static LIST_HEAD(regulator_list);
static LIST_HEAD(regulator_map_list);
-/**
+/*
* struct regulator_dev
*
* Voltage / Current regulator class device. One for each regulator.
void *reg_data; /* regulator_dev data */
};
-/**
+/*
* struct regulator_map
*
* Used to provide symbolic supply names to devices.
int uA_load;
int min_uV;
int max_uV;
- int enabled; /* client has called enabled */
+ int enabled; /* count of client enables */
char *supply_name;
struct device_attribute dev_attr;
struct regulator_dev *rdev;
/* operating mode constraint check */
static int regulator_check_mode(struct regulator_dev *rdev, int mode)
{
+ switch (mode) {
+ case REGULATOR_MODE_FAST:
+ case REGULATOR_MODE_NORMAL:
+ case REGULATOR_MODE_IDLE:
+ case REGULATOR_MODE_STANDBY:
+ break;
+ default:
+ return -EINVAL;
+ }
+
if (!rdev->constraints) {
printk(KERN_ERR "%s: no constraints for %s\n", __func__,
rdev->desc->name);
return ret;
}
+static DEVICE_ATTR(microvolts, 0444, regulator_uV_show, NULL);
static ssize_t regulator_uA_show(struct device *dev,
struct device_attribute *attr, char *buf)
return sprintf(buf, "%d\n", _regulator_get_current_limit(rdev));
}
+static DEVICE_ATTR(microamps, 0444, regulator_uA_show, NULL);
static ssize_t regulator_name_show(struct device *dev,
struct device_attribute *attr, char *buf)
return sprintf(buf, "%s\n", name);
}
-static ssize_t regulator_opmode_show(struct device *dev,
- struct device_attribute *attr, char *buf)
+static ssize_t regulator_print_opmode(char *buf, int mode)
{
- struct regulator_dev *rdev = dev_get_drvdata(dev);
- int mode = _regulator_get_mode(rdev);
-
switch (mode) {
case REGULATOR_MODE_FAST:
return sprintf(buf, "fast\n");
return sprintf(buf, "unknown\n");
}
-static ssize_t regulator_state_show(struct device *dev,
- struct device_attribute *attr, char *buf)
+static ssize_t regulator_opmode_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
struct regulator_dev *rdev = dev_get_drvdata(dev);
- int state = _regulator_is_enabled(rdev);
+ return regulator_print_opmode(buf, _regulator_get_mode(rdev));
+}
+static DEVICE_ATTR(opmode, 0444, regulator_opmode_show, NULL);
+
+static ssize_t regulator_print_state(char *buf, int state)
+{
if (state > 0)
return sprintf(buf, "enabled\n");
else if (state == 0)
return sprintf(buf, "unknown\n");
}
+static ssize_t regulator_state_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct regulator_dev *rdev = dev_get_drvdata(dev);
+
+ return regulator_print_state(buf, _regulator_is_enabled(rdev));
+}
+static DEVICE_ATTR(state, 0444, regulator_state_show, NULL);
+
+static ssize_t regulator_status_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct regulator_dev *rdev = dev_get_drvdata(dev);
+ int status;
+ char *label;
+
+ status = rdev->desc->ops->get_status(rdev);
+ if (status < 0)
+ return status;
+
+ switch (status) {
+ case REGULATOR_STATUS_OFF:
+ label = "off";
+ break;
+ case REGULATOR_STATUS_ON:
+ label = "on";
+ break;
+ case REGULATOR_STATUS_ERROR:
+ label = "error";
+ break;
+ case REGULATOR_STATUS_FAST:
+ label = "fast";
+ break;
+ case REGULATOR_STATUS_NORMAL:
+ label = "normal";
+ break;
+ case REGULATOR_STATUS_IDLE:
+ label = "idle";
+ break;
+ case REGULATOR_STATUS_STANDBY:
+ label = "standby";
+ break;
+ default:
+ return -ERANGE;
+ }
+
+ return sprintf(buf, "%s\n", label);
+}
+static DEVICE_ATTR(status, 0444, regulator_status_show, NULL);
+
static ssize_t regulator_min_uA_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
return sprintf(buf, "%d\n", rdev->constraints->min_uA);
}
+static DEVICE_ATTR(min_microamps, 0444, regulator_min_uA_show, NULL);
