#include <linux/delay.h>
#include <linux/pci.h>
#include <linux/backlight.h>
+#include <linux/leds.h>
#include <linux/fb.h>
#include <linux/dmi.h>
#include <linux/platform_device.h>
#include <linux/rfkill.h>
+#include <linux/acpi.h>
+#include <linux/seq_file.h>
+#include <linux/debugfs.h>
+#include <linux/ctype.h>
+#if (defined CONFIG_ACPI_VIDEO || defined CONFIG_ACPI_VIDEO_MODULE)
+#include <acpi/video.h>
+#endif
/*
* This driver is needed because a number of Samsung laptops do not hook
#define SABI_IFACE_COMPLETE 0x04
#define SABI_IFACE_DATA 0x05
-/* Structure to get data back to the calling function */
-struct sabi_retval {
- u8 retval[20];
+#define WL_STATUS_WLAN 0x0
+#define WL_STATUS_BT 0x2
+
+/* Structure get/set data using sabi */
+struct sabi_data {
+ union {
+ struct {
+ u32 d0;
+ u32 d1;
+ u16 d2;
+ u8 d3;
+ };
+ u8 data[11];
+ };
};
struct sabi_header_offsets {
* Brightness is 0 - 8, as described above.
* Value 0 is for the BIOS to use
*/
- u8 get_brightness;
- u8 set_brightness;
+ u16 get_brightness;
+ u16 set_brightness;
/*
* first byte:
* 0x03 - 3G is on
* TODO, verify 3G is correct, that doesn't seem right...
*/
- u8 get_wireless_button;
- u8 set_wireless_button;
+ u16 get_wireless_button;
+ u16 set_wireless_button;
/* 0 is off, 1 is on */
- u8 get_backlight;
- u8 set_backlight;
+ u16 get_backlight;
+ u16 set_backlight;
/*
* 0x80 or 0x00 - no action
* 0x81 - recovery key pressed
*/
- u8 get_recovery_mode;
- u8 set_recovery_mode;
+ u16 get_recovery_mode;
+ u16 set_recovery_mode;
/*
* on seclinux: 0 is low, 1 is high,
* on swsmi: 0 is normal, 1 is silent, 2 is turbo
*/
- u8 get_performance_level;
- u8 set_performance_level;
+ u16 get_performance_level;
+ u16 set_performance_level;
+
+ /* 0x80 is off, 0x81 is on */
+ u16 get_battery_life_extender;
+ u16 set_battery_life_extender;
+
+ /* 0x80 is off, 0x81 is on */
+ u16 get_usb_charge;
+ u16 set_usb_charge;
+
+ /* the first byte is for bluetooth and the third one is for wlan */
+ u16 get_wireless_status;
+ u16 set_wireless_status;
+
+ /* 0x81 to read, (0x82 | level << 8) to set, 0xaabb to enable */
+ u16 kbd_backlight;
/*
* Tell the BIOS that Linux is running on this machine.
* 81 is on, 80 is off
*/
- u8 set_linux;
+ u16 set_linux;
};
struct sabi_performance_level {
const char *name;
- u8 value;
+ u16 value;
};
struct sabi_config {
+ int sabi_version;
const char *test_string;
u16 main_function;
const struct sabi_header_offsets header_offsets;
static const struct sabi_config sabi_configs[] = {
{
+ /* I don't know if it is really 2, but it it is
+ * less than 3 anyway */
+ .sabi_version = 2,
+
.test_string = "SECLINUX",
.main_function = 0x4c49,
.get_performance_level = 0x08,
.set_performance_level = 0x09,
+ .get_battery_life_extender = 0xFFFF,
+ .set_battery_life_extender = 0xFFFF,
+
+ .get_usb_charge = 0xFFFF,
+ .set_usb_charge = 0xFFFF,
+
+ .get_wireless_status = 0xFFFF,
+ .set_wireless_status = 0xFFFF,
+
+ .kbd_backlight = 0xFFFF,
+
.set_linux = 0x0a,
},
.max_brightness = 8,
},
{
+ .sabi_version = 3,
+
.test_string = "SwSmi@",
.main_function = 0x5843,
.get_performance_level = 0x31,
.set_performance_level = 0x32,
+ .get_battery_life_extender = 0x65,
+ .set_battery_life_extender = 0x66,
+
+ .get_usb_charge = 0x67,
+ .set_usb_charge = 0x68,
+
+ .get_wireless_status = 0x69,
+ .set_wireless_status = 0x6a,
+
+ .kbd_backlight = 0x78,
+
.set_linux = 0xff,
},
{ },
};
-static const struct sabi_config *sabi_config;
+/*
+ * samsung-laptop/ - debugfs root directory
+ * f0000_segment - dump f0000 segment
+ * command - current command
+ * data - current data
+ * d0, d1, d2, d3 - data fields
+ * call - call SABI using command and data
+ *
+ * This allow to call arbitrary sabi commands wihout
+ * modifying the driver at all.
+ * For example, setting the keyboard backlight brightness to 5
+ *
+ * echo 0x78 > command
+ * echo 0x0582 > d0
+ * echo 0 > d1
+ * echo 0 > d2
+ * echo 0 > d3
+ * cat call
+ */
+
+struct samsung_laptop_debug {
+ struct dentry *root;
+ struct sabi_data data;
+ u16 command;
+
+ struct debugfs_blob_wrapper f0000_wrapper;
+ struct debugfs_blob_wrapper data_wrapper;
+ struct debugfs_blob_wrapper sdiag_wrapper;
+};
+
+struct samsung_laptop;
+
+struct samsung_rfkill {
+ struct samsung_laptop *samsung;
+ struct rfkill *rfkill;
+ enum rfkill_type type;
+};
+
+struct samsung_laptop {
+ const struct sabi_config *config;
+
+ void __iomem *sabi;
+ void __iomem *sabi_iface;
+ void __iomem *f0000_segment;
+
+ struct mutex sabi_mutex;
+
+ struct platform_device *platform_device;
+ struct backlight_device *backlight_device;
+
+ struct samsung_rfkill wlan;
+ struct samsung_rfkill bluetooth;
+
+ struct led_classdev kbd_led;
+ int kbd_led_wk;
+ struct workqueue_struct *led_workqueue;
+ struct work_struct kbd_led_work;
+
+ struct samsung_laptop_debug debug;
+ struct samsung_quirks *quirks;
+
+ bool handle_backlight;
+ bool has_stepping_quirk;
+
+ char sdiag[64];
+};
+
+struct samsung_quirks {
+ bool broken_acpi_video;
+};
+
+static struct samsung_quirks samsung_unknown = {};
-static void __iomem *sabi;
-static void __iomem *sabi_iface;
-static void __iomem *f0000_segment;
-static struct backlight_device *backlight_device;
-static struct mutex sabi_mutex;
-static struct platform_device *sdev;
-static struct rfkill *rfk;
-static bool has_stepping_quirk;
+static struct samsung_quirks samsung_broken_acpi_video = {
+ .broken_acpi_video = true,
+};
static bool force;
module_param(force, bool, 0);
module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug enabled or not");
-static int sabi_get_command(u8 command, struct sabi_retval *sretval)
+static int sabi_command(struct samsung_laptop *samsung, u16 command,
+ struct sabi_data *in,
+ struct sabi_data *out)
{
- int retval = 0;
- u16 port = readw(sabi + sabi_config->header_offsets.port);
+ const struct sabi_config *config = samsung->config;
+ int ret = 0;
+ u16 port = readw(samsung->sabi + config->header_offsets.port);
u8 complete, iface_data;
- mutex_lock(&sabi_mutex);
-
- /* enable memory to be able to write to it */
- outb(readb(sabi + sabi_config->header_offsets.en_mem), port);
-
- /* write out the command */
- writew(sabi_config->main_function, sabi_iface + SABI_IFACE_MAIN);
- writew(command, sabi_iface + SABI_IFACE_SUB);
- writeb(0, sabi_iface + SABI_IFACE_COMPLETE);
- outb(readb(sabi + sabi_config->header_offsets.iface_func), port);
-
- /* write protect memory to make it safe */
- outb(readb(sabi + sabi_config->header_offsets.re_mem), port);
+ mutex_lock(&samsung->sabi_mutex);
- /* see if the command actually succeeded */
- complete = readb(sabi_iface + SABI_IFACE_COMPLETE);
- iface_data = readb(sabi_iface + SABI_IFACE_DATA);
- if (complete != 0xaa || iface_data == 0xff) {
- pr_warn("SABI get command 0x%02x failed with completion flag 0x%02x and data 0x%02x\n",
- command, complete, iface_data);
- retval = -EINVAL;
- goto exit;
+ if (debug) {
+ if (in)
+ pr_info("SABI command:0x%04x "
+ "data:{0x%08x, 0x%08x, 0x%04x, 0x%02x}",
+ command, in->d0, in->d1, in->d2, in->d3);
+ else
+ pr_info("SABI command:0x%04x", command);
}
- /*
- * Save off the data into a structure so the caller use it.
