#define CONF_TX_MAX_RATE_CLASSES 8
#define CONF_TX_RATE_MASK_UNSPECIFIED 0
-#define CONF_TX_RATE_MASK_ALL 0x1eff
+#define CONF_TX_RATE_MASK_BASIC (CONF_HW_BIT_RATE_1MBPS | \
+ CONF_HW_BIT_RATE_2MBPS)
#define CONF_TX_RATE_RETRY_LIMIT 10
struct conf_tx_rate_class {
u8 psm_entry_retries;
};
-#define CONF_SR_ERR_TBL_MAX_VALUES 14
-
-struct conf_mart_reflex_err_table {
- /*
- * Length of the error table values table.
- *
- * Range: 0 - CONF_SR_ERR_TBL_MAX_VALUES
- */
- u8 len;
-
- /*
- * Smart Reflex error table upper limit.
- *
- * Range: s8
- */
- s8 upper_limit;
-
- /*
- * Smart Reflex error table values.
- *
- * Range: s8
- */
- s8 values[CONF_SR_ERR_TBL_MAX_VALUES];
-};
-
enum {
CONF_REF_CLK_19_2_E,
CONF_REF_CLK_26_E,
CONF_DUAL_BAND
};
-struct conf_general_parms {
- /*
- * RF Reference Clock type / speed
- *
- * Range: CONF_REF_CLK_*
- */
- u8 ref_clk;
-
- /*
- * Settling time of the reference clock after boot.
- *
- * Range: u8
- */
- u8 settling_time;
-
- /*
- * Flag defining whether clock is valid on wakeup.
- *
- * Range: 0 - not valid on wakeup, 1 - valid on wakeup
- */
- u8 clk_valid_on_wakeup;
-
- /*
- * DC-to-DC mode.
- *
- * Range: Unknown
- */
- u8 dc2dcmode;
-
- /*
- * Flag defining whether used as single or dual-band.
- *
- * Range: CONF_SINGLE_BAND, CONF_DUAL_BAND
- */
- u8 single_dual_band;
-
- /*
- * TX bip fem autodetect flag.
- *
- * Range: Unknown
- */
- u8 tx_bip_fem_autodetect;
-
- /*
- * TX bip gem manufacturer.
- *
- * Range: Unknown
- */
- u8 tx_bip_fem_manufacturer;
-
- /*
- * Settings flags.
- *
- * Range: Unknown
- */
- u8 settings;
-};
-
#define CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE 15
#define CONF_NUMBER_OF_SUB_BANDS_5 7
#define CONF_NUMBER_OF_RATE_GROUPS 6
struct conf_radio_parms {
/*
- * Static radio parameters for 2.4GHz
- *
- * Range: unknown
- */
- u8 rx_trace_loss;
- u8 tx_trace_loss;
- s8 rx_rssi_and_proc_compens[CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE];
-
- /*
- * Static radio parameters for 5GHz
- *
- * Range: unknown
- */
- u8 rx_trace_loss_5[CONF_NUMBER_OF_SUB_BANDS_5];
- u8 tx_trace_loss_5[CONF_NUMBER_OF_SUB_BANDS_5];
- s8 rx_rssi_and_proc_compens_5[CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE];
-
- /*
- * Dynamic radio parameters for 2.4GHz
+ * FEM parameter set to use
*
- * Range: unknown
+ * Range: 0 or 1
*/
- s16 tx_ref_pd_voltage;
- s8 tx_ref_power;
- s8 tx_offset_db;
-
- s8 tx_rate_limits_normal[CONF_NUMBER_OF_RATE_GROUPS];
- s8 tx_rate_limits_degraded[CONF_NUMBER_OF_RATE_GROUPS];
-
- s8 tx_channel_limits_11b[CONF_NUMBER_OF_CHANNELS_2_4];
- s8 tx_channel_limits_ofdm[CONF_NUMBER_OF_CHANNELS_2_4];
- s8 tx_pdv_rate_offsets[CONF_NUMBER_OF_RATE_GROUPS];
-
- u8 tx_ibias[CONF_NUMBER_OF_RATE_GROUPS];
- u8 rx_fem_insertion_loss;
+ u8 fem;
+};
+struct conf_init_settings {
/*
- * Dynamic radio parameters for 5GHz
- *
- * Range: unknown
+ * Configure radio parameters.
*/
- s16 tx_ref_pd_voltage_5[CONF_NUMBER_OF_SUB_BANDS_5];
- s8 tx_ref_power_5[CONF_NUMBER_OF_SUB_BANDS_5];
- s8 tx_offset_db_5[CONF_NUMBER_OF_SUB_BANDS_5];
-
- s8 tx_rate_limits_normal_5[CONF_NUMBER_OF_RATE_GROUPS];
- s8 tx_rate_limits_degraded_5[CONF_NUMBER_OF_RATE_GROUPS];
-
- s8 tx_channel_limits_ofdm_5[CONF_NUMBER_OF_CHANNELS_5];
- s8 tx_pdv_rate_offsets_5[CONF_NUMBER_OF_RATE_GROUPS];
+ struct conf_radio_parms radioparam;
- /* FIXME: this is inconsistent with the types for 2.4GHz */
- s8 tx_ibias_5[CONF_NUMBER_OF_RATE_GROUPS];
- s8 rx_fem_insertion_loss_5[CONF_NUMBER_OF_SUB_BANDS_5];
};
-#define CONF_SR_ERR_TBL_COUNT 3
+struct conf_itrim_settings {
+ /* enable dco itrim */
+ u8 enable;
-struct conf_init_settings {
- /*
- * Configure Smart Reflex error table values.
- */
- struct conf_mart_reflex_err_table sr_err_tbl[CONF_SR_ERR_TBL_COUNT];
+ /* moderation timeout in microsecs from the last TX */
+ u32 timeout;
+};
+struct conf_pm_config_settings {
/*
- * Smart Reflex enable flag.
+ * Host clock settling time
*
- * Range: 1 - Smart Reflex enabled, 0 - Smart Reflex disabled
- */
- u8 sr_enable;
-
- /*
- * Configure general parameters.
+ * Range: 0 - 30000 us
*/
- struct conf_general_parms genparam;
+ u32 host_clk_settling_time;
/*
- * Configure radio parameters.
+ * Host fast wakeup support
+ *
+ * Range: true, false
*/
- struct conf_radio_parms radioparam;
-
+ bool host_fast_wakeup_support;
};
struct conf_drv_settings {
struct conf_tx_settings tx;
struct conf_conn_settings conn;
struct conf_init_settings init;
+ struct conf_itrim_settings itrim;
+ struct conf_pm_config_settings pm_config;
};
#endif
projects / karo-tx-linux.git / blobdiff