bss_conf->assoc_capability;
+
+ /* we have just associated, don't start scan too early
+ * leave time for EAPOL exchange to complete
+ */
+ priv->next_scan_jiffies = jiffies +
+ IWL_DELAY_NEXT_SCAN_AFTER_ASSOC;
+ mutex_lock(&priv->mutex);
+ priv->cfg->ops->lib->post_associate(priv);
+ mutex_unlock(&priv->mutex);
+ } else {
+ priv->assoc_id = 0;
+ IWL_DEBUG_MAC80211(priv, "DISASSOC %d\n", bss_conf->assoc);
+ }
+ } else if (changes && iwl_is_associated(priv) && priv->assoc_id) {
+ IWL_DEBUG_MAC80211(priv, "Associated Changes %d\n", changes);
+ iwl_send_rxon_assoc(priv);
+ }
+
+}
+EXPORT_SYMBOL(iwl_bss_info_changed);
+
+int iwl_mac_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb)
+{
+ struct iwl_priv *priv = hw->priv;
+ unsigned long flags;
+ __le64 timestamp;
+
+ IWL_DEBUG_MAC80211(priv, "enter\n");
+
+ if (!iwl_is_ready_rf(priv)) {
+ IWL_DEBUG_MAC80211(priv, "leave - RF not ready\n");
+ return -EIO;
+ }
+
+ if (priv->iw_mode != NL80211_IFTYPE_ADHOC) {
+ IWL_DEBUG_MAC80211(priv, "leave - not IBSS\n");
+ return -EIO;
+ }
+
+ spin_lock_irqsave(&priv->lock, flags);
+
+ if (priv->ibss_beacon)
+ dev_kfree_skb(priv->ibss_beacon);
+
+ priv->ibss_beacon = skb;
+
+ priv->assoc_id = 0;
+ timestamp = ((struct ieee80211_mgmt *)skb->data)->u.beacon.timestamp;
+ priv->timestamp = le64_to_cpu(timestamp);
+
+ IWL_DEBUG_MAC80211(priv, "leave\n");
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ iwl_reset_qos(priv);
+
+ priv->cfg->ops->lib->post_associate(priv);
+
+
+ return 0;
+}
+EXPORT_SYMBOL(iwl_mac_beacon_update);
+
+int iwl_set_mode(struct iwl_priv *priv, int mode)
+{
+ if (mode == NL80211_IFTYPE_ADHOC) {
+ const struct iwl_channel_info *ch_info;
+
+ ch_info = iwl_get_channel_info(priv,
+ priv->band,
+ le16_to_cpu(priv->staging_rxon.channel));
+
+ if (!ch_info || !is_channel_ibss(ch_info)) {
+ IWL_ERR(priv, "channel %d not IBSS channel\n",
+ le16_to_cpu(priv->staging_rxon.channel));
+ return -EINVAL;
+ }
+ }
+
+ iwl_connection_init_rx_config(priv, mode);
+
+ if (priv->cfg->ops->hcmd->set_rxon_chain)
+ priv->cfg->ops->hcmd->set_rxon_chain(priv);
+
+ memcpy(priv->staging_rxon.node_addr, priv->mac_addr, ETH_ALEN);
+
+ priv->cfg->ops->smgmt->clear_station_table(priv);
+
+ /* dont commit rxon if rf-kill is on*/
+ if (!iwl_is_ready_rf(priv))
+ return -EAGAIN;
+
+ cancel_delayed_work(&priv->scan_check);
+ if (iwl_scan_cancel_timeout(priv, 100)) {
+ IWL_WARN(priv, "Aborted scan still in progress after 100ms\n");
+ IWL_DEBUG_MAC80211(priv, "leaving - scan abort failed.\n");
+ return -EAGAIN;
+ }
+
+ iwlcore_commit_rxon(priv);
+
+ return 0;
+}
+EXPORT_SYMBOL(iwl_set_mode);
+
+#ifdef CONFIG_PM
+
+int iwl_pci_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ struct iwl_priv *priv = pci_get_drvdata(pdev);
+
+ /*
+ * This function is called when system goes into suspend state
+ * mac80211 will call iwl_mac_stop() from the mac80211 suspend function
+ * first but since iwl_mac_stop() has no knowledge of who the caller is,
+ * it will not call apm_ops.stop() to stop the DMA operation.
+ * Calling apm_ops.stop here to make sure we stop the DMA.
+ */
+ priv->cfg->ops->lib->apm_ops.stop(priv);
+
+ pci_save_state(pdev);
+ pci_disable_device(pdev);
+ pci_set_power_state(pdev, PCI_D3hot);
+
+ return 0;
+}
+EXPORT_SYMBOL(iwl_pci_suspend);
+
+int iwl_pci_resume(struct pci_dev *pdev)
+{
+ struct iwl_priv *priv = pci_get_drvdata(pdev);
+ int ret;
+
+ pci_set_power_state(pdev, PCI_D0);
+ ret = pci_enable_device(pdev);
+ if (ret)
+ return ret;
+ pci_restore_state(pdev);
+ iwl_enable_interrupts(priv);
+
+ return 0;
+}
+EXPORT_SYMBOL(iwl_pci_resume);
+
+#endif /* CONFIG_PM */