module_param(bt_coex_active, bool, S_IRUGO);
MODULE_PARM_DESC(bt_coex_active, "enable wifi/bluetooth co-exist");
-static struct iwl_wimax_coex_event_entry cu_priorities[COEX_NUM_OF_EVENTS] = {
- {COEX_CU_UNASSOC_IDLE_RP, COEX_CU_UNASSOC_IDLE_WP,
- 0, COEX_UNASSOC_IDLE_FLAGS},
- {COEX_CU_UNASSOC_MANUAL_SCAN_RP, COEX_CU_UNASSOC_MANUAL_SCAN_WP,
- 0, COEX_UNASSOC_MANUAL_SCAN_FLAGS},
- {COEX_CU_UNASSOC_AUTO_SCAN_RP, COEX_CU_UNASSOC_AUTO_SCAN_WP,
- 0, COEX_UNASSOC_AUTO_SCAN_FLAGS},
- {COEX_CU_CALIBRATION_RP, COEX_CU_CALIBRATION_WP,
- 0, COEX_CALIBRATION_FLAGS},
- {COEX_CU_PERIODIC_CALIBRATION_RP, COEX_CU_PERIODIC_CALIBRATION_WP,
- 0, COEX_PERIODIC_CALIBRATION_FLAGS},
- {COEX_CU_CONNECTION_ESTAB_RP, COEX_CU_CONNECTION_ESTAB_WP,
- 0, COEX_CONNECTION_ESTAB_FLAGS},
- {COEX_CU_ASSOCIATED_IDLE_RP, COEX_CU_ASSOCIATED_IDLE_WP,
- 0, COEX_ASSOCIATED_IDLE_FLAGS},
- {COEX_CU_ASSOC_MANUAL_SCAN_RP, COEX_CU_ASSOC_MANUAL_SCAN_WP,
- 0, COEX_ASSOC_MANUAL_SCAN_FLAGS},
- {COEX_CU_ASSOC_AUTO_SCAN_RP, COEX_CU_ASSOC_AUTO_SCAN_WP,
- 0, COEX_ASSOC_AUTO_SCAN_FLAGS},
- {COEX_CU_ASSOC_ACTIVE_LEVEL_RP, COEX_CU_ASSOC_ACTIVE_LEVEL_WP,
- 0, COEX_ASSOC_ACTIVE_LEVEL_FLAGS},
- {COEX_CU_RF_ON_RP, COEX_CU_RF_ON_WP, 0, COEX_CU_RF_ON_FLAGS},
- {COEX_CU_RF_OFF_RP, COEX_CU_RF_OFF_WP, 0, COEX_RF_OFF_FLAGS},
- {COEX_CU_STAND_ALONE_DEBUG_RP, COEX_CU_STAND_ALONE_DEBUG_WP,
- 0, COEX_STAND_ALONE_DEBUG_FLAGS},
- {COEX_CU_IPAN_ASSOC_LEVEL_RP, COEX_CU_IPAN_ASSOC_LEVEL_WP,
- 0, COEX_IPAN_ASSOC_LEVEL_FLAGS},
- {COEX_CU_RSRVD1_RP, COEX_CU_RSRVD1_WP, 0, COEX_RSRVD1_FLAGS},
- {COEX_CU_RSRVD2_RP, COEX_CU_RSRVD2_WP, 0, COEX_RSRVD2_FLAGS}
-};
-
#define IWL_DECLARE_RATE_INFO(r, s, ip, in, rp, rn, pp, np) \
[IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP, \
IWL_RATE_SISO_##s##M_PLCP, \
return res;
}
-/**
- * iwl_is_monitor_mode - Determine if interface in monitor mode
- *
- * priv->iw_mode is set in add_interface, but add_interface is
- * never called for monitor mode. The only way mac80211 informs us about
- * monitor mode is through configuring filters (call to configure_filter).
