int rc = 0;
dbg("%s: change to speed %d\n", __FUNCTION__, speed);
- down(&ctrl->crit_sect);
if ((rc = p_slot->hpc_ops->set_bus_speed_mode(p_slot, speed))) {
err("%s: Issue of set bus speed mode command failed\n", __FUNCTION__);
- up(&ctrl->crit_sect);
return WRONG_BUS_FREQUENCY;
}
-
- if ((rc = p_slot->hpc_ops->check_cmd_status(ctrl))) {
- err("%s: Can't set bus speed/mode in the case of adapter & bus mismatch\n",
- __FUNCTION__);
- err("%s: Error code (%d)\n", __FUNCTION__, rc);
- up(&ctrl->crit_sect);
- return WRONG_BUS_FREQUENCY;
- }
- up(&ctrl->crit_sect);
return rc;
}
__FUNCTION__, p_slot->device,
ctrl->slot_device_offset, hp_slot);
- /* Wait for exclusive access to hardware */
- down(&ctrl->crit_sect);
-
/* Power on slot without connecting to bus */
rc = p_slot->hpc_ops->power_on_slot(p_slot);
if (rc) {
err("%s: Failed to power on slot\n", __FUNCTION__);
- /* Done with exclusive hardware access */
- up(&ctrl->crit_sect);
return -1;
}
- rc = p_slot->hpc_ops->check_cmd_status(ctrl);
- if (rc) {
- err("%s: Failed to power on slot, error code(%d)\n", __FUNCTION__, rc);
- /* Done with exclusive hardware access */
- up(&ctrl->crit_sect);
- return -1;
- }
-
-
if ((ctrl->pci_dev->vendor == 0x8086) && (ctrl->pci_dev->device == 0x0332)) {
if (slots_not_empty)
return WRONG_BUS_FREQUENCY;
if ((rc = p_slot->hpc_ops->set_bus_speed_mode(p_slot, PCI_SPEED_33MHz))) {
err("%s: Issue of set bus speed mode command failed\n", __FUNCTION__);
- up(&ctrl->crit_sect);
return WRONG_BUS_FREQUENCY;
}
- if ((rc = p_slot->hpc_ops->check_cmd_status(ctrl))) {
- err("%s: Can't set bus speed/mode in the case of adapter & bus mismatch\n",
- __FUNCTION__);
- err("%s: Error code (%d)\n", __FUNCTION__, rc);
- up(&ctrl->crit_sect);
- return WRONG_BUS_FREQUENCY;
- }
/* turn on board, blink green LED, turn off Amber LED */
if ((rc = p_slot->hpc_ops->slot_enable(p_slot))) {
err("%s: Issue of Slot Enable command failed\n", __FUNCTION__);
- up(&ctrl->crit_sect);
return rc;
}
-
- if ((rc = p_slot->hpc_ops->check_cmd_status(ctrl))) {
- err("%s: Failed to enable slot, error code(%d)\n", __FUNCTION__, rc);
- up(&ctrl->crit_sect);
- return rc;
- }
}
rc = p_slot->hpc_ops->get_adapter_speed(p_slot, &adapter_speed);
if (rc || adapter_speed == PCI_SPEED_UNKNOWN) {
err("%s: Can't get adapter speed or bus mode mismatch\n", __FUNCTION__);
- /* Done with exclusive hardware access */
- up(&ctrl->crit_sect);
return WRONG_BUS_FREQUENCY;
}
rc = p_slot->hpc_ops->get_cur_bus_speed(p_slot, &bus_speed);
if (rc || bus_speed == PCI_SPEED_UNKNOWN) {
err("%s: Can't get bus operation speed\n", __FUNCTION__);
- /* Done with exclusive hardware access */
- up(&ctrl->crit_sect);
return WRONG_BUS_FREQUENCY;
}
max_bus_speed = bus_speed;
}
- /* Done with exclusive hardware access */
- up(&ctrl->crit_sect);
-
if ((rc = p_slot->hpc_ops->get_prog_int(p_slot, &pi))) {
err("%s: Can't get controller programming interface, set it to 1\n", __FUNCTION__);
pi = 1;
return rc;
}
- down(&ctrl->crit_sect);
/* turn on board, blink green LED, turn off Amber LED */
if ((rc = p_slot->hpc_ops->slot_enable(p_slot))) {
err("%s: Issue of Slot Enable command failed\n", __FUNCTION__);
- up(&ctrl->crit_sect);
return rc;
}
- if ((rc = p_slot->hpc_ops->check_cmd_status(ctrl))) {
- err("%s: Failed to enable slot, error code(%d)\n", __FUNCTION__, rc);
- up(&ctrl->crit_sect);
- return rc;
- }
-
- up(&ctrl->crit_sect);
-
/* Wait for ~1 second */
wait_for_ctrl_irq (ctrl);
p_slot->is_a_board = 0x01;
p_slot->pwr_save = 1;
- /* Wait for exclusive access to hardware */
