memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon));
}
- iwlcore_clear_stations_table(priv);
+ iwl_clear_stations_table(priv);
if (!priv->error_recovering)
priv->start_calib = 0;
/* If we have set the ASSOC_MSK and we are in BSS mode then
* add the IWL_AP_ID to the station rate table */
- if (new_assoc && (priv->iw_mode == IEEE80211_IF_TYPE_STA)) {
- if (iwl_rxon_add_station(priv, priv->active_rxon.bssid_addr, 1)
- == IWL_INVALID_STATION) {
- IWL_ERROR("Error adding AP address for transmit.\n");
- return -EIO;
+ if (new_assoc) {
+ if (priv->iw_mode == IEEE80211_IF_TYPE_STA) {
+ ret = iwl_rxon_add_station(priv,
+ priv->active_rxon.bssid_addr, 1);
+ if (ret == IWL_INVALID_STATION) {
+ IWL_ERROR("Error adding AP address for TX.\n");
+ return -EIO;
+ }
+ priv->assoc_station_added = 1;
+ if (priv->default_wep_key &&
+ iwl_send_static_wepkey_cmd(priv, 0))
+ IWL_ERROR("Could not send WEP static key.\n");
}
- priv->assoc_station_added = 1;
- if (priv->default_wep_key &&
- iwl_send_static_wepkey_cmd(priv, 0))
- IWL_ERROR("Could not send WEP static key.\n");
/* Apply the new configuration
* RXON assoc doesn't clear the station table in uCode,
}
}
-int iwl4965_is_network_packet(struct iwl_priv *priv, struct ieee80211_hdr *header)
-{
- /* Filter incoming packets to determine if they are targeted toward
- * this network, discarding packets coming from ourselves */
- switch (priv->iw_mode) {
- case IEEE80211_IF_TYPE_IBSS: /* Header: Dest. | Source | BSSID */
- /* packets from our adapter are dropped (echo) */
- if (!compare_ether_addr(header->addr2, priv->mac_addr))
- return 0;
- /* {broad,multi}cast packets to our IBSS go through */
- if (is_multicast_ether_addr(header->addr1))
- return !compare_ether_addr(header->addr3, priv->bssid);
- /* packets to our adapter go through */
- return !compare_ether_addr(header->addr1, priv->mac_addr);
- case IEEE80211_IF_TYPE_STA: /* Header: Dest. | AP{BSSID} | Source */
- /* packets from our adapter are dropped (echo) */
- if (!compare_ether_addr(header->addr3, priv->mac_addr))
- return 0;
- /* {broad,multi}cast packets to our BSS go through */
- if (is_multicast_ether_addr(header->addr1))
- return !compare_ether_addr(header->addr2, priv->bssid);
- /* packets to our adapter go through */
- return !compare_ether_addr(header->addr1, priv->mac_addr);
- default:
- break;
- }
-
- return 1;
-}
-
-static void iwl4965_sequence_reset(struct iwl_priv *priv)
-{
- /* Reset ieee stats */
-
- /* We don't reset the net_device_stats (ieee->stats) on
- * re-association */
-
- priv->last_seq_num = -1;
- priv->last_frag_num = -1;
- priv->last_packet_time = 0;
-
- iwl_scan_cancel(priv);
-}
-
#define MAX_UCODE_BEACON_INTERVAL 4096
#define INTEL_CONN_LISTEN_INTERVAL __constant_cpu_to_le16(0xA)
#endif
ch_info = iwl_get_channel_info(priv, priv->band,
- le16_to_cpu(priv->staging_rxon.channel));
+ le16_to_cpu(priv->active_rxon.channel));
if (!ch_info)
ch_info = &priv->channel_info[0];
{
priv->iw_mode = mode;
- /* init channel/phymode to values given at driver init */
- iwl_set_rxon_channel(priv, IEEE80211_BAND_2GHZ, 6);
-
iwl4965_connection_init_rx_config(priv);
memcpy(priv->staging_rxon.node_addr, priv->mac_addr, ETH_ALEN);
- iwlcore_clear_stations_table(priv);
+ iwl_clear_stations_table(priv);
/* dont commit rxon if rf-kill is on*/
if (!iwl_is_ready_rf(priv))
(IWL_OFDM_BASIC_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF;