- */
-bool iwl_is_monitor_mode(struct iwl_priv *priv)
-{
- return !!(priv->staging_rxon.filter_flags & RXON_FILTER_PROMISC_MSK);
-}
-EXPORT_SYMBOL(iwl_is_monitor_mode);
-
/**
* iwl_set_rxon_chain - Set up Rx chain usage in "staging" RXON image
*
rx_chain |= active_rx_cnt << RXON_RX_CHAIN_MIMO_CNT_POS;
rx_chain |= idle_rx_cnt << RXON_RX_CHAIN_CNT_POS;
- /* copied from 'iwl_bg_request_scan()' */
- /* Force use of chains B and C (0x6) for Rx
- * Avoid A (0x1) for the device has off-channel reception on A-band.
- * MIMO is not used here, but value is required */
- if (iwl_is_monitor_mode(priv) &&
- !(priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) &&
- priv->cfg->off_channel_workaround) {
- rx_chain = ANT_ABC << RXON_RX_CHAIN_VALID_POS;
- rx_chain |= ANT_BC << RXON_RX_CHAIN_FORCE_SEL_POS;
- rx_chain |= ANT_ABC << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS;
- rx_chain |= 0x1 << RXON_RX_CHAIN_DRIVER_FORCE_POS;
- }
-
priv->staging_rxon.rx_chain = cpu_to_le16(rx_chain);
if (!is_single && (active_rx_cnt >= IWL_NUM_RX_CHAINS_SINGLE) && is_cam)
/* Cancel currently queued command. */
clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
+ IWL_ERR(priv, "Loaded firmware version: %s\n",
+ priv->hw->wiphy->fw_version);
+
priv->cfg->ops->lib->dump_nic_error_log(priv);
if (priv->cfg->ops->lib->dump_csr)
priv->cfg->ops->lib->dump_csr(priv);
}
EXPORT_SYMBOL(iwl_isr_legacy);
-int iwl_send_bt_config(struct iwl_priv *priv)
+void iwl_send_bt_config(struct iwl_priv *priv)
{
struct iwl_bt_cmd bt_cmd = {
.lead_time = BT_LEAD_TIME_DEF,
IWL_DEBUG_INFO(priv, "BT coex %s\n",
(bt_cmd.flags == BT_COEX_DISABLE) ? "disable" : "active");
- return iwl_send_cmd_pdu(priv, REPLY_BT_CONFIG,
- sizeof(struct iwl_bt_cmd), &bt_cmd);
+ if (iwl_send_cmd_pdu(priv, REPLY_BT_CONFIG,
+ sizeof(struct iwl_bt_cmd), &bt_cmd))
+ IWL_ERR(priv, "failed to send BT Coex Config\n");
}
EXPORT_SYMBOL(iwl_send_bt_config);
struct iwl_ht_config *ht_conf = &priv->current_ht_config;
struct ieee80211_sta *sta;
- IWL_DEBUG_MAC80211(priv, "enter: \n");
+ IWL_DEBUG_MAC80211(priv, "enter:\n");
if (!ht_conf->is_ht)
return;
iwlcore_commit_rxon(priv);
}
-#define IWL_DELAY_NEXT_SCAN_AFTER_ASSOC (HZ*6)
void iwl_bss_info_changed(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_bss_conf *bss_conf,
mutex_lock(&priv->mutex);
- if (changes & BSS_CHANGED_BEACON &&
- priv->iw_mode == NL80211_IFTYPE_AP) {
+ if (changes & BSS_CHANGED_BEACON && vif->type == NL80211_IFTYPE_AP) {
dev_kfree_skb(priv->ibss_beacon);
priv->ibss_beacon = ieee80211_beacon_get(hw, vif);
}
}
/* mac80211 only sets assoc when in STATION mode */
- if (priv->iw_mode == NL80211_IFTYPE_ADHOC ||
- bss_conf->assoc) {
+ if (vif->type == NL80211_IFTYPE_ADHOC || bss_conf->assoc) {
memcpy(priv->staging_rxon.bssid_addr,
bss_conf->bssid, ETH_ALEN);
* mac80211 decides to do both changes at once because
* it will invoke post_associate.