static ssize_t regulator_max_uA_show(struct device *dev,
struct device_attribute *attr, char *buf)
return sprintf(buf, "%d\n", rdev->constraints->max_uA);
}
+static DEVICE_ATTR(max_microamps, 0444, regulator_max_uA_show, NULL);
static ssize_t regulator_min_uV_show(struct device *dev,
struct device_attribute *attr, char *buf)
return sprintf(buf, "%d\n", rdev->constraints->min_uV);
}
+static DEVICE_ATTR(min_microvolts, 0444, regulator_min_uV_show, NULL);
static ssize_t regulator_max_uV_show(struct device *dev,
struct device_attribute *attr, char *buf)
return sprintf(buf, "%d\n", rdev->constraints->max_uV);
}
+static DEVICE_ATTR(max_microvolts, 0444, regulator_max_uV_show, NULL);
static ssize_t regulator_total_uA_show(struct device *dev,
struct device_attribute *attr, char *buf)
mutex_unlock(&rdev->mutex);
return sprintf(buf, "%d\n", uA);
}
+static DEVICE_ATTR(requested_microamps, 0444, regulator_total_uA_show, NULL);
static ssize_t regulator_num_users_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct regulator_dev *rdev = dev_get_drvdata(dev);
- if (!rdev->constraints)
- return sprintf(buf, "not defined\n");
return sprintf(buf, "%d\n", rdev->constraints->state_mem.uV);
}
+static DEVICE_ATTR(suspend_mem_microvolts, 0444,
+ regulator_suspend_mem_uV_show, NULL);
static ssize_t regulator_suspend_disk_uV_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct regulator_dev *rdev = dev_get_drvdata(dev);
- if (!rdev->constraints)
- return sprintf(buf, "not defined\n");
return sprintf(buf, "%d\n", rdev->constraints->state_disk.uV);
}
+static DEVICE_ATTR(suspend_disk_microvolts, 0444,
+ regulator_suspend_disk_uV_show, NULL);
static ssize_t regulator_suspend_standby_uV_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct regulator_dev *rdev = dev_get_drvdata(dev);
- if (!rdev->constraints)
- return sprintf(buf, "not defined\n");
return sprintf(buf, "%d\n", rdev->constraints->state_standby.uV);
}
-
-static ssize_t suspend_opmode_show(struct regulator_dev *rdev,
- unsigned int mode, char *buf)
-{
- switch (mode) {
- case REGULATOR_MODE_FAST:
- return sprintf(buf, "fast\n");
- case REGULATOR_MODE_NORMAL:
- return sprintf(buf, "normal\n");
- case REGULATOR_MODE_IDLE:
- return sprintf(buf, "idle\n");
- case REGULATOR_MODE_STANDBY:
- return sprintf(buf, "standby\n");
- }
- return sprintf(buf, "unknown\n");
-}
+static DEVICE_ATTR(suspend_standby_microvolts, 0444,
+ regulator_suspend_standby_uV_show, NULL);
static ssize_t regulator_suspend_mem_mode_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct regulator_dev *rdev = dev_get_drvdata(dev);
- if (!rdev->constraints)
- return sprintf(buf, "not defined\n");
- return suspend_opmode_show(rdev,
- rdev->constraints->state_mem.mode, buf);
+ return regulator_print_opmode(buf,
+ rdev->constraints->state_mem.mode);
}
+static DEVICE_ATTR(suspend_mem_mode, 0444,
+ regulator_suspend_mem_mode_show, NULL);
static ssize_t regulator_suspend_disk_mode_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct regulator_dev *rdev = dev_get_drvdata(dev);
- if (!rdev->constraints)
- return sprintf(buf, "not defined\n");
- return suspend_opmode_show(rdev,
- rdev->constraints->state_disk.mode, buf);
+ return regulator_print_opmode(buf,
+ rdev->constraints->state_disk.mode);
}
+static DEVICE_ATTR(suspend_disk_mode, 0444,
+ regulator_suspend_disk_mode_show, NULL);
static ssize_t regulator_suspend_standby_mode_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct regulator_dev *rdev = dev_get_drvdata(dev);
- if (!rdev->constraints)
- return sprintf(buf, "not defined\n");
- return suspend_opmode_show(rdev,
