config SCSI
tristate "SCSI device support"
depends on BLOCK
+ select SCSI_DMA if HAS_DMA
---help---
If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
any other SCSI device under Linux, say Y and make sure that you know
However, do not compile this as a module if your root file system
(the one containing the directory /) is located on a SCSI device.
+config SCSI_DMA
+ bool
+ default n
+
config SCSI_TGT
tristate "SCSI target support"
depends on SCSI && EXPERIMENTAL
config SCSI_SAS_ATTRS
tristate "SAS Transport Attributes"
- depends on SCSI
+ depends on SCSI && BLK_DEV_BSG
help
If you wish to export transport-specific information about
each attached SAS device to sysfs, say Y.
endmenu
-menu "SCSI low-level drivers"
+menuconfig SCSI_LOWLEVEL
+ bool "SCSI low-level drivers"
depends on SCSI!=n
+ default y
+
+if SCSI_LOWLEVEL
config ISCSI_TCP
tristate "iSCSI Initiator over TCP/IP"
config SCSI_7000FASST
tristate "7000FASST SCSI support"
depends on ISA && SCSI && ISA_DMA_API
+ select CHECK_SIGNATURE
help
This driver supports the Western Digital 7000 SCSI host adapter
family. Some information is in the source:
tristate "Adaptec AHA152X/2825 support"
depends on ISA && SCSI && !64BIT
select SCSI_SPI_ATTRS
+ select CHECK_SIGNATURE
---help---
This is a driver for the AHA-1510, AHA-1520, AHA-1522, and AHA-2825
SCSI host adapters. It also works for the AVA-1505, but the IRQ etc.
# All the I2O code and drivers do not seem to be 64bit safe.
config SCSI_DPT_I2O
tristate "Adaptec I2O RAID support "
- depends on !64BIT && SCSI && PCI
+ depends on !64BIT && SCSI && PCI && VIRT_TO_BUS
help
This driver supports all of Adaptec's I2O based RAID controllers as
well as the DPT SmartRaid V cards. This is an Adaptec maintained
config SCSI_BUSLOGIC
tristate "BusLogic SCSI support"
- depends on (PCI || ISA || MCA) && SCSI && ISA_DMA_API
+ depends on (PCI || ISA || MCA) && SCSI && ISA_DMA_API && VIRT_TO_BUS
---help---
This is support for BusLogic MultiMaster and FlashPoint SCSI Host
Adapters. Consult the SCSI-HOWTO, available from
tristate "DTC3180/3280 SCSI support"
depends on ISA && SCSI
select SCSI_SPI_ATTRS
+ select CHECK_SIGNATURE
help
This is support for DTC 3180/3280 SCSI Host Adapters. Please read
the SCSI-HOWTO, available from
config SCSI_FUTURE_DOMAIN
tristate "Future Domain 16xx SCSI/AHA-2920A support"
depends on (ISA || PCI) && SCSI
+ select CHECK_SIGNATURE
---help---
This is support for Future Domain's 16-bit SCSI host adapters
(TMC-1660/1680, TMC-1650/1670, TMC-3260, TMC-1610M/MER/MEX) and
config SCSI_IBMMCA
tristate "IBMMCA SCSI support"
- depends on MCA_LEGACY && SCSI
+ depends on MCA && SCSI
---help---
This is support for the IBM SCSI adapter found in many of the PS/2
series computers. These machines have an MCA bus, so you need to
To compile this driver as a module, choose M here: the
module will be called stex.
+config 53C700_BE_BUS
+ bool
+ depends on SCSI_A4000T || SCSI_ZORRO7XX || MVME16x_SCSI || BVME6000_SCSI
+ default y
+
config SCSI_SYM53C8XX_2
tristate "SYM53C8XX Version 2 SCSI support"
depends on PCI && SCSI
config SCSI_SEAGATE
tristate "Seagate ST-02 and Future Domain TMC-8xx SCSI support"
depends on X86 && ISA && SCSI
+ select CHECK_SIGNATURE
---help---
These are 8-bit SCSI controllers; the ST-01 is also supported by
this driver. It is explained in section 3.9 of the SCSI-HOWTO,
tristate "Trantor T128/T128F/T228 SCSI support"
depends on ISA && SCSI
select SCSI_SPI_ATTRS
+ select CHECK_SIGNATURE
---help---
This is support for a SCSI host adapter. It is explained in section
3.11 of the SCSI-HOWTO, available from
built-in SCSI controller, say Y. Otherwise, say N.