- * Right now we only want the first 4 bytes,
- * There are commands that need more, but not for the ones we
- * currently care about.
- */
- sretval->retval[0] = readb(sabi_iface + SABI_IFACE_DATA);
- sretval->retval[1] = readb(sabi_iface + SABI_IFACE_DATA + 1);
- sretval->retval[2] = readb(sabi_iface + SABI_IFACE_DATA + 2);
- sretval->retval[3] = readb(sabi_iface + SABI_IFACE_DATA + 3);
-
-exit:
- mutex_unlock(&sabi_mutex);
- return retval;
-
-}
-
-static int sabi_set_command(u8 command, u8 data)
-{
- int retval = 0;
- u16 port = readw(sabi + sabi_config->header_offsets.port);
- u8 complete, iface_data;
-
- mutex_lock(&sabi_mutex);
/* enable memory to be able to write to it */
- outb(readb(sabi + sabi_config->header_offsets.en_mem), port);
+ outb(readb(samsung->sabi + config->header_offsets.en_mem), port);
/* write out the command */
- writew(sabi_config->main_function, sabi_iface + SABI_IFACE_MAIN);
- writew(command, sabi_iface + SABI_IFACE_SUB);
- writeb(0, sabi_iface + SABI_IFACE_COMPLETE);
- writeb(data, sabi_iface + SABI_IFACE_DATA);
- outb(readb(sabi + sabi_config->header_offsets.iface_func), port);
+ writew(config->main_function, samsung->sabi_iface + SABI_IFACE_MAIN);
+ writew(command, samsung->sabi_iface + SABI_IFACE_SUB);
+ writeb(0, samsung->sabi_iface + SABI_IFACE_COMPLETE);
+ if (in) {
+ writel(in->d0, samsung->sabi_iface + SABI_IFACE_DATA);
+ writel(in->d1, samsung->sabi_iface + SABI_IFACE_DATA + 4);
+ writew(in->d2, samsung->sabi_iface + SABI_IFACE_DATA + 8);
+ writeb(in->d3, samsung->sabi_iface + SABI_IFACE_DATA + 10);
+ }
+ outb(readb(samsung->sabi + config->header_offsets.iface_func), port);
/* write protect memory to make it safe */
- outb(readb(sabi + sabi_config->header_offsets.re_mem), port);
+ outb(readb(samsung->sabi + config->header_offsets.re_mem), port);
/* see if the command actually succeeded */
- complete = readb(sabi_iface + SABI_IFACE_COMPLETE);
- iface_data = readb(sabi_iface + SABI_IFACE_DATA);
+ complete = readb(samsung->sabi_iface + SABI_IFACE_COMPLETE);
+ iface_data = readb(samsung->sabi_iface + SABI_IFACE_DATA);
+
+ /* iface_data = 0xFF happens when a command is not known
+ * so we only add a warning in debug mode since we will
+ * probably issue some unknown command at startup to find
+ * out which features are supported */
+ if (complete != 0xaa || (iface_data == 0xff && debug))
+ pr_warn("SABI command 0x%04x failed with"
+ " completion flag 0x%02x and interface data 0x%02x",
+ command, complete, iface_data);
+
if (complete != 0xaa || iface_data == 0xff) {
- pr_warn("SABI set command 0x%02x failed with completion flag 0x%02x and data 0x%02x\n",
- command, complete, iface_data);
- retval = -EINVAL;
+ ret = -EINVAL;
+ goto exit;
}
- mutex_unlock(&sabi_mutex);
- return retval;
-}
-
-static void test_backlight(void)
-{
- struct sabi_retval sretval;
-
- sabi_get_command(sabi_config->commands.get_backlight, &sretval);
- printk(KERN_DEBUG "backlight = 0x%02x\n", sretval.retval[0]);
-
- sabi_set_command(sabi_config->commands.set_backlight, 0);
- printk(KERN_DEBUG "backlight should be off\n");
-
- sabi_get_command(sabi_config->commands.get_backlight, &sretval);
- printk(KERN_DEBUG "backlight = 0x%02x\n", sretval.retval[0]);
-
- msleep(1000);
+ if (out) {
+ out->d0 = readl(samsung->sabi_iface + SABI_IFACE_DATA);
+ out->d1 = readl(samsung->sabi_iface + SABI_IFACE_DATA + 4);
+ out->d2 = readw(samsung->sabi_iface + SABI_IFACE_DATA + 2);
+ out->d3 = readb(samsung->sabi_iface + SABI_IFACE_DATA + 1);
+ }
- sabi_set_command(sabi_config->commands.set_backlight, 1);
- printk(KERN_DEBUG "backlight should be on\n");
+ if (debug && out) {
+ pr_info("SABI return data:{0x%08x, 0x%08x, 0x%04x, 0x%02x}",
+ out->d0, out->d1, out->d2, out->d3);
+ }
- sabi_get_command(sabi_config->commands.get_backlight, &sretval);
- printk(KERN_DEBUG "backlight = 0x%02x\n", sretval.retval[0]);
+exit:
+ mutex_unlock(&samsung->sabi_mutex);
+ return ret;
}
-static void test_wireless(void)
+/* simple wrappers usable with most commands */
+static int sabi_set_commandb(struct samsung_laptop *samsung,
+ u16 command, u8 data)
{
- struct sabi_retval sretval;
+ struct sabi_data in = { { { .d0 = 0, .d1 = 0, .d2 = 0, .d3 = 0 } } };
- sabi_get_command(sabi_config->commands.get_wireless_button, &sretval);
- printk(KERN_DEBUG "wireless led = 0x%02x\n", sretval.retval[0]);
-
- sabi_set_command(sabi_config->commands.set_wireless_button, 0);
- printk(KERN_DEBUG "wireless led should be off\n");
-
- sabi_get_command(sabi_config->commands.get_wireless_button, &sretval);
- printk(KERN_DEBUG "wireless led = 0x%02x\n", sretval.retval[0]);
-
- msleep(1000);
-
- sabi_set_command(sabi_config->commands.set_wireless_button, 1);
- printk(KERN_DEBUG "wireless led should be on\n");
-
- sabi_get_command(sabi_config->commands.get_wireless_button, &sretval);
- printk(KERN_DEBUG "wireless led = 0x%02x\n", sretval.retval[0]);
+ in.data[0] = data;
+ return sabi_command(samsung, command, &in, NULL);
}
-static u8 read_brightness(void)
+static int read_brightness(struct samsung_laptop *samsung)
{
- struct sabi_retval sretval;
+ const struct sabi_config *config = samsung->config;
+ const struct sabi_commands *commands = &samsung->config->commands;
+ struct sabi_data sretval;
int user_brightness = 0;
int retval;
- retval = sabi_get_command(sabi_config->commands.get_brightness,
- &sretval);
- if (!retval) {
- user_brightness = sretval.retval[0];
- if (user_brightness > sabi_config->min_brightness)
- user_brightness -= sabi_config->min_brightness;
- else
- user_brightness = 0;
- }
+ retval = sabi_command(samsung, commands->get_brightness,
+ NULL, &sretval);
+ if (retval)
+ return retval;
+
+ user_brightness = sretval.data[0];
+ if (user_brightness > config->min_brightness)
+ user_brightness -= config->min_brightness;
+ else
+ user_brightness = 0;
+
return user_brightness;
}
-static void set_brightness(u8 user_brightness)
+static void set_brightness(struct samsung_laptop *samsung, u8 user_brightness)
{
- u8 user_level = user_brightness + sabi_config->min_brightness;
+ const struct sabi_config *config = samsung->config;
+ const struct sabi_commands *commands = &samsung->config->commands;
+ u8 user_level = user_brightness + config->min_brightness;
- if (has_stepping_quirk && user_level != 0) {
+ if (samsung->has_stepping_quirk && user_level != 0) {
/*
* short circuit if the specified level is what's already set
* to prevent the screen from flickering needlessly
*/
- if (user_brightness == read_brightness())
+ if (user_brightness == read_brightness(samsung))
return;
- sabi_set_command(sabi_config->commands.set_brightness, 0);