}
-#define IWL_PACKET_RETRY_TIME HZ
-
-int iwl4965_is_duplicate_packet(struct iwl_priv *priv, struct ieee80211_hdr *header)
-{
- u16 sc = le16_to_cpu(header->seq_ctrl);
- u16 seq = (sc & IEEE80211_SCTL_SEQ) >> 4;
- u16 frag = sc & IEEE80211_SCTL_FRAG;
- u16 *last_seq, *last_frag;
- unsigned long *last_time;
-
- switch (priv->iw_mode) {
- case IEEE80211_IF_TYPE_IBSS:{
- struct list_head *p;
- struct iwl4965_ibss_seq *entry = NULL;
- u8 *mac = header->addr2;
- int index = mac[5] & (IWL_IBSS_MAC_HASH_SIZE - 1);
-
- __list_for_each(p, &priv->ibss_mac_hash[index]) {
- entry = list_entry(p, struct iwl4965_ibss_seq, list);
- if (!compare_ether_addr(entry->mac, mac))
- break;
- }
- if (p == &priv->ibss_mac_hash[index]) {
- entry = kzalloc(sizeof(*entry), GFP_ATOMIC);
- if (!entry) {
- IWL_ERROR("Cannot malloc new mac entry\n");
- return 0;
- }
- memcpy(entry->mac, mac, ETH_ALEN);
- entry->seq_num = seq;
- entry->frag_num = frag;
- entry->packet_time = jiffies;
- list_add(&entry->list, &priv->ibss_mac_hash[index]);
- return 0;
- }
- last_seq = &entry->seq_num;
- last_frag = &entry->frag_num;
- last_time = &entry->packet_time;
- break;
- }
- case IEEE80211_IF_TYPE_STA:
- last_seq = &priv->last_seq_num;
- last_frag = &priv->last_frag_num;
- last_time = &priv->last_packet_time;
- break;
- default:
- return 0;
- }
- if ((*last_seq == seq) &&
- time_after(*last_time + IWL_PACKET_RETRY_TIME, jiffies)) {
- if (*last_frag == frag)
- goto drop;
- if (*last_frag + 1 != frag)
- /* out-of-order fragment */
- goto drop;
- } else
- *last_seq = seq;
-
- *last_frag = frag;
- *last_time = jiffies;
- return 0;
-
- drop:
- return 1;
-}
-
#ifdef CONFIG_IWL4965_SPECTRUM_MEASUREMENT
#include "iwl-spectrum.h"
wake_up_interruptible(&priv->wait_command_queue);
}
-/* Cache phy data (Rx signal strength, etc) for HT frame (REPLY_RX_PHY_CMD).
- * This will be used later in iwl4965_rx_reply_rx() for REPLY_RX_MPDU_CMD. */
-static void iwl4965_rx_reply_rx_phy(struct iwl_priv *priv,
- struct iwl_rx_mem_buffer *rxb)
-{
- struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
- priv->last_phy_res[0] = 1;
- memcpy(&priv->last_phy_res[1], &(pkt->u.raw[0]),
- sizeof(struct iwl4965_rx_phy_res));
-}
-
/**
* iwl4965_setup_rx_handlers - Initialize Rx handler callbacks
*
* This function chains into the hardware specific files for them to setup
* any hardware specific handlers as well.
*/
-static void iwl4965_setup_rx_handlers(struct iwl_priv *priv)
+static void iwl_setup_rx_handlers(struct iwl_priv *priv)
{
priv->rx_handlers[REPLY_ALIVE] = iwl_rx_reply_alive;
priv->rx_handlers[REPLY_ERROR] = iwl4965_rx_reply_error;
priv->rx_handlers[MISSED_BEACONS_NOTIFICATION] =
iwl_rx_missed_beacon_notif;
/* Rx handlers */
- priv->rx_handlers[REPLY_RX_PHY_CMD] = iwl4965_rx_reply_rx_phy;
- priv->rx_handlers[REPLY_RX_MPDU_CMD] = iwl4965_rx_reply_rx;
+ priv->rx_handlers[REPLY_RX_PHY_CMD] = iwl_rx_reply_rx_phy;
+ priv->rx_handlers[REPLY_RX_MPDU_CMD] = iwl_rx_reply_rx;
+ /* block ack */
+ priv->rx_handlers[REPLY_COMPRESSED_BA] = iwl_rx_reply_compressed_ba;
/* Set up hardware specific Rx handlers */
priv->cfg->ops->lib->rx_handler_setup(priv);
}
iwl_rx_queue_restock(priv);
}
-#define PERFECT_RSSI (-20) /* dBm */
-#define WORST_RSSI (-95) /* dBm */
-#define RSSI_RANGE (PERFECT_RSSI - WORST_RSSI)
-
-/* Calculate an indication of rx signal quality (a percentage, not dBm!).