- down(&ctrl->crit_sect);
-
p_slot->hpc_ops->green_led_on(p_slot);
- /* Done with exclusive hardware access */
- up(&ctrl->crit_sect);
-
return 0;
err_exit:
- /* Wait for exclusive access to hardware */
- down(&ctrl->crit_sect);
-
/* turn off slot, turn on Amber LED, turn off Green LED */
rc = p_slot->hpc_ops->slot_disable(p_slot);
if (rc) {
err("%s: Issue of Slot Disable command failed\n", __FUNCTION__);
- /* Done with exclusive hardware access */
- up(&ctrl->crit_sect);
- return rc;
- }
-
- rc = p_slot->hpc_ops->check_cmd_status(ctrl);
- if (rc) {
- err("%s: Failed to disable slot, error code(%d)\n", __FUNCTION__, rc);
- /* Done with exclusive hardware access */
- up(&ctrl->crit_sect);
return rc;
}
- /* Done with exclusive hardware access */
- up(&ctrl->crit_sect);
-
return(rc);
}
if (p_slot->is_a_board)
p_slot->status = 0x01;
- /* Wait for exclusive access to hardware */
- down(&ctrl->crit_sect);
-
/* turn off slot, turn on Amber LED, turn off Green LED */
rc = p_slot->hpc_ops->slot_disable(p_slot);
if (rc) {
err("%s: Issue of Slot Disable command failed\n", __FUNCTION__);
- /* Done with exclusive hardware access */
- up(&ctrl->crit_sect);
return rc;
}
-
- rc = p_slot->hpc_ops->check_cmd_status(ctrl);
- if (rc) {
- err("%s: Failed to disable slot, error code(%d)\n", __FUNCTION__, rc);
- /* Done with exclusive hardware access */
- up(&ctrl->crit_sect);
- return rc;
- }
rc = p_slot->hpc_ops->set_attention_status(p_slot, 0);
if (rc) {
err("%s: Issue of Set Attention command failed\n", __FUNCTION__);
- /* Done with exclusive hardware access */
- up(&ctrl->crit_sect);
return rc;
}
- /* Done with exclusive hardware access */
- up(&ctrl->crit_sect);
-
p_slot->pwr_save = 0;
p_slot->is_a_board = 0;
} else {
p_slot->state = POWERON_STATE;
- if (shpchp_enable_slot(p_slot)) {
- /* Wait for exclusive access to hardware */
- down(&p_slot->ctrl->crit_sect);
-
+ if (shpchp_enable_slot(p_slot))
p_slot->hpc_ops->green_led_off(p_slot);
- /* Done with exclusive hardware access */
- up(&p_slot->ctrl->crit_sect);
- }
p_slot->state = STATIC_STATE;
}
if (pushbutton_pending)
shpchp_pushbutton_thread(pushbutton_pending);
else
- for (ctrl = shpchp_ctrl_list; ctrl; ctrl=ctrl->next)
+ list_for_each_entry(ctrl, &shpchp_ctrl_list, ctrl_list)
interrupt_event_handler(ctrl);
}
dbg("event_thread signals exit\n");
switch (p_slot->state) {
case BLINKINGOFF_STATE:
- /* Wait for exclusive access to hardware */
- down(&ctrl->crit_sect);
-
p_slot->hpc_ops->green_led_on(p_slot);
-
p_slot->hpc_ops->set_attention_status(p_slot, 0);
-
- /* Done with exclusive hardware access */
- up(&ctrl->crit_sect);
break;
case BLINKINGON_STATE:
- /* Wait for exclusive access to hardware */
- down(&ctrl->crit_sect);
-
p_slot->hpc_ops->green_led_off(p_slot);
-
p_slot->hpc_ops->set_attention_status(p_slot, 0);
-
- /* Done with exclusive hardware access */
- up(&ctrl->crit_sect);
-
break;
default:
warn("Not a valid state\n");
info(msg_button_on, p_slot->number);
}
- /* Wait for exclusive access to hardware */
- down(&ctrl->crit_sect);
-
/* blink green LED and turn off amber */
p_slot->hpc_ops->green_led_blink(p_slot);
-
p_slot->hpc_ops->set_attention_status(p_slot, 0);
- /* Done with exclusive hardware access */
- up(&ctrl->crit_sect);
-
init_timer(&p_slot->task_event);
p_slot->task_event.expires = jiffies + 5 * HZ; /* 5 second delay */
p_slot->task_event.function = (void (*)(unsigned long)) pushbutton_helper_thread;
} else if (ctrl->event_queue[loop].event_type == INT_POWER_FAULT) {
/***********POWER FAULT********************/