+ sabi_set_commandb(samsung, commands->set_brightness, 0);
}
- sabi_set_command(sabi_config->commands.set_brightness, user_level);
+ sabi_set_commandb(samsung, commands->set_brightness, user_level);
}
static int get_brightness(struct backlight_device *bd)
{
- return (int)read_brightness();
+ struct samsung_laptop *samsung = bl_get_data(bd);
+
+ return read_brightness(samsung);
}
-static void check_for_stepping_quirk(void)
+static void check_for_stepping_quirk(struct samsung_laptop *samsung)
{
- u8 initial_level;
- u8 check_level;
- u8 orig_level = read_brightness();
+ int initial_level;
+ int check_level;
+ int orig_level = read_brightness(samsung);
/*
* Some laptops exhibit the strange behaviour of stepping toward
*/
if (orig_level == 0)
- set_brightness(1);
+ set_brightness(samsung, 1);
- initial_level = read_brightness();
+ initial_level = read_brightness(samsung);
if (initial_level <= 2)
check_level = initial_level + 2;
else
check_level = initial_level - 2;
- has_stepping_quirk = false;
- set_brightness(check_level);
+ samsung->has_stepping_quirk = false;
+ set_brightness(samsung, check_level);
- if (read_brightness() != check_level) {
- has_stepping_quirk = true;
+ if (read_brightness(samsung) != check_level) {
+ samsung->has_stepping_quirk = true;
pr_info("enabled workaround for brightness stepping quirk\n");
}
- set_brightness(orig_level);
+ set_brightness(samsung, orig_level);
}
static int update_status(struct backlight_device *bd)
{
- set_brightness(bd->props.brightness);
+ struct samsung_laptop *samsung = bl_get_data(bd);
+ const struct sabi_commands *commands = &samsung->config->commands;
+
+ set_brightness(samsung, bd->props.brightness);
if (bd->props.power == FB_BLANK_UNBLANK)
- sabi_set_command(sabi_config->commands.set_backlight, 1);
+ sabi_set_commandb(samsung, commands->set_backlight, 1);
else
- sabi_set_command(sabi_config->commands.set_backlight, 0);
+ sabi_set_commandb(samsung, commands->set_backlight, 0);
+
return 0;
}
.update_status = update_status,
};
-static int rfkill_set(void *data, bool blocked)
+static int seclinux_rfkill_set(void *data, bool blocked)
{
- /* Do something with blocked...*/
- /*
- * blocked == false is on
- * blocked == true is off
- */
- if (blocked)
- sabi_set_command(sabi_config->commands.set_wireless_button, 0);
- else
- sabi_set_command(sabi_config->commands.set_wireless_button, 1);
+ struct samsung_rfkill *srfkill = data;
+ struct samsung_laptop *samsung = srfkill->samsung;
+ const struct sabi_commands *commands = &samsung->config->commands;
- return 0;
+ return sabi_set_commandb(samsung, commands->set_wireless_button,
+ !blocked);
}
-static struct rfkill_ops rfkill_ops = {
- .set_block = rfkill_set,
+static struct rfkill_ops seclinux_rfkill_ops = {
+ .set_block = seclinux_rfkill_set,
};
-static int init_wireless(struct platform_device *sdev)
+static int swsmi_wireless_status(struct samsung_laptop *samsung,
+ struct sabi_data *data)
{
- int retval;
+ const struct sabi_commands *commands = &samsung->config->commands;
- rfk = rfkill_alloc("samsung-wifi", &sdev->dev, RFKILL_TYPE_WLAN,
- &rfkill_ops, NULL);
- if (!rfk)
- return -ENOMEM;
-
- retval = rfkill_register(rfk);
- if (retval) {
- rfkill_destroy(rfk);
- return -ENODEV;
- }
+ return sabi_command(samsung, commands->get_wireless_status,
+ NULL, data);
+}
- return 0;
+static int swsmi_rfkill_set(void *priv, bool blocked)
+{
+ struct samsung_rfkill *srfkill = priv;
+ struct samsung_laptop *samsung = srfkill->samsung;
+ const struct sabi_commands *commands = &samsung->config->commands;
+ struct sabi_data data;
+ int ret, i;
+
+ ret = swsmi_wireless_status(samsung, &data);
+ if (ret)
+ return ret;
+
+ /* Don't set the state for non-present devices */
+ for (i = 0; i < 4; i++)
+ if (data.data[i] == 0x02)
+ data.data[1] = 0;
+
+ if (srfkill->type == RFKILL_TYPE_WLAN)
+ data.data[WL_STATUS_WLAN] = !blocked;
+ else if (srfkill->type == RFKILL_TYPE_BLUETOOTH)
+ data.data[WL_STATUS_BT] = !blocked;
+
+ return sabi_command(samsung, commands->set_wireless_status,
+ &data, &data);
}
-static void destroy_wireless(void)
+static void swsmi_rfkill_query(struct rfkill *rfkill, void *priv)
{
- rfkill_unregister(rfk);
- rfkill_destroy(rfk);
+ struct samsung_rfkill *srfkill = priv;
+ struct samsung_laptop *samsung = srfkill->samsung;
+ struct sabi_data data;
+ int ret;
+
+ ret = swsmi_wireless_status(samsung, &data);
+ if (ret)
+ return ;
+
+ if (srfkill->type == RFKILL_TYPE_WLAN)
+ ret = data.data[WL_STATUS_WLAN];
+ else if (srfkill->type == RFKILL_TYPE_BLUETOOTH)
+ ret = data.data[WL_STATUS_BT];
+ else
+ return ;
+
+ rfkill_set_sw_state(rfkill, !ret);
}
+static struct rfkill_ops swsmi_rfkill_ops = {
+ .set_block = swsmi_rfkill_set,
+ .query = swsmi_rfkill_query,
+};
+
static ssize_t get_performance_level(struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct sabi_retval sretval;
+ struct samsung_laptop *samsung = dev_get_drvdata(dev);
+ const struct sabi_config *config = samsung->config;
+ const struct sabi_commands *commands = &config->commands;
+ struct sabi_data sretval;
int retval;
int i;
/* Read the state */
- retval = sabi_get_command(sabi_config->commands.get_performance_level,
- &sretval);
+ retval = sabi_command(samsung, commands->get_performance_level,
+ NULL, &sretval);
if (retval)
return retval;
/* The logic is backwards, yeah, lots of fun... */
- for (i = 0; sabi_config->performance_levels[i].name; ++i) {
- if (sretval.retval[0] == sabi_config->performance_levels[i].value)
- return sprintf(buf, "%s\n", sabi_config->performance_levels[i].name);
+ for (i = 0; config->performance_levels[i].name; ++i) {
+ if (sretval.data[0] == config->performance_levels[i].value)
+ return sprintf(buf, "%s\n", config->performance_levels[i].name);
}
return sprintf(buf, "%s\n", "unknown");
}
struct device_attribute *attr, const char *buf,
size_t count)
{
- if (count >= 1) {
- int i;
- for (i = 0; sabi_config->performance_levels[i].name; ++i) {
- const struct sabi_performance_level *level =
- &sabi_config->performance_levels[i];
- if (!strncasecmp(level->name, buf, strlen(level->name))) {
- sabi_set_command(sabi_config->commands.set_performance_level,
- level->value);
- break;
- }
+ struct samsung_laptop *samsung = dev_get_drvdata(dev);
+ const struct sabi_config *config = samsung->config;
+ const struct sabi_commands *commands = &config->commands;
+ int i;
+
+ if (count < 1)
+ return count;
+
+ for (i = 0; config->performance_levels[i].name; ++i) {
+ const struct sabi_performance_level *level =
+ &config->performance_levels[i];
+ if (!strncasecmp(level->name, buf, strlen(level->name))) {