- rdev->constraints->state_standby.mode, buf);
+ return regulator_print_opmode(buf,
+ rdev->constraints->state_standby.mode);
}
+static DEVICE_ATTR(suspend_standby_mode, 0444,
+ regulator_suspend_standby_mode_show, NULL);
static ssize_t regulator_suspend_mem_state_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct regulator_dev *rdev = dev_get_drvdata(dev);
- if (!rdev->constraints)
- return sprintf(buf, "not defined\n");
-
- if (rdev->constraints->state_mem.enabled)
- return sprintf(buf, "enabled\n");
- else
- return sprintf(buf, "disabled\n");
+ return regulator_print_state(buf,
+ rdev->constraints->state_mem.enabled);
}
+static DEVICE_ATTR(suspend_mem_state, 0444,
+ regulator_suspend_mem_state_show, NULL);
static ssize_t regulator_suspend_disk_state_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct regulator_dev *rdev = dev_get_drvdata(dev);
- if (!rdev->constraints)
- return sprintf(buf, "not defined\n");
-
- if (rdev->constraints->state_disk.enabled)
- return sprintf(buf, "enabled\n");
- else
- return sprintf(buf, "disabled\n");
+ return regulator_print_state(buf,
+ rdev->constraints->state_disk.enabled);
}
+static DEVICE_ATTR(suspend_disk_state, 0444,
+ regulator_suspend_disk_state_show, NULL);
static ssize_t regulator_suspend_standby_state_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct regulator_dev *rdev = dev_get_drvdata(dev);
- if (!rdev->constraints)
- return sprintf(buf, "not defined\n");
-
- if (rdev->constraints->state_standby.enabled)
- return sprintf(buf, "enabled\n");
- else
- return sprintf(buf, "disabled\n");
+ return regulator_print_state(buf,
+ rdev->constraints->state_standby.enabled);
}
+static DEVICE_ATTR(suspend_standby_state, 0444,
+ regulator_suspend_standby_state_show, NULL);
+
+/*
+ * These are the only attributes are present for all regulators.
+ * Other attributes are a function of regulator functionality.
+ */
static struct device_attribute regulator_dev_attrs[] = {
__ATTR(name, 0444, regulator_name_show, NULL),
- __ATTR(microvolts, 0444, regulator_uV_show, NULL),
- __ATTR(microamps, 0444, regulator_uA_show, NULL),
- __ATTR(opmode, 0444, regulator_opmode_show, NULL),
- __ATTR(state, 0444, regulator_state_show, NULL),
- __ATTR(min_microvolts, 0444, regulator_min_uV_show, NULL),
- __ATTR(min_microamps, 0444, regulator_min_uA_show, NULL),
- __ATTR(max_microvolts, 0444, regulator_max_uV_show, NULL),
- __ATTR(max_microamps, 0444, regulator_max_uA_show, NULL),
- __ATTR(requested_microamps, 0444, regulator_total_uA_show, NULL),
__ATTR(num_users, 0444, regulator_num_users_show, NULL),
__ATTR(type, 0444, regulator_type_show, NULL),
- __ATTR(suspend_mem_microvolts, 0444,
- regulator_suspend_mem_uV_show, NULL),
- __ATTR(suspend_disk_microvolts, 0444,
- regulator_suspend_disk_uV_show, NULL),
- __ATTR(suspend_standby_microvolts, 0444,
- regulator_suspend_standby_uV_show, NULL),
- __ATTR(suspend_mem_mode, 0444,
- regulator_suspend_mem_mode_show, NULL),
- __ATTR(suspend_disk_mode, 0444,
- regulator_suspend_disk_mode_show, NULL),
- __ATTR(suspend_standby_mode, 0444,
- regulator_suspend_standby_mode_show, NULL),
- __ATTR(suspend_mem_state, 0444,
- regulator_suspend_mem_state_show, NULL),
- __ATTR(suspend_disk_state, 0444,
- regulator_suspend_disk_state_show, NULL),
- __ATTR(suspend_standby_state, 0444,
- regulator_suspend_standby_state_show, NULL),
__ATTR_NULL,
};
/**
* set_machine_constraints - sets regulator constraints
- * @regulator: regulator source
+ * @rdev: regulator source
+ * @constraints: constraints to apply
*
* Allows platform initialisation code to define and constrain