- * See http://www.ces.clemson.edu/linux/signal_quality.shtml for info
- * about formulas used below. */
-int iwl4965_calc_sig_qual(int rssi_dbm, int noise_dbm)
-{
- int sig_qual;
- int degradation = PERFECT_RSSI - rssi_dbm;
-
- /* If we get a noise measurement, use signal-to-noise ratio (SNR)
- * as indicator; formula is (signal dbm - noise dbm).
- * SNR at or above 40 is a great signal (100%).
- * Below that, scale to fit SNR of 0 - 40 dB within 0 - 100% indicator.
- * Weakest usable signal is usually 10 - 15 dB SNR. */
- if (noise_dbm) {
- if (rssi_dbm - noise_dbm >= 40)
- return 100;
- else if (rssi_dbm < noise_dbm)
- return 0;
- sig_qual = ((rssi_dbm - noise_dbm) * 5) / 2;
-
- /* Else use just the signal level.
- * This formula is a least squares fit of data points collected and
- * compared with a reference system that had a percentage (%) display
- * for signal quality. */
- } else
- sig_qual = (100 * (RSSI_RANGE * RSSI_RANGE) - degradation *
- (15 * RSSI_RANGE + 62 * degradation)) /
- (RSSI_RANGE * RSSI_RANGE);
-
- if (sig_qual > 100)
- sig_qual = 100;
- else if (sig_qual < 1)
- sig_qual = 0;
-
- return sig_qual;
-}
-
#ifdef CONFIG_IWLWIFI_DEBUG
static void iwl4965_print_rx_config_cmd(struct iwl_priv *priv)
{
IWL_DEBUG(IWL_DL_RF_KILL, "RF_KILL bit toggled to %s.\n",
hw_rf_kill ? "disable radio":"enable radio");
- /* Queue restart only if RF_KILL switch was set to "kill"
- * when we loaded driver, and is now set to "enable".
- * After we're Alive, RF_KILL gets handled by
- * iwl4965_rx_card_state_notif() */
- if (!hw_rf_kill && !test_bit(STATUS_ALIVE, &priv->status)) {
+ /* driver only loads ucode once setting the interface up.
+ * the driver as well won't allow loading if RFKILL is set
+ * therefore no need to restart the driver from this handler
+ */
+ if (!hw_rf_kill && !test_bit(STATUS_ALIVE, &priv->status))
clear_bit(STATUS_RF_KILL_HW, &priv->status);
- queue_work(priv->workqueue, &priv->restart);
- }
handled |= CSR_INT_BIT_RF_KILL;
}
goto restart;
}
- iwlcore_clear_stations_table(priv);
+ iwl_clear_stations_table(priv);
ret = priv->cfg->ops->lib->alive_notify(priv);
if (ret) {
IWL_WARNING("Could not complete ALIVE transition [ntf]: %d\n",
iwl_leds_unregister(priv);
- iwlcore_clear_stations_table(priv);
+ iwl_clear_stations_table(priv);
/* Unblock any waiting calls */
wake_up_interruptible_all(&priv->wait_command_queue);
test_bit(STATUS_GEO_CONFIGURED, &priv->status) <<
STATUS_GEO_CONFIGURED |
test_bit(STATUS_IN_SUSPEND, &priv->status) <<
- STATUS_IN_SUSPEND;
+ STATUS_IN_SUSPEND |
+ test_bit(STATUS_EXIT_PENDING, &priv->status) <<
+ STATUS_EXIT_PENDING;
goto exit;
}
test_bit(STATUS_IN_SUSPEND, &priv->status) <<
STATUS_IN_SUSPEND |
test_bit(STATUS_FW_ERROR, &priv->status) <<
- STATUS_FW_ERROR;
+ STATUS_FW_ERROR |
+ test_bit(STATUS_EXIT_PENDING, &priv->status) <<
+ STATUS_EXIT_PENDING;