+ sabi_set_commandb(samsung,
+ commands->set_performance_level,
+ level->value);
+ break;
}
- if (!sabi_config->performance_levels[i].name)
- return -EINVAL;
}
+
+ if (!config->performance_levels[i].name)
+ return -EINVAL;
+
return count;
}
+
static DEVICE_ATTR(performance_level, S_IWUSR | S_IRUGO,
get_performance_level, set_performance_level);
-
-static int __init dmi_check_cb(const struct dmi_system_id *id)
+static int read_battery_life_extender(struct samsung_laptop *samsung)
{
- pr_info("found laptop model '%s'\n",
- id->ident);
- return 1;
-}
+ const struct sabi_commands *commands = &samsung->config->commands;
+ struct sabi_data data;
+ int retval;
-static struct dmi_system_id __initdata samsung_dmi_table[] = {
- {
- .ident = "N128",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR,
- "SAMSUNG ELECTRONICS CO., LTD."),
- DMI_MATCH(DMI_PRODUCT_NAME, "N128"),
- DMI_MATCH(DMI_BOARD_NAME, "N128"),
- },
- .callback = dmi_check_cb,
- },
- {
- .ident = "N130",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR,
- "SAMSUNG ELECTRONICS CO., LTD."),
- DMI_MATCH(DMI_PRODUCT_NAME, "N130"),
- DMI_MATCH(DMI_BOARD_NAME, "N130"),
- },
- .callback = dmi_check_cb,
- },
- {
- .ident = "N510",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR,
- "SAMSUNG ELECTRONICS CO., LTD."),
- DMI_MATCH(DMI_PRODUCT_NAME, "N510"),
- DMI_MATCH(DMI_BOARD_NAME, "N510"),
- },
- .callback = dmi_check_cb,
- },
- {
- .ident = "X125",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR,
- "SAMSUNG ELECTRONICS CO., LTD."),
- DMI_MATCH(DMI_PRODUCT_NAME, "X125"),
- DMI_MATCH(DMI_BOARD_NAME, "X125"),
- },
- .callback = dmi_check_cb,
- },
- {
- .ident = "X120/X170",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR,
- "SAMSUNG ELECTRONICS CO., LTD."),
- DMI_MATCH(DMI_PRODUCT_NAME, "X120/X170"),
- DMI_MATCH(DMI_BOARD_NAME, "X120/X170"),
- },
- .callback = dmi_check_cb,
- },
- {
- .ident = "NC10",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR,
- "SAMSUNG ELECTRONICS CO., LTD."),
- DMI_MATCH(DMI_PRODUCT_NAME, "NC10"),
- DMI_MATCH(DMI_BOARD_NAME, "NC10"),
- },
- .callback = dmi_check_cb,
- },
- {
- .ident = "NP-Q45",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR,
- "SAMSUNG ELECTRONICS CO., LTD."),
- DMI_MATCH(DMI_PRODUCT_NAME, "SQ45S70S"),
- DMI_MATCH(DMI_BOARD_NAME, "SQ45S70S"),
- },
- .callback = dmi_check_cb,
- },
- {
- .ident = "X360",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR,
- "SAMSUNG ELECTRONICS CO., LTD."),
- DMI_MATCH(DMI_PRODUCT_NAME, "X360"),
- DMI_MATCH(DMI_BOARD_NAME, "X360"),
- },
- .callback = dmi_check_cb,
- },
- {
- .ident = "R410 Plus",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR,
- "SAMSUNG ELECTRONICS CO., LTD."),
- DMI_MATCH(DMI_PRODUCT_NAME, "R410P"),
- DMI_MATCH(DMI_BOARD_NAME, "R460"),
- },
- .callback = dmi_check_cb,
- },
- {
- .ident = "R518",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR,
- "SAMSUNG ELECTRONICS CO., LTD."),
- DMI_MATCH(DMI_PRODUCT_NAME, "R518"),
- DMI_MATCH(DMI_BOARD_NAME, "R518"),
- },
- .callback = dmi_check_cb,
- },
- {
- .ident = "R519/R719",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR,
- "SAMSUNG ELECTRONICS CO., LTD."),
- DMI_MATCH(DMI_PRODUCT_NAME, "R519/R719"),
- DMI_MATCH(DMI_BOARD_NAME, "R519/R719"),
- },
- .callback = dmi_check_cb,
- },
- {
- .ident = "N150/N210/N220",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR,
- "SAMSUNG ELECTRONICS CO., LTD."),
- DMI_MATCH(DMI_PRODUCT_NAME, "N150/N210/N220"),
- DMI_MATCH(DMI_BOARD_NAME, "N150/N210/N220"),
- },
- .callback = dmi_check_cb,
- },
- {
- .ident = "N220",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR,
- "SAMSUNG ELECTRONICS CO., LTD."),
- DMI_MATCH(DMI_PRODUCT_NAME, "N220"),
- DMI_MATCH(DMI_BOARD_NAME, "N220"),
- },
- .callback = dmi_check_cb,
- },
- {
- .ident = "N150/N210/N220/N230",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR,
- "SAMSUNG ELECTRONICS CO., LTD."),
- DMI_MATCH(DMI_PRODUCT_NAME, "N150/N210/N220/N230"),
- DMI_MATCH(DMI_BOARD_NAME, "N150/N210/N220/N230"),
- },
- .callback = dmi_check_cb,
- },
- {
- .ident = "N150P/N210P/N220P",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR,
- "SAMSUNG ELECTRONICS CO., LTD."),
- DMI_MATCH(DMI_PRODUCT_NAME, "N150P/N210P/N220P"),
- DMI_MATCH(DMI_BOARD_NAME, "N150P/N210P/N220P"),
- },
- .callback = dmi_check_cb,
- },
- {
- .ident = "R700",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
- DMI_MATCH(DMI_PRODUCT_NAME, "SR700"),
- DMI_MATCH(DMI_BOARD_NAME, "SR700"),
- },
- .callback = dmi_check_cb,
- },
- {
- .ident = "R530/R730",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
- DMI_MATCH(DMI_PRODUCT_NAME, "R530/R730"),
- DMI_MATCH(DMI_BOARD_NAME, "R530/R730"),
- },
- .callback = dmi_check_cb,
- },
- {
- .ident = "NF110/NF210/NF310",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
- DMI_MATCH(DMI_PRODUCT_NAME, "NF110/NF210/NF310"),
- DMI_MATCH(DMI_BOARD_NAME, "NF110/NF210/NF310"),
- },
- .callback = dmi_check_cb,
- },
- {
- .ident = "N145P/N250P/N260P",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
- DMI_MATCH(DMI_PRODUCT_NAME, "N145P/N250P/N260P"),
- DMI_MATCH(DMI_BOARD_NAME, "N145P/N250P/N260P"),
- },
- .callback = dmi_check_cb,
- },
- {
- .ident = "R70/R71",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR,
- "SAMSUNG ELECTRONICS CO., LTD."),
- DMI_MATCH(DMI_PRODUCT_NAME, "R70/R71"),
- DMI_MATCH(DMI_BOARD_NAME, "R70/R71"),
- },
- .callback = dmi_check_cb,
- },
- {
- .ident = "P460",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
- DMI_MATCH(DMI_PRODUCT_NAME, "P460"),
- DMI_MATCH(DMI_BOARD_NAME, "P460"),
- },
- .callback = dmi_check_cb,
- },
- {
- .ident = "R528/R728",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
- DMI_MATCH(DMI_PRODUCT_NAME, "R528/R728"),
- DMI_MATCH(DMI_BOARD_NAME, "R528/R728"),
- },
- .callback = dmi_check_cb,
- },
- {
- .ident = "NC210/NC110",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
- DMI_MATCH(DMI_PRODUCT_NAME, "NC210/NC110"),
- DMI_MATCH(DMI_BOARD_NAME, "NC210/NC110"),
- },
- .callback = dmi_check_cb,
- },
- {
- .ident = "X520",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
- DMI_MATCH(DMI_PRODUCT_NAME, "X520"),
- DMI_MATCH(DMI_BOARD_NAME, "X520"),
- },
- .callback = dmi_check_cb,
- },
- { },
-};
-MODULE_DEVICE_TABLE(dmi, samsung_dmi_table);
+ if (commands->get_battery_life_extender == 0xFFFF)
+ return -ENODEV;
-static int find_signature(void __iomem *memcheck, const char *testStr)
-{
- int i = 0;
- int loca;
+ memset(&data, 0, sizeof(data));
+ data.data[0] = 0x80;
+ retval = sabi_command(samsung, commands->get_battery_life_extender,
+ &data, &data);
- for (loca = 0; loca < 0xffff; loca++) {