*/
- if (priv->iw_mode == NL80211_IFTYPE_ADHOC &&
+ if (vif->type == NL80211_IFTYPE_ADHOC &&
changes & BSS_CHANGED_BEACON) {
struct sk_buff *beacon = ieee80211_beacon_get(hw, vif);
iwl_led_associate(priv);
- /*
- * We have just associated, don't start scan too early
- * leave time for EAPOL exchange to complete.
- *
- * XXX: do this in mac80211
- */
- priv->next_scan_jiffies = jiffies +
- IWL_DELAY_NEXT_SCAN_AFTER_ASSOC;
if (!iwl_is_rfkill(priv))
priv->cfg->ops->lib->post_associate(priv);
} else
/**
* iwl_mac_config - mac80211 config callback
- *
- * We ignore conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME since it seems to
- * be set inappropriately and the driver currently sets the hardware up to
- * use it whenever needed.
*/
int iwl_mac_config(struct ieee80211_hw *hw, u32 changed)
{
sizeof(struct iwl_tx_queue) * priv->cfg->num_of_queues,
GFP_KERNEL);
if (!priv->txq) {
- IWL_ERR(priv, "Not enough memory for txq \n");
+ IWL_ERR(priv, "Not enough memory for txq\n");
return -ENOMEM;
}
return 0;
}
EXPORT_SYMBOL(iwl_free_txq_mem);
-int iwl_send_wimax_coex(struct iwl_priv *priv)
-{
- struct iwl_wimax_coex_cmd uninitialized_var(coex_cmd);
-
- if (priv->cfg->support_wimax_coexist) {
- /* UnMask wake up src at associated sleep */
- coex_cmd.flags |= COEX_FLAGS_ASSOC_WA_UNMASK_MSK;
-
- /* UnMask wake up src at unassociated sleep */
- coex_cmd.flags |= COEX_FLAGS_UNASSOC_WA_UNMASK_MSK;
- memcpy(coex_cmd.sta_prio, cu_priorities,
- sizeof(struct iwl_wimax_coex_event_entry) *
- COEX_NUM_OF_EVENTS);
-
- /* enabling the coexistence feature */
- coex_cmd.flags |= COEX_FLAGS_COEX_ENABLE_MSK;
-
- /* enabling the priorities tables */
- coex_cmd.flags |= COEX_FLAGS_STA_TABLE_VALID_MSK;
- } else {
- /* coexistence is disabled */
- memset(&coex_cmd, 0, sizeof(coex_cmd));
- }
- return iwl_send_cmd_pdu(priv, COEX_PRIORITY_TABLE_CMD,
- sizeof(coex_cmd), &coex_cmd);
-}
-EXPORT_SYMBOL(iwl_send_wimax_coex);
-
#ifdef CONFIG_IWLWIFI_DEBUGFS
#define IWL_TRAFFIC_DUMP_SIZE (IWL_TRAFFIC_ENTRY_SIZE * IWL_TRAFFIC_ENTRIES)
*/
IWL_DEBUG_INFO(priv, "perform radio reset.\n");
iwl_internal_short_hw_scan(priv);
- return;
}
struct iwl_priv *priv = pci_get_drvdata(pdev);
int ret;
+ /*
+ * We disable the RETRY_TIMEOUT register (0x41) to keep
+ * PCI Tx retries from interfering with C3 CPU state.
+ */
+ pci_write_config_byte(pdev, PCI_CFG_RETRY_TIMEOUT, 0x00);
+
pci_set_power_state(pdev, PCI_D0);
ret = pci_enable_device(pdev);
if (ret)
projects / karo-tx-linux.git / blobdiff