static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_slot)
{
struct slot *slot;
+ struct pci_bus *bus = ctrl->pci_bus;
u8 reg;
u8 slot_power = readb(ctrl->hpc_reg + SLOT_POWER);
u16 reg16;
u32 leds = readl(ctrl->hpc_reg + LED_CONTROL);
- if (ctrl->speed == adapter_speed)
+ if (bus->cur_bus_speed == adapter_speed)
return 0;
/* We don't allow freq/mode changes if we find another adapter running
* lower speed/mode, we allow the new adapter to function at
* this rate if supported
*/
- if (ctrl->speed < adapter_speed)
+ if (bus->cur_bus_speed < adapter_speed)
return 0;
return 1;
/* If the controller doesn't support freq/mode changes and the
* controller is running at a higher mode, we bail
*/
- if ((ctrl->speed > adapter_speed) && (!ctrl->pcix_speed_capability))
+ if ((bus->cur_bus_speed > adapter_speed) && (!ctrl->pcix_speed_capability))
return 1;
/* But we allow the adapter to run at a lower rate if possible */
- if ((ctrl->speed < adapter_speed) && (!ctrl->pcix_speed_capability))
+ if ((bus->cur_bus_speed < adapter_speed) && (!ctrl->pcix_speed_capability))
return 0;
/* We try to set the max speed supported by both the adapter and
* controller
*/
- if (ctrl->speed_capability < adapter_speed) {
- if (ctrl->speed == ctrl->speed_capability)
+ if (bus->max_bus_speed < adapter_speed) {
+ if (bus->cur_bus_speed == bus->max_bus_speed)
return 0;
- adapter_speed = ctrl->speed_capability;
+ adapter_speed = bus->max_bus_speed;
}
writel(0x0L, ctrl->hpc_reg + LED_CONTROL);
pci_write_config_byte(ctrl->pci_dev, 0x43, reg);
/* Only if mode change...*/
- if (((ctrl->speed == PCI_SPEED_66MHz) && (adapter_speed == PCI_SPEED_66MHz_PCIX)) ||
- ((ctrl->speed == PCI_SPEED_66MHz_PCIX) && (adapter_speed == PCI_SPEED_66MHz)))
+ if (((bus->cur_bus_speed == PCI_SPEED_66MHz) && (adapter_speed == PCI_SPEED_66MHz_PCIX)) ||
+ ((bus->cur_bus_speed == PCI_SPEED_66MHz_PCIX) && (adapter_speed == PCI_SPEED_66MHz)))
set_SOGO(ctrl);
wait_for_ctrl_irq(ctrl);
set_SOGO(ctrl);
wait_for_ctrl_irq(ctrl);
- ctrl->speed = adapter_speed;
+ bus->cur_bus_speed = adapter_speed;
slot = cpqhp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
info("Successfully changed frequency/mode for adapter in slot %d\n",
*/
static u32 board_replaced(struct pci_func *func, struct controller *ctrl)
{
+ struct pci_bus *bus = ctrl->pci_bus;
u8 hp_slot;
u8 temp_byte;
u8 adapter_speed;
wait_for_ctrl_irq (ctrl);
adapter_speed = get_adapter_speed(ctrl, hp_slot);
- if (ctrl->speed != adapter_speed)
+ if (bus->cur_bus_speed != adapter_speed)
if (set_controller_speed(ctrl, adapter_speed, hp_slot))
rc = WRONG_BUS_FREQUENCY;
u32 temp_register = 0xFFFFFFFF;
u32 rc = 0;
struct pci_func *new_slot = NULL;
+ struct pci_bus *bus = ctrl->pci_bus;
struct slot *p_slot;
struct resource_lists res_lists;
wait_for_ctrl_irq (ctrl);
adapter_speed = get_adapter_speed(ctrl, hp_slot);
- if (ctrl->speed != adapter_speed)
+ if (bus->cur_bus_speed != adapter_speed)
if (set_controller_speed(ctrl, adapter_speed, hp_slot))
rc = WRONG_BUS_FREQUENCY;