- char temp = readb(memcheck + loca);
+ if (retval)
+ return retval;
- if (temp == testStr[i]) {
- if (i == strlen(testStr)-1)
+ if (data.data[0] != 0 && data.data[0] != 1)
+ return -ENODEV;
+
+ return data.data[0];
+}
+
+static int write_battery_life_extender(struct samsung_laptop *samsung,
+ int enabled)
+{
+ const struct sabi_commands *commands = &samsung->config->commands;
+ struct sabi_data data;
+
+ memset(&data, 0, sizeof(data));
+ data.data[0] = 0x80 | enabled;
+ return sabi_command(samsung, commands->set_battery_life_extender,
+ &data, NULL);
+}
+
+static ssize_t get_battery_life_extender(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct samsung_laptop *samsung = dev_get_drvdata(dev);
+ int ret;
+
+ ret = read_battery_life_extender(samsung);
+ if (ret < 0)
+ return ret;
+
+ return sprintf(buf, "%d\n", ret);
+}
+
+static ssize_t set_battery_life_extender(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct samsung_laptop *samsung = dev_get_drvdata(dev);
+ int ret, value;
+
+ if (!count || sscanf(buf, "%i", &value) != 1)
+ return -EINVAL;
+
+ ret = write_battery_life_extender(samsung, !!value);
+ if (ret < 0)
+ return ret;
+
+ return count;
+}
+
+static DEVICE_ATTR(battery_life_extender, S_IWUSR | S_IRUGO,
+ get_battery_life_extender, set_battery_life_extender);
+
+static int read_usb_charge(struct samsung_laptop *samsung)
+{
+ const struct sabi_commands *commands = &samsung->config->commands;
+ struct sabi_data data;
+ int retval;
+
+ if (commands->get_usb_charge == 0xFFFF)
+ return -ENODEV;
+
+ memset(&data, 0, sizeof(data));
+ data.data[0] = 0x80;
+ retval = sabi_command(samsung, commands->get_usb_charge,
+ &data, &data);
+
+ if (retval)
+ return retval;
+
+ if (data.data[0] != 0 && data.data[0] != 1)
+ return -ENODEV;
+
+ return data.data[0];
+}
+
+static int write_usb_charge(struct samsung_laptop *samsung,
+ int enabled)
+{
+ const struct sabi_commands *commands = &samsung->config->commands;
+ struct sabi_data data;
+
+ memset(&data, 0, sizeof(data));
+ data.data[0] = 0x80 | enabled;
+ return sabi_command(samsung, commands->set_usb_charge,
+ &data, NULL);
+}
+
+static ssize_t get_usb_charge(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct samsung_laptop *samsung = dev_get_drvdata(dev);
+ int ret;
+
+ ret = read_usb_charge(samsung);
+ if (ret < 0)
+ return ret;
+
+ return sprintf(buf, "%d\n", ret);
+}
+
+static ssize_t set_usb_charge(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct samsung_laptop *samsung = dev_get_drvdata(dev);
+ int ret, value;
+
+ if (!count || sscanf(buf, "%i", &value) != 1)
+ return -EINVAL;
+
+ ret = write_usb_charge(samsung, !!value);
+ if (ret < 0)
+ return ret;
+
+ return count;
+}
+
+static DEVICE_ATTR(usb_charge, S_IWUSR | S_IRUGO,
+ get_usb_charge, set_usb_charge);
+
+static struct attribute *platform_attributes[] = {
+ &dev_attr_performance_level.attr,
+ &dev_attr_battery_life_extender.attr,
+ &dev_attr_usb_charge.attr,
+ NULL
+};
+
+static int find_signature(void __iomem *memcheck, const char *testStr)
+{
+ int i = 0;
+ int loca;
+
+ for (loca = 0; loca < 0xffff; loca++) {
+ char temp = readb(memcheck + loca);
+
+ if (temp == testStr[i]) {
+ if (i == strlen(testStr)-1)
break;
++i;
} else {
return loca;
}
-static int __init samsung_init(void)
+static void samsung_rfkill_exit(struct samsung_laptop *samsung)
{
- struct backlight_properties props;
- struct sabi_retval sretval;
- unsigned int ifaceP;
- int i;
- int loca;
+ if (samsung->wlan.rfkill) {
+ rfkill_unregister(samsung->wlan.rfkill);
+ rfkill_destroy(samsung->wlan.rfkill);
+ samsung->wlan.rfkill = NULL;
+ }
+ if (samsung->bluetooth.rfkill) {
+ rfkill_unregister(samsung->bluetooth.rfkill);
+ rfkill_destroy(samsung->bluetooth.rfkill);
+ samsung->bluetooth.rfkill = NULL;
+ }
+}
+
+static int samsung_new_rfkill(struct samsung_laptop *samsung,
+ struct samsung_rfkill *arfkill,
+ const char *name, enum rfkill_type type,
+ const struct rfkill_ops *ops,
+ int blocked)
+{
+ struct rfkill **rfkill = &arfkill->rfkill;
+ int ret;
+
+ arfkill->type = type;
+ arfkill->samsung = samsung;
+
+ *rfkill = rfkill_alloc(name, &samsung->platform_device->dev,
+ type, ops, arfkill);
+
+ if (!*rfkill)
+ return -EINVAL;
+
+ if (blocked != -1)
+ rfkill_init_sw_state(*rfkill, blocked);
+
+ ret = rfkill_register(*rfkill);
+ if (ret) {
+ rfkill_destroy(*rfkill);
+ *rfkill = NULL;
+ return ret;
+ }
+ return 0;
+}
+
+static int __init samsung_rfkill_init_seclinux(struct samsung_laptop *samsung)
+{
+ return samsung_new_rfkill(samsung, &samsung->wlan, "samsung-wlan",
+ RFKILL_TYPE_WLAN, &seclinux_rfkill_ops, -1);
+}
+
+static int __init samsung_rfkill_init_swsmi(struct samsung_laptop *samsung)
+{
+ struct sabi_data data;
+ int ret;
+
+ ret = swsmi_wireless_status(samsung, &data);
+ if (ret) {
+ /* Some swsmi laptops use the old seclinux way to control
+ * wireless devices */
+ if (ret == -EINVAL)
+ ret = samsung_rfkill_init_seclinux(samsung);
+ return ret;
+ }
+
+ /* 0x02 seems to mean that the device is no present/available */
+
+ if (data.data[WL_STATUS_WLAN] != 0x02)
+ ret = samsung_new_rfkill(samsung, &samsung->wlan,
+ "samsung-wlan",
+ RFKILL_TYPE_WLAN,
+ &swsmi_rfkill_ops,
+ !data.data[WL_STATUS_WLAN]);
+ if (ret)
+ goto exit;
+
+ if (data.data[WL_STATUS_BT] != 0x02)
+ ret = samsung_new_rfkill(samsung, &samsung->bluetooth,
+ "samsung-bluetooth",
+ RFKILL_TYPE_BLUETOOTH,
+ &swsmi_rfkill_ops,
+ !data.data[WL_STATUS_BT]);
+ if (ret)
+ goto exit;
+
+exit:
+ if (ret)
+ samsung_rfkill_exit(samsung);
+
+ return ret;
+}
+
+static int __init samsung_rfkill_init(struct samsung_laptop *samsung)
+{
+ if (samsung->config->sabi_version == 2)
+ return samsung_rfkill_init_seclinux(samsung);
+ if (samsung->config->sabi_version == 3)
+ return samsung_rfkill_init_swsmi(samsung);
+ return 0;
+}
+
+static int kbd_backlight_enable(struct samsung_laptop *samsung)
+{
+ const struct sabi_commands *commands = &samsung->config->commands;
+ struct sabi_data data;
int retval;
- mutex_init(&sabi_mutex);
+ if (commands->kbd_backlight == 0xFFFF)
+ return -ENODEV;
- if (!force && !dmi_check_system(samsung_dmi_table))
+ memset(&data, 0, sizeof(data));
+ data.d0 = 0xaabb;
+ retval = sabi_command(samsung, commands->kbd_backlight,
+ &data, &data);
+
+ if (retval)
+ return retval;
+
+ if (data.d0 != 0xccdd)
return -ENODEV;
+ return 0;
+}
- f0000_segment = ioremap_nocache(0xf0000, 0xffff);
- if (!f0000_segment) {
- pr_err("Can't map the segment at 0xf0000\n");
- return -EINVAL;
+static int kbd_backlight_read(struct samsung_laptop *samsung)
+{
+ const struct sabi_commands *commands = &samsung->config->commands;
