Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...

[mv-sheeva.git] / drivers / net / wireless / rt2x00 / rt2800.h

diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
index 0b17934cf6a98ea3e9ac0347a348010cd8d9d50b..317b7807175e16713c63b5bf6c87e468e2231e00 100644 (file)
--- a/drivers/net/wireless/rt2x00/rt2800.h
+++ b/drivers/net/wireless/rt2x00/rt2800.h
@@ -63,7 +63,6 @@
  */
 #define REV_RT2860C                    0x0100
 #define REV_RT2860D                    0x0101
-#define REV_RT2870D                    0x0101
 #define REV_RT2872E                    0x0200
 #define REV_RT3070E                    0x0200
 #define REV_RT3070F                    0x0201
@@ -98,6 +97,21 @@
  * Registers.
  */
 
+/*
+ * E2PROM_CSR: PCI EEPROM control register.
+ * RELOAD: Write 1 to reload eeprom content.
+ * TYPE: 0: 93c46, 1:93c66.
+ * LOAD_STATUS: 1:loading, 0:done.
+ */
+#define E2PROM_CSR                     0x0004
+#define E2PROM_CSR_DATA_CLOCK          FIELD32(0x00000001)
+#define E2PROM_CSR_CHIP_SELECT         FIELD32(0x00000002)
+#define E2PROM_CSR_DATA_IN             FIELD32(0x00000004)
+#define E2PROM_CSR_DATA_OUT            FIELD32(0x00000008)
+#define E2PROM_CSR_TYPE                        FIELD32(0x00000030)
+#define E2PROM_CSR_LOAD_STATUS         FIELD32(0x00000040)
+#define E2PROM_CSR_RELOAD              FIELD32(0x00000080)
+
 /*
  * OPT_14: Unknown register used by rt3xxx devices.
  */
@@ -321,6 +335,39 @@
 #define RX_CRX_IDX                     0x0298
 #define RX_DRX_IDX                     0x029c
 
+/*
+ * USB_DMA_CFG
+ * RX_BULK_AGG_TIMEOUT: Rx Bulk Aggregation TimeOut in unit of 33ns.
+ * RX_BULK_AGG_LIMIT: Rx Bulk Aggregation Limit in unit of 256 bytes.
+ * PHY_CLEAR: phy watch dog enable.
+ * TX_CLEAR: Clear USB DMA TX path.
+ * TXOP_HALT: Halt TXOP count down when TX buffer is full.
+ * RX_BULK_AGG_EN: Enable Rx Bulk Aggregation.
+ * RX_BULK_EN: Enable USB DMA Rx.
+ * TX_BULK_EN: Enable USB DMA Tx.
+ * EP_OUT_VALID: OUT endpoint data valid.
+ * RX_BUSY: USB DMA RX FSM busy.
+ * TX_BUSY: USB DMA TX FSM busy.
+ */
+#define USB_DMA_CFG                    0x02a0
+#define USB_DMA_CFG_RX_BULK_AGG_TIMEOUT        FIELD32(0x000000ff)
+#define USB_DMA_CFG_RX_BULK_AGG_LIMIT  FIELD32(0x0000ff00)
+#define USB_DMA_CFG_PHY_CLEAR          FIELD32(0x00010000)
+#define USB_DMA_CFG_TX_CLEAR           FIELD32(0x00080000)
+#define USB_DMA_CFG_TXOP_HALT          FIELD32(0x00100000)
+#define USB_DMA_CFG_RX_BULK_AGG_EN     FIELD32(0x00200000)
+#define USB_DMA_CFG_RX_BULK_EN         FIELD32(0x00400000)
+#define USB_DMA_CFG_TX_BULK_EN         FIELD32(0x00800000)
+#define USB_DMA_CFG_EP_OUT_VALID       FIELD32(0x3f000000)
+#define USB_DMA_CFG_RX_BUSY            FIELD32(0x40000000)
+#define USB_DMA_CFG_TX_BUSY            FIELD32(0x80000000)
+
+/*
+ * US_CYC_CNT
+ */
+#define US_CYC_CNT                     0x02a4
+#define US_CYC_CNT_CLOCK_CYCLE         FIELD32(0x000000ff)
+
 /*
  * PBF_SYS_CTRL
  * HOST_RAM_WRITE: enable Host program ram write selection