* regulator circuits e.g. valid voltage/current ranges, etc. NOTE:
/**
* set_supply - set regulator supply regulator
- * @regulator: regulator name
- * @supply: supply regulator name
+ * @rdev: regulator name
+ * @supply_rdev: supply regulator name
*
* Called by platform initialisation code to set the supply regulator for this
* regulator. This ensures that a regulators supply will also be enabled by the
/**
* set_consumer_device_supply: Bind a regulator to a symbolic supply
- * @regulator: regulator source
- * @dev: device the supply applies to
- * @supply: symbolic name for supply
+ * @rdev: regulator source
+ * @consumer_dev: device the supply applies to
+ * @supply: symbolic name for supply
*
* Allows platform initialisation code to map physical regulator
* sources to symbolic names for supplies for use by devices. Devices
if (supply == NULL)
return -EINVAL;
+ list_for_each_entry(node, ®ulator_map_list, list) {
+ if (consumer_dev != node->dev)
+ continue;
+ if (strcmp(node->supply, supply) != 0)
+ continue;
+
+ dev_dbg(consumer_dev, "%s/%s is '%s' supply; fail %s/%s\n",
+ dev_name(&node->regulator->dev),
+ node->regulator->desc->name,
+ supply,
+ dev_name(&rdev->dev), rdev->desc->name);
+ return -EBUSY;
+ }
+
node = kmalloc(sizeof(struct regulator_map), GFP_KERNEL);
if (node == NULL)
return -ENOMEM;
if (regulator == NULL || IS_ERR(regulator))
return;
- if (regulator->enabled) {
- printk(KERN_WARNING "Releasing supply %s while enabled\n",
- regulator->supply_name);
- WARN_ON(regulator->enabled);
- regulator_disable(regulator);
- }
-
mutex_lock(®ulator_list_mutex);
rdev = regulator->rdev;
+ if (WARN(regulator->enabled, "Releasing supply %s while enabled\n",
+ regulator->supply_name))
+ _regulator_disable(rdev);
+
/* remove any sysfs entries */
if (regulator->dev) {
sysfs_remove_link(&rdev->dev.kobj, regulator->supply_name);
* regulator_enable - enable regulator output
* @regulator: regulator source
*
- * Enable the regulator output at the predefined voltage or current value.
+ * Request that the regulator be enabled with the regulator output at
+ * the predefined voltage or current value. Calls to regulator_enable()
+ * must be balanced with calls to regulator_disable().
+ *
* NOTE: the output value can be set by other drivers, boot loader or may be
* hardwired in the regulator.
- * NOTE: calls to regulator_enable() must be balanced with calls to
- * regulator_disable().
*/
int regulator_enable(struct regulator *regulator)
{
- int ret;
-
- if (regulator->enabled) {
- printk(KERN_CRIT "Regulator %s already enabled\n",
- regulator->supply_name);
- WARN_ON(regulator->enabled);
- return 0;
- }
+ struct regulator_dev *rdev = regulator->rdev;
+ int ret = 0;
- mutex_lock(®ulator->rdev->mutex);
- regulator->enabled = 1;
- ret = _regulator_enable(regulator->rdev);
- if (ret != 0)
- regulator->enabled = 0;
- mutex_unlock(®ulator->rdev->mutex);
+ mutex_lock(&rdev->mutex);
+ if (regulator->enabled == 0)
+ ret = _regulator_enable(rdev);
+ else if (regulator->enabled < 0)
+ ret = -EIO;
+ if (ret == 0)
+ regulator->enabled++;
+ mutex_unlock(&rdev->mutex);
return ret;
}
EXPORT_SYMBOL_GPL(regulator_enable);
* regulator_disable - disable regulator output
* @regulator: regulator source
*
- * Disable the regulator output voltage or current.
- * NOTE: this will only disable the regulator output if no other consumer
- * devices have it enabled.
- * NOTE: calls to regulator_enable() must be balanced with calls to
+ * Disable the regulator output voltage or current. Calls to
+ * regulator_enable() must be balanced with calls to
* regulator_disable().
