[SCSI] Move scsi_print_msg to SPI class

[mv-sheeva.git] / drivers / scsi / Kconfig

diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index afeca325b4dc8a18884b10544ff53f6537123343..4c42065dea88bbc2623264ada6ff5d0329406c61 100644 (file)
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -336,6 +336,7 @@ config SCSI_ACARD
 config SCSI_AHA152X
        tristate "Adaptec AHA152X/2825 support"
        depends on ISA && SCSI && !64BIT
+       select SCSI_SPI_ATTRS
        ---help---
          This is a driver for the AHA-1510, AHA-1520, AHA-1522, and AHA-2825
          SCSI host adapters. It also works for the AVA-1505, but the IRQ etc.
@@ -497,7 +498,7 @@ config SCSI_ATA_PIIX
          If unsure, say N.
 
 config SCSI_SATA_MV
-       tristate "Marvell SATA support"
+       tristate "Marvell SATA support (HIGHLY EXPERIMENTAL)"
        depends on SCSI_SATA && PCI && EXPERIMENTAL
        help
          This option enables support for the Marvell Serial ATA family.
@@ -623,6 +624,7 @@ config SCSI_OMIT_FLASHPOINT
 config SCSI_DMX3191D
        tristate "DMX3191D SCSI support"
        depends on PCI && SCSI
+       select SCSI_SPI_ATTRS
        help
          This is support for Domex DMX3191D SCSI Host Adapters.
 
@@ -632,6 +634,7 @@ config SCSI_DMX3191D
 config SCSI_DTC3280
        tristate "DTC3180/3280 SCSI support"
        depends on ISA && SCSI
+       select SCSI_SPI_ATTRS
        help
          This is support for DTC 3180/3280 SCSI Host Adapters.  Please read
          the SCSI-HOWTO, available from
@@ -752,6 +755,7 @@ config SCSI_GDTH
 config SCSI_GENERIC_NCR5380
        tristate "Generic NCR5380/53c400 SCSI PIO support"
        depends on ISA && SCSI
+       select SCSI_SPI_ATTRS
        ---help---
          This is a driver for the old NCR 53c80 series of SCSI controllers
          on boards using PIO. Most boards such as the Trantor T130 fit this
@@ -771,6 +775,7 @@ config SCSI_GENERIC_NCR5380
 config SCSI_GENERIC_NCR5380_MMIO
        tristate "Generic NCR5380/53c400 SCSI MMIO support"
        depends on ISA && SCSI
+       select SCSI_SPI_ATTRS
        ---help---
          This is a driver for the old NCR 53c80 series of SCSI controllers
          on boards using memory mapped I/O. 
@@ -1254,6 +1259,7 @@ config SCSI_MCA_53C9X
 config SCSI_PAS16
        tristate "PAS16 SCSI support"
        depends on ISA && SCSI
+       select SCSI_SPI_ATTRS
        ---help---
          This is support for a SCSI host adapter.  It is explained in section
          3.10 of the SCSI-HOWTO, available from
@@ -1295,27 +1301,6 @@ config SCSI_QLOGIC_FAS
          To compile this driver as a module, choose M here: the
          module will be called qlogicfas.
 
-config SCSI_QLOGIC_ISP
-       tristate "Qlogic ISP SCSI support (old driver)"
-       depends on PCI && SCSI && BROKEN
-       ---help---
-         This driver works for all QLogic PCI SCSI host adapters (IQ-PCI,
-         IQ-PCI-10, IQ_PCI-D) except for the PCI-basic card.  (This latter
-         card is supported by the "AM53/79C974 PCI SCSI" driver.)
-
-         If you say Y here, make sure to choose "BIOS" at the question "PCI
-         access mode".
-
-         Please read the file <file:Documentation/scsi/qlogicisp.txt>.  You
-         should also read the SCSI-HOWTO, available from
-         <http://www.tldp.org/docs.html#howto>.
-
-         To compile this driver as a module, choose M here: the
-         module will be called qlogicisp.
-
-         These days the hardware is also supported by the more modern qla1280
-         driver.  In doubt use that one instead of qlogicisp.
-
 config SCSI_QLOGIC_FC
        tristate "Qlogic ISP FC SCSI support"
        depends on PCI && SCSI
@@ -1342,14 +1327,6 @@ config SCSI_QLOGIC_1280
          To compile this driver as a module, choose M here: the
          module will be called qla1280.
 
-config SCSI_QLOGIC_1280_1040
-       bool "Qlogic QLA 1020/1040 SCSI support"
-       depends on SCSI_QLOGIC_1280 && SCSI_QLOGIC_ISP!=y
-       help
-         Say Y here if you have a QLogic ISP1020/1040 SCSI host adapter and
-         do not want to use the old driver.  This option enables support in
-         the qla1280 driver for those host adapters.
-
 config SCSI_QLOGICPTI
        tristate "PTI Qlogic, ISP Driver"
        depends on SBUS && SCSI
@@ -1452,6 +1429,7 @@ config SCSI_DC390T
 config SCSI_T128
        tristate "Trantor T128/T128F/T228 SCSI support"
        depends on ISA && SCSI
+       select SCSI_SPI_ATTRS
        ---help---
          This is support for a SCSI host adapter. It is explained in section
          3.11 of the SCSI-HOWTO, available from
@@ -1710,6 +1688,7 @@ config OKTAGON_SCSI
 config ATARI_SCSI
        tristate "Atari native SCSI support"
        depends on ATARI && SCSI && BROKEN
+       select SCSI_SPI_ATTRS
        ---help---
          If you have an Atari with built-in NCR5380 SCSI controller (TT,
          Falcon, ...) say Y to get it supported. Of course also, if you have
@@ -1751,6 +1730,7 @@ config TT_DMA_EMUL
 config MAC_SCSI
        bool "Macintosh NCR5380 SCSI"
        depends on MAC && SCSI=y
+       select SCSI_SPI_ATTRS
        help
          This is the NCR 5380 SCSI controller included on most of the 68030
          based Macintoshes.  If you have one of these say Y and read the
@@ -1772,6 +1752,7 @@ config SCSI_MAC_ESP
 config MVME147_SCSI
        bool "WD33C93 SCSI driver for MVME147"
        depends on MVME147 && SCSI=y
+       select SCSI_SPI_ATTRS
        help
          Support for the on-board SCSI controller on the Motorola MVME147
          single-board computer.
@@ -1779,6 +1760,7 @@ config MVME147_SCSI
 config MVME16x_SCSI
        bool "NCR53C710 SCSI driver for MVME16x"
        depends on MVME16x && SCSI && BROKEN
+       select SCSI_SPI_ATTRS
        help
          The Motorola MVME162, 166, 167, 172 and 177 boards use the NCR53C710
          SCSI controller chip.  Almost everyone using one of these boards
@@ -1787,6 +1769,7 @@ config MVME16x_SCSI
 config BVME6000_SCSI
        bool "NCR53C710 SCSI driver for BVME6000"
        depends on BVME6000 && SCSI && BROKEN
+       select SCSI_SPI_ATTRS
        help
          The BVME4000 and BVME6000 boards from BVM Ltd use the NCR53C710
          SCSI controller chip.  Almost everyone using one of these boards
@@ -1803,6 +1786,7 @@ config SCSI_NCR53C7xx_FAST
 config SUN3_SCSI
        tristate "Sun3 NCR5380 SCSI"
        depends on SUN3 && SCSI && BROKEN
+       select SCSI_SPI_ATTRS
        help
          This option will enable support for the OBIO (onboard io) NCR5380
          SCSI controller found in the Sun 3/50 and 3/60, as well as for