+ struct sabi_data data;
+ int retval;
+
+ memset(&data, 0, sizeof(data));
+ data.data[0] = 0x81;
+ retval = sabi_command(samsung, commands->kbd_backlight,
+ &data, &data);
+
+ if (retval)
+ return retval;
+
+ return data.data[0];
+}
+
+static int kbd_backlight_write(struct samsung_laptop *samsung, int brightness)
+{
+ const struct sabi_commands *commands = &samsung->config->commands;
+ struct sabi_data data;
+
+ memset(&data, 0, sizeof(data));
+ data.d0 = 0x82 | ((brightness & 0xFF) << 8);
+ return sabi_command(samsung, commands->kbd_backlight,
+ &data, NULL);
+}
+
+static void kbd_led_update(struct work_struct *work)
+{
+ struct samsung_laptop *samsung;
+
+ samsung = container_of(work, struct samsung_laptop, kbd_led_work);
+ kbd_backlight_write(samsung, samsung->kbd_led_wk);
+}
+
+static void kbd_led_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ struct samsung_laptop *samsung;
+
+ samsung = container_of(led_cdev, struct samsung_laptop, kbd_led);
+
+ if (value > samsung->kbd_led.max_brightness)
+ value = samsung->kbd_led.max_brightness;
+ else if (value < 0)
+ value = 0;
+
+ samsung->kbd_led_wk = value;
+ queue_work(samsung->led_workqueue, &samsung->kbd_led_work);
+}
+
+static enum led_brightness kbd_led_get(struct led_classdev *led_cdev)
+{
+ struct samsung_laptop *samsung;
+
+ samsung = container_of(led_cdev, struct samsung_laptop, kbd_led);
+ return kbd_backlight_read(samsung);
+}
+
+static void samsung_leds_exit(struct samsung_laptop *samsung)
+{
+ if (!IS_ERR_OR_NULL(samsung->kbd_led.dev))
+ led_classdev_unregister(&samsung->kbd_led);
+ if (samsung->led_workqueue)
+ destroy_workqueue(samsung->led_workqueue);
+}
+
+static int __init samsung_leds_init(struct samsung_laptop *samsung)
+{
+ int ret = 0;
+
+ samsung->led_workqueue = create_singlethread_workqueue("led_workqueue");
+ if (!samsung->led_workqueue)
+ return -ENOMEM;
+
+ if (kbd_backlight_enable(samsung) >= 0) {
+ INIT_WORK(&samsung->kbd_led_work, kbd_led_update);
+
+ samsung->kbd_led.name = "samsung::kbd_backlight";
+ samsung->kbd_led.brightness_set = kbd_led_set;
+ samsung->kbd_led.brightness_get = kbd_led_get;
+ samsung->kbd_led.max_brightness = 8;
+
+ ret = led_classdev_register(&samsung->platform_device->dev,
+ &samsung->kbd_led);
+ }
+
+ if (ret)
+ samsung_leds_exit(samsung);
+
+ return ret;
+}
+
+static void samsung_backlight_exit(struct samsung_laptop *samsung)
+{
+ if (samsung->backlight_device) {
+ backlight_device_unregister(samsung->backlight_device);
+ samsung->backlight_device = NULL;
+ }
+}
+
+static int __init samsung_backlight_init(struct samsung_laptop *samsung)
+{
+ struct backlight_device *bd;
+ struct backlight_properties props;
+
+ if (!samsung->handle_backlight)
+ return 0;
+
+ memset(&props, 0, sizeof(struct backlight_properties));
+ props.type = BACKLIGHT_PLATFORM;
+ props.max_brightness = samsung->config->max_brightness -
+ samsung->config->min_brightness;
+
+ bd = backlight_device_register("samsung",
+ &samsung->platform_device->dev,
+ samsung, &backlight_ops,
+ &props);
+ if (IS_ERR(bd))
+ return PTR_ERR(bd);
+
+ samsung->backlight_device = bd;
+ samsung->backlight_device->props.brightness = read_brightness(samsung);
+ samsung->backlight_device->props.power = FB_BLANK_UNBLANK;
+ backlight_update_status(samsung->backlight_device);
+
+ return 0;
+}
+
+static umode_t samsung_sysfs_is_visible(struct kobject *kobj,
+ struct attribute *attr, int idx)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct platform_device *pdev = to_platform_device(dev);
+ struct samsung_laptop *samsung = platform_get_drvdata(pdev);
+ bool ok = true;
+
+ if (attr == &dev_attr_performance_level.attr)
+ ok = !!samsung->config->performance_levels[0].name;
+ if (attr == &dev_attr_battery_life_extender.attr)
+ ok = !!(read_battery_life_extender(samsung) >= 0);
+ if (attr == &dev_attr_usb_charge.attr)
+ ok = !!(read_usb_charge(samsung) >= 0);
+
+ return ok ? attr->mode : 0;
+}
+
+static struct attribute_group platform_attribute_group = {
+ .is_visible = samsung_sysfs_is_visible,
+ .attrs = platform_attributes
+};
+
+static void samsung_sysfs_exit(struct samsung_laptop *samsung)
+{
+ struct platform_device *device = samsung->platform_device;
+
+ sysfs_remove_group(&device->dev.kobj, &platform_attribute_group);
+}
+
+static int __init samsung_sysfs_init(struct samsung_laptop *samsung)
+{
+ struct platform_device *device = samsung->platform_device;
+
+ return sysfs_create_group(&device->dev.kobj, &platform_attribute_group);
+
+}
+
+static int show_call(struct seq_file *m, void *data)
+{
+ struct samsung_laptop *samsung = m->private;
+ struct sabi_data *sdata = &samsung->debug.data;
+ int ret;
+
+ seq_printf(m, "SABI 0x%04x {0x%08x, 0x%08x, 0x%04x, 0x%02x}\n",
+ samsung->debug.command,
+ sdata->d0, sdata->d1, sdata->d2, sdata->d3);
+
+ ret = sabi_command(samsung, samsung->debug.command, sdata, sdata);
+
+ if (ret) {
+ seq_printf(m, "SABI command 0x%04x failed\n",
+ samsung->debug.command);
+ return ret;
+ }
+
+ seq_printf(m, "SABI {0x%08x, 0x%08x, 0x%04x, 0x%02x}\n",
+ sdata->d0, sdata->d1, sdata->d2, sdata->d3);
+ return 0;
+}
+
+static int samsung_debugfs_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, show_call, inode->i_private);
+}
+
+static const struct file_operations samsung_laptop_call_io_ops = {
+ .owner = THIS_MODULE,
+ .open = samsung_debugfs_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static void samsung_debugfs_exit(struct samsung_laptop *samsung)
+{
+ debugfs_remove_recursive(samsung->debug.root);
+}
+
+static int samsung_debugfs_init(struct samsung_laptop *samsung)
+{
+ struct dentry *dent;
+
+ samsung->debug.root = debugfs_create_dir("samsung-laptop", NULL);
+ if (!samsung->debug.root) {
+ pr_err("failed to create debugfs directory");
+ goto error_debugfs;
}
+ samsung->debug.f0000_wrapper.data = samsung->f0000_segment;
+ samsung->debug.f0000_wrapper.size = 0xffff;
+
+ samsung->debug.data_wrapper.data = &samsung->debug.data;
+ samsung->debug.data_wrapper.size = sizeof(samsung->debug.data);
+
+ samsung->debug.sdiag_wrapper.data = samsung->sdiag;
+ samsung->debug.sdiag_wrapper.size = strlen(samsung->sdiag);
+
+ dent = debugfs_create_u16("command", S_IRUGO | S_IWUSR,
+ samsung->debug.root, &samsung->debug.command);
+ if (!dent)
+ goto error_debugfs;
+
+ dent = debugfs_create_u32("d0", S_IRUGO | S_IWUSR, samsung->debug.root,
+ &samsung->debug.data.d0);
+ if (!dent)
+ goto error_debugfs;
+
+ dent = debugfs_create_u32("d1", S_IRUGO | S_IWUSR, samsung->debug.root,
+ &samsung->debug.data.d1);
+ if (!dent)
+ goto error_debugfs;
+
+ dent = debugfs_create_u16("d2", S_IRUGO | S_IWUSR, samsung->debug.root,