+ *
+ * NOTE: this will only disable the regulator output if no other consumer
+ * devices have it enabled, the regulator device supports disabling and
+ * machine constraints permit this operation.
*/
int regulator_disable(struct regulator *regulator)
{
- int ret;
-
- if (!regulator->enabled) {
- printk(KERN_ERR "%s: not in use by this consumer\n",
- __func__);
- return 0;
- }
+ struct regulator_dev *rdev = regulator->rdev;
+ int ret = 0;
- mutex_lock(®ulator->rdev->mutex);
- regulator->enabled = 0;
- regulator->uA_load = 0;
- ret = _regulator_disable(regulator->rdev);
- mutex_unlock(®ulator->rdev->mutex);
+ mutex_lock(&rdev->mutex);
+ if (regulator->enabled == 1) {
+ ret = _regulator_disable(rdev);
+ if (ret == 0)
+ regulator->uA_load = 0;
+ } else if (WARN(regulator->enabled <= 0,
+ "unbalanced disables for supply %s\n",
+ regulator->supply_name))
+ ret = -EIO;
+ if (ret == 0)
+ regulator->enabled--;
+ mutex_unlock(&rdev->mutex);
return ret;
}
EXPORT_SYMBOL_GPL(regulator_disable);
* regulator_is_enabled - is the regulator output enabled
* @regulator: regulator source
*
- * Returns zero for disabled otherwise return number of enable requests.
+ * Returns positive if the regulator driver backing the source/client
+ * has requested that the device be enabled, zero if it hasn't, else a
+ * negative errno code.
+ *
+ * Note that the device backing this regulator handle can have multiple
+ * users, so it might be enabled even if regulator_enable() was never
+ * called for this particular source.
*/
int regulator_is_enabled(struct regulator *regulator)
{
*
* NOTE: If the regulator is shared between several devices then the lowest
* request voltage that meets the system constraints will be used.
- * NOTE: Regulator system constraints must be set for this regulator before
+ * Regulator system constraints must be set for this regulator before
* calling this function otherwise this call will fail.
*/
int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV)
ret = rdev->desc->ops->set_voltage(rdev, min_uV, max_uV);
out:
+ _notifier_call_chain(rdev, REGULATOR_EVENT_VOLTAGE_CHANGE, NULL);
mutex_unlock(&rdev->mutex);
return ret;
}
mode = rdev->desc->ops->get_optimum_mode(rdev,
input_uV, output_uV,
total_uA_load);
- if (ret <= 0) {
+ ret = regulator_check_mode(rdev, mode);
+ if (ret < 0) {
printk(KERN_ERR "%s: failed to get optimum mode for %s @"
" %d uA %d -> %d uV\n", __func__, rdev->desc->name,
total_uA_load, input_uV, output_uV);
}
ret = rdev->desc->ops->set_mode(rdev, mode);
- if (ret <= 0) {
+ if (ret < 0) {
printk(KERN_ERR "%s: failed to set optimum mode %x for %s\n",
__func__, mode, rdev->desc->name);
goto out;
/**
* regulator_register_notifier - register regulator event notifier
* @regulator: regulator source
- * @notifier_block: notifier block
+ * @nb: notifier block
*
* Register notifier block to receive regulator events.
*/
/**
* regulator_unregister_notifier - unregister regulator event notifier
* @regulator: regulator source
- * @notifier_block: notifier block
+ * @nb: notifier block
*
* Unregister regulator event notifier block.
*/
}
EXPORT_SYMBOL_GPL(regulator_unregister_notifier);
-/* notify regulator consumers and downstream regulator consumers */
+/* notify regulator consumers and downstream regulator consumers.
+ * Note mutex must be held by caller.
+ */
static void _notifier_call_chain(struct regulator_dev *rdev,
unsigned long event, void *data)
{
struct regulator_dev *_rdev;
/* call rdev chain first */
- mutex_lock(&rdev->mutex);
blocking_notifier_call_chain(&rdev->notifier, event, NULL);
- mutex_unlock(&rdev->mutex);
/* now notify regulator we supply */
- list_for_each_entry(_rdev, &rdev->supply_list, slist)
- _notifier_call_chain(_rdev, event, data);
+ list_for_each_entry(_rdev, &rdev->supply_list, slist) {
+ mutex_lock(&_rdev->mutex);
+ _notifier_call_chain(_rdev, event, data);
+ mutex_unlock(&_rdev->mutex);
+ }
}
/**
/**
* regulator_notifier_call_chain - call regulator event notifier
- * @regulator: regulator source
+ * @rdev: regulator source
* @event: notifier block
- * @data:
+ * @data: callback-specific data.
