*/
if (state != PCI_D0 && dev->current_state <= PCI_D3cold
&& dev->current_state > state) {
- dev_err(&dev->dev, "invalid power transition "
- "(from state %d to %d)\n", dev->current_state, state);
+ dev_err(&dev->dev, "invalid power transition (from state %d to %d)\n",
+ dev->current_state, state);
return -EINVAL;
}
pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK);
if (dev->current_state != state && printk_ratelimit())
- dev_info(&dev->dev, "Refused to change power state, "
- "currently in D%d\n", dev->current_state);
+ dev_info(&dev->dev, "Refused to change power state, currently in D%d\n",
+ dev->current_state);
/*
* According to section 5.4.1 of the "PCI BUS POWER MANAGEMENT
return;
for (;;) {
- dev_dbg(&pdev->dev, "restoring config space at offset "
- "%#x (was %#x, writing %#x)\n", offset, val, saved_val);
+ dev_dbg(&pdev->dev, "restoring config space at offset %#x (was %#x, writing %#x)\n",
+ offset, val, saved_val);
pci_write_config_dword(pdev, offset, saved_val);
if (retry-- <= 0)
return;
if (cacheline_size == pci_cache_line_size)
return 0;
- dev_printk(KERN_DEBUG, &dev->dev, "cache line size of %d is not "
- "supported\n", pci_cache_line_size << 2);
+ dev_printk(KERN_DEBUG, &dev->dev, "cache line size of %d is not supported\n",
+ pci_cache_line_size << 2);
return -EINVAL;
}
* go ahead and check it.
*/
if ((new ^ orig) & ~PCI_COMMAND_INTX_DISABLE) {
- dev_err(&dev->dev, "Command register changed from "
- "0x%x to 0x%x: driver or hardware bug?\n", orig, new);
+ dev_err(&dev->dev, "Command register changed from 0x%x to 0x%x: driver or hardware bug?\n",
+ orig, new);
} else if ((new ^ orig) & PCI_COMMAND_INTX_DISABLE) {
mask_supported = true;
pci_write_config_word(dev, PCI_COMMAND, orig);
if (!pci_is_pcie(dev))
return 1;
- return pci_wait_for_pending(dev, PCI_EXP_DEVSTA, PCI_EXP_DEVSTA_TRPND);
+ return pci_wait_for_pending(dev, pci_pcie_cap(dev) + PCI_EXP_DEVSTA,
+ PCI_EXP_DEVSTA_TRPND);
}
EXPORT_SYMBOL(pci_wait_for_pending_transaction);
if (probe)
return 0;
- /* Wait for Transaction Pending bit clean */
- if (pci_wait_for_pending(dev, PCI_AF_STATUS, PCI_AF_STATUS_TP))
+ /*
+ * Wait for Transaction Pending bit to clear. A word-aligned test
+ * is used, so we use the conrol offset rather than status and shift
+ * the test bit to match.
+ */
+ if (pci_wait_for_pending(dev, pos + PCI_AF_CTRL,
+ PCI_AF_STATUS_TP << 8))
goto clear;
- dev_err(&dev->dev, "transaction is not cleared; "
- "proceeding with reset anyway\n");
+ dev_err(&dev->dev, "transaction is not cleared; proceeding with reset anyway\n");
clear:
pci_write_config_byte(dev, pos + PCI_AF_CTRL, PCI_AF_CTRL_FLR);
return 0;
}
-/**
- * pci_reset_bridge_secondary_bus - Reset the secondary bus on a PCI bridge.
- * @dev: Bridge device
- *
- * Use the bridge control register to assert reset on the secondary bus.
- * Devices on the secondary bus are left in power-on state.
- */
-void pci_reset_bridge_secondary_bus(struct pci_dev *dev)
+void __weak pcibios_reset_secondary_bus(struct pci_dev *dev)
{
u16 ctrl;
*/
ssleep(1);
}
+
+/**
+ * pci_reset_bridge_secondary_bus - Reset the secondary bus on a PCI bridge.
+ * @dev: Bridge device
+ *
+ * Use the bridge control register to assert reset on the secondary bus.
+ * Devices on the secondary bus are left in power-on state.
+ */
+void pci_reset_bridge_secondary_bus(struct pci_dev *dev)
+{
+ pcibios_reset_secondary_bus(dev);
+}
EXPORT_SYMBOL_GPL(pci_reset_bridge_secondary_bus);
static int pci_parent_bus_reset(struct pci_dev *dev, int probe)