spin_lock_irqsave(&priv->lock, flags);
iwl_clear_bit(priv, CSR_GP_CNTRL,
if (iwl_read32(priv, CSR_GP_CNTRL) &
CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
clear_bit(STATUS_RF_KILL_HW, &priv->status);
- else {
+ else
set_bit(STATUS_RF_KILL_HW, &priv->status);
- if (!test_bit(STATUS_IN_SUSPEND, &priv->status)) {
- iwl_rfkill_set_hw_state(priv);
- IWL_WARNING("Radio disabled by HW RF Kill switch\n");
- return -ENODEV;
- }
+
+ if (!test_bit(STATUS_IN_SUSPEND, &priv->status) &&
+ iwl_is_rfkill(priv)) {
+ IWL_WARNING("Radio disabled by %s RF Kill switch\n",
+ test_bit(STATUS_RF_KILL_HW, &priv->status) ? "HW" : "SW");
+ return -ENODEV;
}
- iwl_rfkill_set_hw_state(priv);
iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
ret = priv->cfg->ops->lib->alloc_shared_mem(priv);
for (i = 0; i < MAX_HW_RESTARTS; i++) {
- iwlcore_clear_stations_table(priv);
+ iwl_clear_stations_table(priv);
/* load bootstrap state machine,
* load bootstrap program into processor's memory,
"Kill switch must be turned off for "
"wireless networking to work.\n");
}
- iwl_rfkill_set_hw_state(priv);
-
mutex_unlock(&priv->mutex);
+ iwl_rfkill_set_hw_state(priv);
}
static void iwl4965_bg_set_monitor(struct work_struct *work)
mutex_lock(&priv->mutex);
__iwl4965_up(priv);
mutex_unlock(&priv->mutex);
+ iwl_rfkill_set_hw_state(priv);
}
static void iwl4965_bg_restart(struct work_struct *data)
switch (priv->iw_mode) {
case IEEE80211_IF_TYPE_STA:
- iwl4965_rate_scale_init(priv->hw, IWL_AP_ID);
break;
case IEEE80211_IF_TYPE_IBSS:
priv->assoc_id = 1;
iwl_rxon_add_station(priv, priv->bssid, 0);
- iwl4965_rate_scale_init(priv->hw, IWL_STA_ID);
iwl4965_send_beacon_cmd(priv);
break;
break;
}
- iwl4965_sequence_reset(priv);
-
/* Enable Rx differential gain and sensitivity calibrations */
iwl_chain_noise_reset(priv);
priv->start_calib = 1;
*
*****************************************************************************/
-#define UCODE_READY_TIMEOUT (2 * HZ)
+#define UCODE_READY_TIMEOUT (4 * HZ)
static int iwl4965_mac_start(struct ieee80211_hw *hw)
{
mutex_unlock(&priv->mutex);
+ iwl_rfkill_set_hw_state(priv);
+
if (ret)
goto out_release_irq;
/* Wait for START_ALIVE from Run Time ucode. Otherwise callbacks from
* mac80211 will not be run successfully. */
- if (priv->ucode_type == UCODE_RT) {
- ret = wait_event_interruptible_timeout(priv->wait_command_queue,
- test_bit(STATUS_READY, &priv->status),
- UCODE_READY_TIMEOUT);
- if (!ret) {
- if (!test_bit(STATUS_READY, &priv->status)) {
- IWL_ERROR("START_ALIVE timeout after %dms.\n",
- jiffies_to_msecs(UCODE_READY_TIMEOUT));
- ret = -ETIMEDOUT;
- goto out_release_irq;
- }
+ ret = wait_event_interruptible_timeout(priv->wait_command_queue,
+ test_bit(STATUS_READY, &priv->status),
+ UCODE_READY_TIMEOUT);
+ if (!ret) {
+ if (!test_bit(STATUS_READY, &priv->status)) {