*
* Called by regulator drivers to notify clients a regulator event has
* occurred. We also notify regulator clients downstream.
+ * Note lock must be held by caller.
*/
int regulator_notifier_call_chain(struct regulator_dev *rdev,
unsigned long event, void *data)
}
EXPORT_SYMBOL_GPL(regulator_notifier_call_chain);
+/*
+ * To avoid cluttering sysfs (and memory) with useless state, only
+ * create attributes that can be meaningfully displayed.
+ */
+static int add_regulator_attributes(struct regulator_dev *rdev)
+{
+ struct device *dev = &rdev->dev;
+ struct regulator_ops *ops = rdev->desc->ops;
+ int status = 0;
+
+ /* some attributes need specific methods to be displayed */
+ if (ops->get_voltage) {
+ status = device_create_file(dev, &dev_attr_microvolts);
+ if (status < 0)
+ return status;
+ }
+ if (ops->get_current_limit) {
+ status = device_create_file(dev, &dev_attr_microamps);
+ if (status < 0)
+ return status;
+ }
+ if (ops->get_mode) {
+ status = device_create_file(dev, &dev_attr_opmode);
+ if (status < 0)
+ return status;
+ }
+ if (ops->is_enabled) {
+ status = device_create_file(dev, &dev_attr_state);
+ if (status < 0)
+ return status;
+ }
+ if (ops->get_status) {
+ status = device_create_file(dev, &dev_attr_status);
+ if (status < 0)
+ return status;
+ }
+
+ /* some attributes are type-specific */
+ if (rdev->desc->type == REGULATOR_CURRENT) {
+ status = device_create_file(dev, &dev_attr_requested_microamps);
+ if (status < 0)
+ return status;
+ }
+
+ /* all the other attributes exist to support constraints;
+ * don't show them if there are no constraints, or if the
+ * relevant supporting methods are missing.
+ */
+ if (!rdev->constraints)
+ return status;
+
+ /* constraints need specific supporting methods */
+ if (ops->set_voltage) {
+ status = device_create_file(dev, &dev_attr_min_microvolts);
+ if (status < 0)
+ return status;
+ status = device_create_file(dev, &dev_attr_max_microvolts);
+ if (status < 0)
+ return status;
+ }
+ if (ops->set_current_limit) {
+ status = device_create_file(dev, &dev_attr_min_microamps);
+ if (status < 0)
+ return status;
+ status = device_create_file(dev, &dev_attr_max_microamps);
+ if (status < 0)
+ return status;
+ }
+
+ /* suspend mode constraints need multiple supporting methods */
+ if (!(ops->set_suspend_enable && ops->set_suspend_disable))
+ return status;
+
+ status = device_create_file(dev, &dev_attr_suspend_standby_state);
+ if (status < 0)
+ return status;
+ status = device_create_file(dev, &dev_attr_suspend_mem_state);
+ if (status < 0)
+ return status;
+ status = device_create_file(dev, &dev_attr_suspend_disk_state);
+ if (status < 0)
+ return status;
+
+ if (ops->set_suspend_voltage) {
+ status = device_create_file(dev,
+ &dev_attr_suspend_standby_microvolts);
+ if (status < 0)
+ return status;
+ status = device_create_file(dev,
+ &dev_attr_suspend_mem_microvolts);
+ if (status < 0)
+ return status;
+ status = device_create_file(dev,
+ &dev_attr_suspend_disk_microvolts);
+ if (status < 0)
+ return status;
+ }
+
+ if (ops->set_suspend_mode) {
+ status = device_create_file(dev,
+ &dev_attr_suspend_standby_mode);
+ if (status < 0)
+ return status;
+ status = device_create_file(dev,
+ &dev_attr_suspend_mem_mode);
+ if (status < 0)
+ return status;
+ status = device_create_file(dev,
+ &dev_attr_suspend_disk_mode);
+ if (status < 0)
+ return status;
+ }
+
+ return status;
+}
+
/**
* regulator_register - register regulator
- * @regulator: regulator source
- * @reg_data: private regulator data
+ * @regulator_desc: regulator to register
+ * @dev: struct device for the regulator
+ * @init_data: platform provided init data, passed through by driver
+ * @driver_data: private regulator data
*
* Called by regulator drivers to register a regulator.