dbg("%s: power fault\n", __FUNCTION__);
- /* Wait for exclusive access to hardware */
- down(&ctrl->crit_sect);
-
p_slot->hpc_ops->set_attention_status(p_slot, 1);
-
p_slot->hpc_ops->green_led_off(p_slot);
-
- /* Done with exclusive hardware access */
- up(&ctrl->crit_sect);
} else {
/* refresh notification */
if (p_slot)
int shpchp_enable_slot (struct slot *p_slot)
{
u8 getstatus = 0;
- int rc;
+ int rc, retval = -ENODEV;
/* Check to see if (latch closed, card present, power off) */
- down(&p_slot->ctrl->crit_sect);
+ mutex_lock(&p_slot->ctrl->crit_sect);
rc = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus);
if (rc || !getstatus) {
info("%s: no adapter on slot(%x)\n", __FUNCTION__, p_slot->number);
- up(&p_slot->ctrl->crit_sect);
- return -ENODEV;
+ goto out;
}
rc = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
if (rc || getstatus) {
info("%s: latch open on slot(%x)\n", __FUNCTION__, p_slot->number);
- up(&p_slot->ctrl->crit_sect);
- return -ENODEV;
+ goto out;
}
rc = p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
if (rc || getstatus) {
info("%s: already enabled on slot(%x)\n", __FUNCTION__, p_slot->number);
- up(&p_slot->ctrl->crit_sect);
- return -ENODEV;
+ goto out;
}
- up(&p_slot->ctrl->crit_sect);
p_slot->is_a_board = 1;
dbg("%s: p_slot->pwr_save %x\n", __FUNCTION__, p_slot->pwr_save);
p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
- rc = board_added(p_slot);
- if (rc) {
+ if(((p_slot->ctrl->pci_dev->vendor == PCI_VENDOR_ID_AMD) ||
+ (p_slot->ctrl->pci_dev->device == PCI_DEVICE_ID_AMD_POGO_7458))
+ && p_slot->ctrl->num_slots == 1) {
+ /* handle amd pogo errata; this must be done before enable */
+ amd_pogo_errata_save_misc_reg(p_slot);
+ retval = board_added(p_slot);
+ /* handle amd pogo errata; this must be done after enable */
+ amd_pogo_errata_restore_misc_reg(p_slot);
+ } else
+ retval = board_added(p_slot);
+
+ if (retval) {
p_slot->hpc_ops->get_adapter_status(p_slot,
&(p_slot->presence_save));
p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
}
update_slot_info(p_slot);
- return rc;
+ out:
+ mutex_unlock(&p_slot->ctrl->crit_sect);
+ return retval;
}
int shpchp_disable_slot (struct slot *p_slot)
{
u8 getstatus = 0;
- int ret = 0;
+ int rc, retval = -ENODEV;
if (!p_slot->ctrl)
return -ENODEV;
/* Check to see if (latch closed, card present, power on) */
- down(&p_slot->ctrl->crit_sect);
+ mutex_lock(&p_slot->ctrl->crit_sect);
- ret = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus);
- if (ret || !getstatus) {
+ rc = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus);
+ if (rc || !getstatus) {
info("%s: no adapter on slot(%x)\n", __FUNCTION__, p_slot->number);
- up(&p_slot->ctrl->crit_sect);
- return -ENODEV;
+ goto out;
}
- ret = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
- if (ret || getstatus) {
+ rc = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
+ if (rc || getstatus) {
info("%s: latch open on slot(%x)\n", __FUNCTION__, p_slot->number);
- up(&p_slot->ctrl->crit_sect);
- return -ENODEV;
+ goto out;
}
- ret = p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
- if (ret || !getstatus) {
+ rc = p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
+ if (rc || !getstatus) {
info("%s: already disabled slot(%x)\n", __FUNCTION__, p_slot->number);
- up(&p_slot->ctrl->crit_sect);
- return -ENODEV;
+ goto out;
}
- up(&p_slot->ctrl->crit_sect);
- ret = remove_board(p_slot);
+ retval = remove_board(p_slot);
update_slot_info(p_slot);
- return ret;
+ out:
+ mutex_unlock(&p_slot->ctrl->crit_sect);
+ return retval;
}