+ IWL_ERROR("START_ALIVE timeout after %dms.\n",
+ jiffies_to_msecs(UCODE_READY_TIMEOUT));
+ ret = -ETIMEDOUT;
+ goto out_release_irq;
}
-
- priv->is_open = 1;
}
+
+ priv->is_open = 1;
IWL_DEBUG_MAC80211("leave\n");
return 0;
if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) {
IWL_DEBUG_MAC80211("leave - monitor\n");
- return -1;
+ dev_kfree_skb_any(skb);
+ return 0;
}
IWL_DEBUG_TX("dev->xmit(%d bytes) at rate 0x%02x\n", skb->len,
* clear sta table, add BCAST sta... */
}
+/* temporary */
+static int iwl4965_mac_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb);
+
static int iwl4965_mac_config_interface(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_if_conf *conf)
return 0;
}
+ if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS &&
+ conf->changed & IEEE80211_IFCC_BEACON) {
+ struct sk_buff *beacon = ieee80211_beacon_get(hw, vif);
+ if (!beacon)
+ return -ENOMEM;
+ rc = iwl4965_mac_beacon_update(hw, beacon);
+ if (rc)
+ return rc;
+ }
+
if ((priv->iw_mode == IEEE80211_IF_TYPE_AP) &&
- (!conf->beacon || !conf->ssid_len)) {
+ (!conf->ssid_len)) {
IWL_DEBUG_MAC80211
("Leaving in AP mode because HostAPD is not ready.\n");
return 0;
if (priv->ibss_beacon)
dev_kfree_skb(priv->ibss_beacon);
- priv->ibss_beacon = conf->beacon;
+ priv->ibss_beacon = ieee80211_beacon_get(hw, vif);
}
if (iwl_is_rfkill(priv))
unsigned int *total_flags,
int mc_count, struct dev_addr_list *mc_list)
{
- /*
- * XXX: dummy
- * see also iwl4965_connection_init_rx_config
- */
struct iwl_priv *priv = hw->priv;
- int new_flags = 0;
- if (changed_flags & (FIF_PROMISC_IN_BSS | FIF_OTHER_BSS)) {
- if (*total_flags & (FIF_PROMISC_IN_BSS | FIF_OTHER_BSS)) {
- IWL_DEBUG_MAC80211("Enter: type %d (0x%x, 0x%x)\n",
- IEEE80211_IF_TYPE_MNTR,
- changed_flags, *total_flags);
- /* queue work 'cuz mac80211 is holding a lock which
- * prevents us from issuing (synchronous) f/w cmds */
- queue_work(priv->workqueue, &priv->set_monitor);
- new_flags &= FIF_PROMISC_IN_BSS |
- FIF_OTHER_BSS |
- FIF_ALLMULTI;
- }
+
+ if (changed_flags & (*total_flags) & FIF_OTHER_BSS) {
+ IWL_DEBUG_MAC80211("Enter: type %d (0x%x, 0x%x)\n",
+ IEEE80211_IF_TYPE_MNTR,
+ changed_flags, *total_flags);
+ /* queue work 'cuz mac80211 is holding a lock which
+ * prevents us from issuing (synchronous) f/w cmds */
+ queue_work(priv->workqueue, &priv->set_monitor);
}
- *total_flags = new_flags;
+ *total_flags &= FIF_OTHER_BSS | FIF_ALLMULTI |
+ FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL;
}
static void iwl4965_mac_remove_interface(struct ieee80211_hw *hw,
return 0;
}
-static u64 iwl4965_mac_get_tsf(struct ieee80211_hw *hw)
-{
- struct iwl_priv *priv;
-
- priv = hw->priv;
- IWL_DEBUG_MAC80211("enter\n");
- IWL_DEBUG_MAC80211("leave\n");
-
- return 0;
-}
-
static void iwl4965_mac_reset_tsf(struct ieee80211_hw *hw)
{
struct iwl_priv *priv = hw->priv;