* Returns 0 on success.
*/
struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
- struct device *dev, void *driver_data)
+ struct device *dev, struct regulator_init_data *init_data,
+ void *driver_data)
{
static atomic_t regulator_no = ATOMIC_INIT(0);
struct regulator_dev *rdev;
- struct regulator_init_data *init_data = dev->platform_data;
int ret, i;
if (regulator_desc == NULL)
/* preform any regulator specific init */
if (init_data->regulator_init) {
ret = init_data->regulator_init(rdev->reg_data);
- if (ret < 0) {
- kfree(rdev);
- rdev = ERR_PTR(ret);
- goto out;
- }
- }
-
- /* set regulator constraints */
- ret = set_machine_constraints(rdev, &init_data->constraints);
- if (ret < 0) {
- kfree(rdev);
- rdev = ERR_PTR(ret);
- goto out;
+ if (ret < 0)
+ goto clean;
}
/* register with sysfs */
rdev->dev.class = ®ulator_class;
rdev->dev.parent = dev;
- snprintf(rdev->dev.bus_id, sizeof(rdev->dev.bus_id),
- "regulator.%d", atomic_inc_return(®ulator_no) - 1);
+ dev_set_name(&rdev->dev, "regulator.%d",
+ atomic_inc_return(®ulator_no) - 1);
ret = device_register(&rdev->dev);
- if (ret != 0) {
- kfree(rdev);
- rdev = ERR_PTR(ret);
- goto out;
- }
+ if (ret != 0)
+ goto clean;
dev_set_drvdata(&rdev->dev, rdev);
+ /* set regulator constraints */
+ ret = set_machine_constraints(rdev, &init_data->constraints);
+ if (ret < 0)
+ goto scrub;
+
+ /* add attributes supported by this regulator */
+ ret = add_regulator_attributes(rdev);
+ if (ret < 0)
+ goto scrub;
+
/* set supply regulator if it exists */
if (init_data->supply_regulator_dev) {
ret = set_supply(rdev,
dev_get_drvdata(init_data->supply_regulator_dev));
- if (ret < 0) {
- device_unregister(&rdev->dev);
- kfree(rdev);
- rdev = ERR_PTR(ret);
- goto out;
- }
+ if (ret < 0)
+ goto scrub;
}
/* add consumers devices */
for (--i; i >= 0; i--)
unset_consumer_device_supply(rdev,
init_data->consumer_supplies[i].dev);
- device_unregister(&rdev->dev);
- kfree(rdev);
- rdev = ERR_PTR(ret);
- goto out;
+ goto scrub;
}
}
out:
mutex_unlock(®ulator_list_mutex);
return rdev;
+
+scrub:
+ device_unregister(&rdev->dev);
+clean:
+ kfree(rdev);
+ rdev = ERR_PTR(ret);
+ goto out;
}
EXPORT_SYMBOL_GPL(regulator_register);
/**
* regulator_unregister - unregister regulator
- * @regulator: regulator source
+ * @rdev: regulator to unregister
*
* Called by regulator drivers to unregister a regulator.
*/
EXPORT_SYMBOL_GPL(regulator_unregister);
/**
- * regulator_suspend_prepare: prepare regulators for system wide suspend
+ * regulator_suspend_prepare - prepare regulators for system wide suspend
* @state: system suspend state
*
* Configure each regulator with it's suspend operating parameters for state.
/**
* rdev_get_drvdata - get rdev regulator driver data
- * @regulator: regulator
+ * @rdev: regulator
*
* Get rdev regulator driver private data. This call can be used in the
* regulator driver context.
/**
* regulator_get_id - get regulator ID
- * @regulator: regulator
+ * @rdev: regulator
*/
int rdev_get_id(struct regulator_dev *rdev)
{