To compile this driver as a module, choose M here: the
- module will be called wd33c93.
+ module will be called a3000.
config A2091_SCSI
tristate "A2091/A590 WD33C93A support"
say N.
To compile this driver as a module, choose M here: the
- module will be called wd33c93.
+ module will be called a2091.
config GVP11_SCSI
tristate "GVP Series II WD33C93A support"
If you have the Phase5 Fastlane Z3 SCSI controller, or plan to use
one in the near future, say Y to this question. Otherwise, say N.
-config SCSI_AMIGA7XX
- bool "Amiga NCR53c710 SCSI support (EXPERIMENTAL)"
- depends on AMIGA && SCSI && EXPERIMENTAL && BROKEN
+config SCSI_A4000T
+ tristate "A4000T NCR53c710 SCSI support (EXPERIMENTAL)"
+ depends on AMIGA && SCSI && EXPERIMENTAL
+ select SCSI_SPI_ATTRS
help
- Support for various NCR53c710-based SCSI controllers on the Amiga.
+ If you have an Amiga 4000T and have SCSI devices connected to the
+ built-in SCSI controller, say Y. Otherwise, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called a4000t.
+
+config SCSI_ZORRO7XX
+ tristate "Zorro NCR53c710 SCSI support (EXPERIMENTAL)"
+ depends on ZORRO && SCSI && EXPERIMENTAL
+ select SCSI_SPI_ATTRS
+ help
+ Support for various NCR53c710-based SCSI controllers on Zorro
+ expansion boards for the Amiga.
This includes:
- - the builtin SCSI controller on the Amiga 4000T,
- the Amiga 4091 Zorro III SCSI-2 controller,
- the MacroSystem Development's WarpEngine Amiga SCSI-2 controller
(info at
- the SCSI controller on the Phase5 Blizzard PowerUP 603e+
accelerator card for the Amiga 1200,
- the SCSI controller on the GVP Turbo 040/060 accelerator.
- Note that all of the above SCSI controllers, except for the builtin
- SCSI controller on the Amiga 4000T, reside on the Zorro expansion
- bus, so you also have to enable Zorro bus support if you want to use
- them.
config OKTAGON_SCSI
tristate "BSC Oktagon SCSI support (EXPERIMENTAL)"
single-board computer.
config MVME16x_SCSI
- bool "NCR53C710 SCSI driver for MVME16x"
- depends on MVME16x && SCSI && BROKEN
+ tristate "NCR53C710 SCSI driver for MVME16x"
+ depends on MVME16x && SCSI
select SCSI_SPI_ATTRS
help
The Motorola MVME162, 166, 167, 172 and 177 boards use the NCR53C710
will want to say Y to this question.
config BVME6000_SCSI
- bool "NCR53C710 SCSI driver for BVME6000"
- depends on BVME6000 && SCSI && BROKEN
+ tristate "NCR53C710 SCSI driver for BVME6000"
+ depends on BVME6000 && SCSI
select SCSI_SPI_ATTRS
help
The BVME4000 and BVME6000 boards from BVM Ltd use the NCR53C710
SCSI controller chip. Almost everyone using one of these boards
will want to say Y to this question.
-config SCSI_NCR53C7xx_FAST
- bool "allow FAST-SCSI [10MHz]"
- depends on SCSI_AMIGA7XX || MVME16x_SCSI || BVME6000_SCSI
- help
- This will enable 10MHz FAST-SCSI transfers with your host
- adapter. Some systems have problems with that speed, so it's safest
- to say N here.
-
config SUN3_SCSI
tristate "Sun3 NCR5380 SCSI"
depends on SUN3 && SCSI
To compile this driver as a module, choose M here: the
module will be called esp.
-# bool 'Cyberstorm Mk III SCSI support (EXPERIMENTAL)' CONFIG_CYBERSTORMIII_SCSI
-
config ZFCP
tristate "FCP host bus adapter driver for IBM eServer zSeries"
depends on S390 && QDIO && SCSI
To compile this driver as a module, choose M here: the
module will be called libsrp.
-endmenu
+endif # SCSI_LOWLEVEL
source "drivers/scsi/pcmcia/Kconfig"
projects / mv-sheeva.git / blobdiff