mutex_lock(&priv->mutex);
IWL_DEBUG_MAC80211("enter\n");
- priv->lq_mngr.lq_ready = 0;
spin_lock_irqsave(&priv->lock, flags);
memset(&priv->current_ht_config, 0, sizeof(struct iwl_ht_info));
spin_unlock_irqrestore(&priv->lock, flags);
{
struct iwl_priv *priv = hw->priv;
unsigned long flags;
+ __le64 timestamp;
mutex_lock(&priv->mutex);
IWL_DEBUG_MAC80211("enter\n");
priv->ibss_beacon = skb;
priv->assoc_id = 0;
+ timestamp = ((struct ieee80211_mgmt *)skb->data)->u.beacon.timestamp;
+ priv->timestamp = le64_to_cpu(timestamp) + (priv->beacon_int * 1000);
IWL_DEBUG_MAC80211("leave\n");
spin_unlock_irqrestore(&priv->lock, flags);
.get_stats = iwl4965_mac_get_stats,
.get_tx_stats = iwl4965_mac_get_tx_stats,
.conf_tx = iwl4965_mac_conf_tx,
- .get_tsf = iwl4965_mac_get_tsf,
.reset_tsf = iwl4965_mac_reset_tsf,
- .beacon_update = iwl4965_mac_beacon_update,
.bss_info_changed = iwl4965_bss_info_changed,
.ampdu_action = iwl4965_mac_ampdu_action,
.hw_scan = iwl4965_mac_hw_scan
/************************
* 5. Setup HW constants
************************/
- /* Device-specific setup */
- if (priv->cfg->ops->lib->set_hw_params(priv)) {
+ if (iwl_set_hw_params(priv)) {
IWL_ERROR("failed to set hw parameters\n");
goto out_free_eeprom;
}
iwl_setup_deferred_work(priv);
- iwl4965_setup_rx_handlers(priv);
+ iwl_setup_rx_handlers(priv);
/********************
* 9. Conclude
static void __devexit iwl4965_pci_remove(struct pci_dev *pdev)
{
struct iwl_priv *priv = pci_get_drvdata(pdev);
- struct list_head *p, *q;
- int i;
unsigned long flags;
if (!priv)
iwl_synchronize_irq(priv);
- /* Free MAC hash list for ADHOC */
- for (i = 0; i < IWL_IBSS_MAC_HASH_SIZE; i++) {
- list_for_each_safe(p, q, &priv->ibss_mac_hash[i]) {
- list_del(p);
- kfree(list_entry(p, struct iwl4965_ibss_seq, list));
- }
- }
-
iwl_rfkill_unregister(priv);
iwl4965_dealloc_ucode_pci(priv);
iwl_rx_queue_free(priv, &priv->rxq);
iwl_hw_txq_ctx_free(priv);
- iwlcore_clear_stations_table(priv);
+ iwl_clear_stations_table(priv);
iwl_eeprom_free(priv);
{IWL_PCI_DEVICE(0x4229, PCI_ANY_ID, iwl4965_agn_cfg)},
{IWL_PCI_DEVICE(0x4230, PCI_ANY_ID, iwl4965_agn_cfg)},
#ifdef CONFIG_IWL5000
- {IWL_PCI_DEVICE(0x4235, PCI_ANY_ID, iwl5300_agn_cfg)},
+ {IWL_PCI_DEVICE(0x4232, 0x1205, iwl5100_bg_cfg)},
+ {IWL_PCI_DEVICE(0x4232, 0x1305, iwl5100_bg_cfg)},
+ {IWL_PCI_DEVICE(0x4232, 0x1206, iwl5100_abg_cfg)},
+ {IWL_PCI_DEVICE(0x4232, 0x1306, iwl5100_abg_cfg)},
+ {IWL_PCI_DEVICE(0x4232, 0x1326, iwl5100_abg_cfg)},
+ {IWL_PCI_DEVICE(0x4237, 0x1216, iwl5100_abg_cfg)},
{IWL_PCI_DEVICE(0x4232, PCI_ANY_ID, iwl5100_agn_cfg)},
+ {IWL_PCI_DEVICE(0x4235, PCI_ANY_ID, iwl5300_agn_cfg)},
+ {IWL_PCI_DEVICE(0x4236, PCI_ANY_ID, iwl5300_agn_cfg)},
+ {IWL_PCI_DEVICE(0x4237, PCI_ANY_ID, iwl5100_agn_cfg)},
{IWL_PCI_DEVICE(0x423A, PCI_ANY_ID, iwl5350_agn_cfg)},
#endif /* CONFIG_IWL5000 */
{0}