+ &samsung->debug.data.d2);
+ if (!dent)
+ goto error_debugfs;
+
+ dent = debugfs_create_u8("d3", S_IRUGO | S_IWUSR, samsung->debug.root,
+ &samsung->debug.data.d3);
+ if (!dent)
+ goto error_debugfs;
+
+ dent = debugfs_create_blob("data", S_IRUGO | S_IWUSR,
+ samsung->debug.root,
+ &samsung->debug.data_wrapper);
+ if (!dent)
+ goto error_debugfs;
+
+ dent = debugfs_create_blob("f0000_segment", S_IRUSR | S_IWUSR,
+ samsung->debug.root,
+ &samsung->debug.f0000_wrapper);
+ if (!dent)
+ goto error_debugfs;
+
+ dent = debugfs_create_file("call", S_IFREG | S_IRUGO,
+ samsung->debug.root, samsung,
+ &samsung_laptop_call_io_ops);
+ if (!dent)
+ goto error_debugfs;
+
+ dent = debugfs_create_blob("sdiag", S_IRUGO | S_IWUSR,
+ samsung->debug.root,
+ &samsung->debug.sdiag_wrapper);
+ if (!dent)
+ goto error_debugfs;
+
+ return 0;
+
+error_debugfs:
+ samsung_debugfs_exit(samsung);
+ return -ENOMEM;
+}
+
+static void samsung_sabi_exit(struct samsung_laptop *samsung)
+{
+ const struct sabi_config *config = samsung->config;
+
+ /* Turn off "Linux" mode in the BIOS */
+ if (config && config->commands.set_linux != 0xff)
+ sabi_set_commandb(samsung, config->commands.set_linux, 0x80);
+
+ if (samsung->sabi_iface) {
+ iounmap(samsung->sabi_iface);
+ samsung->sabi_iface = NULL;
+ }
+ if (samsung->f0000_segment) {
+ iounmap(samsung->f0000_segment);
+ samsung->f0000_segment = NULL;
+ }
+
+ samsung->config = NULL;
+}
+
+static __init void samsung_sabi_infos(struct samsung_laptop *samsung, int loca,
+ unsigned int ifaceP)
+{
+ const struct sabi_config *config = samsung->config;
+
+ printk(KERN_DEBUG "This computer supports SABI==%x\n",
+ loca + 0xf0000 - 6);
+
+ printk(KERN_DEBUG "SABI header:\n");
+ printk(KERN_DEBUG " SMI Port Number = 0x%04x\n",
+ readw(samsung->sabi + config->header_offsets.port));
+ printk(KERN_DEBUG " SMI Interface Function = 0x%02x\n",
+ readb(samsung->sabi + config->header_offsets.iface_func));
+ printk(KERN_DEBUG " SMI enable memory buffer = 0x%02x\n",
+ readb(samsung->sabi + config->header_offsets.en_mem));
+ printk(KERN_DEBUG " SMI restore memory buffer = 0x%02x\n",
+ readb(samsung->sabi + config->header_offsets.re_mem));
+ printk(KERN_DEBUG " SABI data offset = 0x%04x\n",
+ readw(samsung->sabi + config->header_offsets.data_offset));
+ printk(KERN_DEBUG " SABI data segment = 0x%04x\n",
+ readw(samsung->sabi + config->header_offsets.data_segment));
+
+ printk(KERN_DEBUG " SABI pointer = 0x%08x\n", ifaceP);
+}
+
+static void __init samsung_sabi_diag(struct samsung_laptop *samsung)
+{
+ int loca = find_signature(samsung->f0000_segment, "SDiaG@");
+ int i;
+
+ if (loca == 0xffff)
+ return ;
+
+ /* Example:
+ * Ident: @SDiaG@686XX-N90X3A/966-SEC-07HL-S90X3A
+ *
+ * Product name: 90X3A
+ * BIOS Version: 07HL
+ */
+ loca += 1;
+ for (i = 0; loca < 0xffff && i < sizeof(samsung->sdiag) - 1; loca++) {
+ char temp = readb(samsung->f0000_segment + loca);
+
+ if (isalnum(temp) || temp == '/' || temp == '-')
+ samsung->sdiag[i++] = temp;
+ else
+ break ;
+ }
+
+ if (debug && samsung->sdiag[0])
+ pr_info("sdiag: %s", samsung->sdiag);
+}
+
+static int __init samsung_sabi_init(struct samsung_laptop *samsung)
+{
+ const struct sabi_config *config = NULL;
+ const struct sabi_commands *commands;
+ unsigned int ifaceP;
+ int ret = 0;
+ int i;
+ int loca;
+
+ samsung->f0000_segment = ioremap_nocache(0xf0000, 0xffff);
+ if (!samsung->f0000_segment) {
+ if (debug || force)
+ pr_err("Can't map the segment at 0xf0000\n");
+ ret = -EINVAL;
+ goto exit;
+ }
+
+ samsung_sabi_diag(samsung);
+
/* Try to find one of the signatures in memory to find the header */
for (i = 0; sabi_configs[i].test_string != 0; ++i) {
- sabi_config = &sabi_configs[i];
- loca = find_signature(f0000_segment, sabi_config->test_string);
+ samsung->config = &sabi_configs[i];
+ loca = find_signature(samsung->f0000_segment,
+ samsung->config->test_string);
if (loca != 0xffff)
break;
}
if (loca == 0xffff) {
- pr_err("This computer does not support SABI\n");
- goto error_no_signature;
+ if (debug || force)
+ pr_err("This computer does not support SABI\n");
+ ret = -ENODEV;
+ goto exit;
}
+ config = samsung->config;
+ commands = &config->commands;
+
/* point to the SMI port Number */
loca += 1;
- sabi = (f0000_segment + loca);
-
- if (debug) {
- printk(KERN_DEBUG "This computer supports SABI==%x\n",
- loca + 0xf0000 - 6);
- printk(KERN_DEBUG "SABI header:\n");
- printk(KERN_DEBUG " SMI Port Number = 0x%04x\n",
- readw(sabi + sabi_config->header_offsets.port));
- printk(KERN_DEBUG " SMI Interface Function = 0x%02x\n",
- readb(sabi + sabi_config->header_offsets.iface_func));
- printk(KERN_DEBUG " SMI enable memory buffer = 0x%02x\n",
- readb(sabi + sabi_config->header_offsets.en_mem));
- printk(KERN_DEBUG " SMI restore memory buffer = 0x%02x\n",
- readb(sabi + sabi_config->header_offsets.re_mem));
- printk(KERN_DEBUG " SABI data offset = 0x%04x\n",
- readw(sabi + sabi_config->header_offsets.data_offset));
- printk(KERN_DEBUG " SABI data segment = 0x%04x\n",
- readw(sabi + sabi_config->header_offsets.data_segment));
- }
+ samsung->sabi = (samsung->f0000_segment + loca);
/* Get a pointer to the SABI Interface */
- ifaceP = (readw(sabi + sabi_config->header_offsets.data_segment) & 0x0ffff) << 4;
- ifaceP += readw(sabi + sabi_config->header_offsets.data_offset) & 0x0ffff;
- sabi_iface = ioremap_nocache(ifaceP, 16);
- if (!sabi_iface) {
- pr_err("Can't remap %x\n", ifaceP);
- goto error_no_signature;
- }
- if (debug) {
- printk(KERN_DEBUG "ifaceP = 0x%08x\n", ifaceP);
- printk(KERN_DEBUG "sabi_iface = %p\n", sabi_iface);
+ ifaceP = (readw(samsung->sabi + config->header_offsets.data_segment) & 0x0ffff) << 4;
+ ifaceP += readw(samsung->sabi + config->header_offsets.data_offset) & 0x0ffff;
- test_backlight();
- test_wireless();
+ if (debug)
+ samsung_sabi_infos(samsung, loca, ifaceP);
- retval = sabi_get_command(sabi_config->commands.get_brightness,
- &sretval);
- printk(KERN_DEBUG "brightness = 0x%02x\n", sretval.retval[0]);
+ samsung->sabi_iface = ioremap_nocache(ifaceP, 16);
+ if (!samsung->sabi_iface) {
+ pr_err("Can't remap %x\n", ifaceP);
+ ret = -EINVAL;
+ goto exit;
}
/* Turn on "Linux" mode in the BIOS */
- if (sabi_config->commands.set_linux != 0xff) {
- retval = sabi_set_command(sabi_config->commands.set_linux,
- 0x81);
+ if (commands->set_linux != 0xff) {
+ int retval = sabi_set_commandb(samsung,
+ commands->set_linux, 0x81);
if (retval) {
pr_warn("Linux mode was not set!\n");
- goto error_no_platform;
+ ret = -ENODEV;
+ goto exit;
}
}
/* Check for stepping quirk */
- check_for_stepping_quirk();
