#define IS_GFX_DEVICE(pdev) ((pdev->class >> 16) == PCI_BASE_CLASS_DISPLAY)
#define IS_ISA_DEVICE(pdev) ((pdev->class >> 8) == PCI_CLASS_BRIDGE_ISA)
+#define IS_AZALIA(pdev) ((pdev)->vendor == 0x8086 && (pdev)->device == 0x3a3e)
#define IOAPIC_RANGE_START (0xfee00000)
#define IOAPIC_RANGE_END (0xfeefffff)
/* global iommu list, set NULL for ignored DMAR units */
static struct intel_iommu **g_iommus;
+static void __init check_tylersburg_isoch(void);
static int rwbf_quirk;
/*
}
static int iommu_identity_mapping;
+#define IDENTMAP_ALL 1
+#define IDENTMAP_GFX 2
+#define IDENTMAP_AZALIA 4
static int iommu_domain_identity_map(struct dmar_domain *domain,
unsigned long long start,
static int iommu_should_identity_map(struct pci_dev *pdev, int startup)
{
- if (iommu_identity_mapping == 2)
- return IS_GFX_DEVICE(pdev);
+ if ((iommu_identity_mapping & IDENTMAP_AZALIA) && IS_AZALIA(pdev))
+ return 1;
+
+ if ((iommu_identity_mapping & IDENTMAP_GFX) && IS_GFX_DEVICE(pdev))
+ return 1;
+
+ if (!(iommu_identity_mapping & IDENTMAP_ALL))
+ return 0;
/*
* We want to start off with all devices in the 1:1 domain, and
}
if (iommu_pass_through)
- iommu_identity_mapping = 1;
+ iommu_identity_mapping |= IDENTMAP_ALL;
+
#ifdef CONFIG_DMAR_BROKEN_GFX_WA
- else
- iommu_identity_mapping = 2;
+ iommu_identity_mapping |= IDENTMAP_GFX;
#endif
+
+ check_tylersburg_isoch();
+
/*
* If pass through is not set or not enabled, setup context entries for
* identity mappings for rmrr, gfx, and isa and may fall back to static
size = PAGE_ALIGN(size);
order = get_order(size);
- flags &= ~(GFP_DMA | GFP_DMA32);
+
+ if (!iommu_no_mapping(hwdev))
+ flags &= ~(GFP_DMA | GFP_DMA32);
+ else if (hwdev->coherent_dma_mask < dma_get_required_mask(hwdev)) {
+ if (hwdev->coherent_dma_mask < DMA_BIT_MASK(32))
+ flags |= GFP_DMA;
+ else
+ flags |= GFP_DMA32;
+ }
vaddr = (void *)__get_free_pages(flags, order);
if (!vaddr)
}
#endif /* CONFIG_PM */
+/*
+ * Here we only respond to action of unbound device from driver.
+ *
+ * Added device is not attached to its DMAR domain here yet. That will happen
+ * when mapping the device to iova.
+ */
+static int device_notifier(struct notifier_block *nb,
+ unsigned long action, void *data)
+{
+ struct device *dev = data;
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct dmar_domain *domain;
+
+ domain = find_domain(pdev);
+ if (!domain)
+ return 0;
+
+ if (action == BUS_NOTIFY_UNBOUND_DRIVER && !iommu_pass_through)
+ domain_remove_one_dev_info(domain, pdev);
+
+ return 0;
+}
+
+static struct notifier_block device_nb = {
+ .notifier_call = device_notifier,
+};
+
int __init intel_iommu_init(void)
{
int ret = 0;
register_iommu(&intel_iommu_ops);
+ bus_register_notifier(&pci_bus_type, &device_nb);
+
return 0;
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2a40, quirk_iommu_rwbf);
+
+/* On Tylersburg chipsets, some BIOSes have been known to enable the
+ ISOCH DMAR unit for the Azalia sound device, but not give it any
+ TLB entries, which causes it to deadlock. Check for that. We do
+ this in a function called from init_dmars(), instead of in a PCI
+ quirk, because we don't want to print the obnoxious "BIOS broken"
+ message if VT-d is actually disabled.
+*/
+static void __init check_tylersburg_isoch(void)
+{
+ struct pci_dev *pdev;
+ uint32_t vtisochctrl;
+
+ /* If there's no Azalia in the system anyway, forget it. */
+ pdev = pci_get_device(PCI_VENDOR_ID_INTEL, 0x3a3e, NULL);
+ if (!pdev)
+ return;
+ pci_dev_put(pdev);
+
+ /* System Management Registers. Might be hidden, in which case
+ we can't do the sanity check. But that's OK, because the
+ known-broken BIOSes _don't_ actually hide it, so far. */
+ pdev = pci_get_device(PCI_VENDOR_ID_INTEL, 0x342e, NULL);
+ if (!pdev)
+ return;
+
+ if (pci_read_config_dword(pdev, 0x188, &vtisochctrl)) {
+ pci_dev_put(pdev);
+ return;
+ }
+
+ pci_dev_put(pdev);
+
+ /* If Azalia DMA is routed to the non-isoch DMAR unit, fine. */
+ if (vtisochctrl & 1)
+ return;
+
+ /* Drop all bits other than the number of TLB entries */
+ vtisochctrl &= 0x1c;
+
+ /* If we have the recommended number of TLB entries (16), fine. */
+ if (vtisochctrl == 0x10)
+ return;
+
+ /* Zero TLB entries? You get to ride the short bus to school. */
+ if (!vtisochctrl) {
+ WARN(1, "Your BIOS is broken; DMA routed to ISOCH DMAR unit but no TLB space.\n"
+ "BIOS vendor: %s; Ver: %s; Product Version: %s\n",
+ dmi_get_system_info(DMI_BIOS_VENDOR),
+ dmi_get_system_info(DMI_BIOS_VERSION),
+ dmi_get_system_info(DMI_PRODUCT_VERSION));
+ iommu_identity_mapping |= IDENTMAP_AZALIA;
+ return;
+ }
+
+ printk(KERN_WARNING "DMAR: Recommended TLB entries for ISOCH unit is 16; your BIOS set %d\n",
+ vtisochctrl);
+}
projects / karo-tx-linux.git / blobdiff