+ if (samsung->handle_backlight)
+ check_for_stepping_quirk(samsung);
- /* knock up a platform device to hang stuff off of */
- sdev = platform_device_register_simple("samsung", -1, NULL, 0);
- if (IS_ERR(sdev))
- goto error_no_platform;
+ pr_info("detected SABI interface: %s\n",
+ samsung->config->test_string);
- /* create a backlight device to talk to this one */
- memset(&props, 0, sizeof(struct backlight_properties));
- props.type = BACKLIGHT_PLATFORM;
- props.max_brightness = sabi_config->max_brightness -
- sabi_config->min_brightness;
- backlight_device = backlight_device_register("samsung", &sdev->dev,
- NULL, &backlight_ops,
- &props);
- if (IS_ERR(backlight_device))
- goto error_no_backlight;
-
- backlight_device->props.brightness = read_brightness();
- backlight_device->props.power = FB_BLANK_UNBLANK;
- backlight_update_status(backlight_device);
-
- retval = init_wireless(sdev);
- if (retval)
- goto error_no_rfk;
+exit:
+ if (ret)
+ samsung_sabi_exit(samsung);
- retval = device_create_file(&sdev->dev, &dev_attr_performance_level);
- if (retval)
- goto error_file_create;
+ return ret;
+}
+
+static void samsung_platform_exit(struct samsung_laptop *samsung)
+{
+ if (samsung->platform_device) {
+ platform_device_unregister(samsung->platform_device);
+ samsung->platform_device = NULL;
+ }
+}
+
+static int __init samsung_platform_init(struct samsung_laptop *samsung)
+{
+ struct platform_device *pdev;
+ pdev = platform_device_register_simple("samsung", -1, NULL, 0);
+ if (IS_ERR(pdev))
+ return PTR_ERR(pdev);
+
+ samsung->platform_device = pdev;
+ platform_set_drvdata(samsung->platform_device, samsung);
return 0;
+}
-error_file_create:
- destroy_wireless();
+static struct samsung_quirks *quirks;
-error_no_rfk:
- backlight_device_unregister(backlight_device);
+static int __init samsung_dmi_matched(const struct dmi_system_id *d)
+{
+ quirks = d->driver_data;
+ return 0;
+}
-error_no_backlight:
- platform_device_unregister(sdev);
+static struct dmi_system_id __initdata samsung_dmi_table[] = {
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR,
+ "SAMSUNG ELECTRONICS CO., LTD."),
+ DMI_MATCH(DMI_CHASSIS_TYPE, "8"), /* Portable */
+ },
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR,
+ "SAMSUNG ELECTRONICS CO., LTD."),
+ DMI_MATCH(DMI_CHASSIS_TYPE, "9"), /* Laptop */
+ },
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR,
+ "SAMSUNG ELECTRONICS CO., LTD."),
+ DMI_MATCH(DMI_CHASSIS_TYPE, "10"), /* Notebook */
+ },
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR,
+ "SAMSUNG ELECTRONICS CO., LTD."),
+ DMI_MATCH(DMI_CHASSIS_TYPE, "14"), /* Sub-Notebook */
+ },
+ },
+ /* Specific DMI ids for laptop with quirks */
+ {
+ .callback = samsung_dmi_matched,
+ .ident = "N150P",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "N150P"),
+ DMI_MATCH(DMI_BOARD_NAME, "N150P"),
+ },
+ .driver_data = &samsung_broken_acpi_video,
+ },
+ {
+ .callback = samsung_dmi_matched,
+ .ident = "N145P/N250P/N260P",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "N145P/N250P/N260P"),
+ DMI_MATCH(DMI_BOARD_NAME, "N145P/N250P/N260P"),
+ },
+ .driver_data = &samsung_broken_acpi_video,
+ },
+ {
+ .callback = samsung_dmi_matched,
+ .ident = "N150/N210/N220",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "N150/N210/N220"),
+ DMI_MATCH(DMI_BOARD_NAME, "N150/N210/N220"),
+ },
+ .driver_data = &samsung_broken_acpi_video,
+ },
+ {
+ .callback = samsung_dmi_matched,
+ .ident = "NF110/NF210/NF310",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "NF110/NF210/NF310"),
+ DMI_MATCH(DMI_BOARD_NAME, "NF110/NF210/NF310"),
+ },
+ .driver_data = &samsung_broken_acpi_video,
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(dmi, samsung_dmi_table);
+
+static struct platform_device *samsung_platform_device;
+
+static int __init samsung_init(void)
+{
+ struct samsung_laptop *samsung;
+ int ret;
+
+ quirks = &samsung_unknown;
+ if (!force && !dmi_check_system(samsung_dmi_table))
+ return -ENODEV;
+
+ samsung = kzalloc(sizeof(*samsung), GFP_KERNEL);
+ if (!samsung)
+ return -ENOMEM;
+
+ mutex_init(&samsung->sabi_mutex);
+ samsung->handle_backlight = true;
+ samsung->quirks = quirks;
-error_no_platform:
- iounmap(sabi_iface);
-error_no_signature:
- iounmap(f0000_segment);
- return -EINVAL;
+#if (defined CONFIG_ACPI_VIDEO || defined CONFIG_ACPI_VIDEO_MODULE)
+ /* Don't handle backlight here if the acpi video already handle it */
+ if (acpi_video_backlight_support()) {
+ if (samsung->quirks->broken_acpi_video) {
+ pr_info("Disabling ACPI video driver\n");
+ acpi_video_unregister();
+ } else {
+ samsung->handle_backlight = false;
+ }
+ }
+#endif
+
+ ret = samsung_platform_init(samsung);
+ if (ret)
+ goto error_platform;
+
+ ret = samsung_sabi_init(samsung);
+ if (ret)
+ goto error_sabi;
+
+#ifdef CONFIG_ACPI
+ /* Only log that if we are really on a sabi platform */
+ if (acpi_video_backlight_support() &&
+ !samsung->quirks->broken_acpi_video)
+ pr_info("Backlight controlled by ACPI video driver\n");
+#endif
+
+ ret = samsung_sysfs_init(samsung);
+ if (ret)
+ goto error_sysfs;
+
+ ret = samsung_backlight_init(samsung);
+ if (ret)
+ goto error_backlight;
+
+ ret = samsung_rfkill_init(samsung);
+ if (ret)
+ goto error_rfkill;
+
+ ret = samsung_leds_init(samsung);
+ if (ret)
+ goto error_leds;
+
+ ret = samsung_debugfs_init(samsung);
+ if (ret)
+ goto error_debugfs;
+
+ samsung_platform_device = samsung->platform_device;
+ return ret;
+
+error_debugfs:
+ samsung_leds_exit(samsung);
+error_leds:
+ samsung_rfkill_exit(samsung);
+error_rfkill:
+ samsung_backlight_exit(samsung);
+error_backlight:
+ samsung_sysfs_exit(samsung);
+error_sysfs:
+ samsung_sabi_exit(samsung);
+error_sabi:
+ samsung_platform_exit(samsung);
+error_platform:
+ kfree(samsung);
+ return ret;
}
static void __exit samsung_exit(void)
{
- /* Turn off "Linux" mode in the BIOS */
- if (sabi_config->commands.set_linux != 0xff)
- sabi_set_command(sabi_config->commands.set_linux, 0x80);
-
- device_remove_file(&sdev->dev, &dev_attr_performance_level);
- backlight_device_unregister(backlight_device);
- destroy_wireless();
- iounmap(sabi_iface);
- iounmap(f0000_segment);
- platform_device_unregister(sdev);
+ struct samsung_laptop *samsung;
+
+ samsung = platform_get_drvdata(samsung_platform_device);
+
+ samsung_debugfs_exit(samsung);
+ samsung_leds_exit(samsung);
+ samsung_rfkill_exit(samsung);
+ samsung_backlight_exit(samsung);
+ samsung_sysfs_exit(samsung);
+ samsung_sabi_exit(samsung);
+ samsung_platform_exit(samsung);
+
+ kfree(samsung);
+ samsung_platform_device = NULL;
}
module_init(samsung_init);
projects / karo-tx-linux.git / blobdiff