*/
uint32_t aic79xx_periodic_otag;
+/* Some storage boxes are using an LSI chip which has a bug making it
+ * impossible to use aic79xx Rev B chip in 320 speeds. The following
+ * storage boxes have been reported to be buggy:
+ * EonStor 3U 16-Bay: U16U-G3A3
+ * EonStor 2U 12-Bay: U12U-G3A3
+ * SentinelRAID: 2500F R5 / R6
+ * SentinelRAID: 2500F R1
+ * SentinelRAID: 2500F/1500F
+ * SentinelRAID: 150F
+ *
+ * To get around this LSI bug, you can set your board to 160 mode
+ * or you can enable the SLOWCRC bit.
+ */
+uint32_t aic79xx_slowcrc;
+
/*
* Module information and settable options.
*/
" amplitude:<int> Set the signal amplitude (0-7).\n"
" seltime:<int> Selection Timeout:\n"
" (0/256ms,1/128ms,2/64ms,3/32ms)\n"
+" slowcrc Turn on the SLOWCRC bit (Rev B only)\n"
"\n"
" Sample /etc/modprobe.conf line:\n"
" Enable verbose logging\n"
struct scb *);
static void ahd_linux_queue_cmd_complete(struct ahd_softc *ahd,
struct scsi_cmnd *cmd);
-static void ahd_linux_sem_timeout(u_long arg);
-static int ahd_linux_queue_recovery_cmd(struct scsi_cmnd *cmd, scb_flag flag);
+static int ahd_linux_queue_abort_cmd(struct scsi_cmnd *cmd);
static void ahd_linux_initialize_scsi_bus(struct ahd_softc *ahd);
static u_int ahd_linux_user_tagdepth(struct ahd_softc *ahd,
struct ahd_devinfo *devinfo);
struct ahd_softc *ahd;
struct ahd_linux_device *dev = scsi_transport_device_data(cmd->device);
int rtn = SCSI_MLQUEUE_HOST_BUSY;
- unsigned long flags;
ahd = *(struct ahd_softc **)cmd->device->host->hostdata;
- ahd_lock(ahd, &flags);
- if (ahd->platform_data->qfrozen == 0) {
- cmd->scsi_done = scsi_done;
- cmd->result = CAM_REQ_INPROG << 16;
- rtn = ahd_linux_run_command(ahd, dev, cmd);
+ cmd->scsi_done = scsi_done;
+ cmd->result = CAM_REQ_INPROG << 16;
+ rtn = ahd_linux_run_command(ahd, dev, cmd);
- }
- ahd_unlock(ahd, &flags);
return rtn;
}
{
struct ahd_softc *ahd =
*((struct ahd_softc **)dev_to_shost(&starget->dev)->hostdata);
+ struct seeprom_config *sc = ahd->seep_config;
unsigned long flags;
struct scsi_target **ahd_targp = ahd_linux_target_in_softc(starget);
struct ahd_linux_target *targ = scsi_transport_target_data(starget);
*ahd_targp = starget;
memset(targ, 0, sizeof(*targ));
+ if (sc) {
+ int flags = sc->device_flags[starget->id];
+
+ tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id,
+ starget->id, &tstate);
+
+ if ((flags & CFPACKETIZED) == 0) {
+ /* Do not negotiate packetized transfers */
+ spi_rd_strm(starget) = 0;
+ spi_pcomp_en(starget) = 0;
+ spi_rti(starget) = 0;
+ spi_wr_flow(starget) = 0;
+ spi_hold_mcs(starget) = 0;
+ } else {
+ if ((ahd->features & AHD_RTI) == 0)
+ spi_rti(starget) = 0;
+ }
+
+ if ((flags & CFQAS) == 0)
+ spi_qas(starget) = 0;
+
+ /* Transinfo values have been set to BIOS settings */
+ spi_max_width(starget) = (flags & CFWIDEB) ? 1 : 0;
+ spi_min_period(starget) = tinfo->user.period;
+ spi_max_offset(starget) = tinfo->user.offset;
+ }
+
tinfo = ahd_fetch_transinfo(ahd, channel, ahd->our_id,
starget->id, &tstate);
ahd_compile_devinfo(&devinfo, ahd->our_id, starget->id,
CAM_LUN_WILDCARD, channel,
ROLE_INITIATOR);
- spi_min_period(starget) = AHD_SYNCRATE_MAX; /* We can do U320 */
- if ((ahd->bugs & AHD_PACED_NEGTABLE_BUG) != 0)
- spi_max_offset(starget) = MAX_OFFSET_PACED_BUG;
- else
- spi_max_offset(starget) = MAX_OFFSET_PACED;
- spi_max_width(starget) = ahd->features & AHD_WIDE;
-
ahd_set_syncrate(ahd, &devinfo, 0, 0, 0,
AHD_TRANS_GOAL, /*paused*/FALSE);
ahd_set_width(ahd, &devinfo, MSG_EXT_WDTR_BUS_8_BIT,
ahd_linux_abort(struct scsi_cmnd *cmd)
{
int error;
+
+ error = ahd_linux_queue_abort_cmd(cmd);
- error = ahd_linux_queue_recovery_cmd(cmd, SCB_ABORT);
- if (error != 0)
- printf("aic79xx_abort returns 0x%x\n", error);
return error;
}
static int
ahd_linux_dev_reset(struct scsi_cmnd *cmd)
{
- int error;
+ struct ahd_softc *ahd;
+ struct ahd_linux_device *dev;
+ struct scb *reset_scb;
+ u_int cdb_byte;
+ int retval = SUCCESS;
+ int paused;
+ int wait;
+ struct ahd_initiator_tinfo *tinfo;
+ struct ahd_tmode_tstate *tstate;
+ unsigned long flags;
+ DECLARE_COMPLETION(done);
- error = ahd_linux_queue_recovery_cmd(cmd, SCB_DEVICE_RESET);
- if (error != 0)
- printf("aic79xx_dev_reset returns 0x%x\n", error);
- return error;
+ reset_scb = NULL;
+ paused = FALSE;
+ wait = FALSE;
+ ahd = *(struct ahd_softc **)cmd->device->host->hostdata;
+
+ scmd_printk(KERN_INFO, cmd,
+ "Attempting to queue a TARGET RESET message:");
+
+ printf("CDB:");
+ for (cdb_byte = 0; cdb_byte < cmd->cmd_len; cdb_byte++)
+ printf(" 0x%x", cmd->cmnd[cdb_byte]);
+ printf("\n");
+
+ /*
+ * Determine if we currently own this command.
+ */
+ dev = scsi_transport_device_data(cmd->device);
+
+ if (dev == NULL) {
+ /*
+ * No target device for this command exists,
+ * so we must not still own the command.
+ */
+ scmd_printk(KERN_INFO, cmd, "Is not an active device\n");
+ return SUCCESS;
+ }
+
+ /*
+ * Generate us a new SCB
+ */
+ reset_scb = ahd_get_scb(ahd, AHD_NEVER_COL_IDX);
+ if (!reset_scb) {
+ scmd_printk(KERN_INFO, cmd, "No SCB available\n");
+ return FAILED;
+ }
+
+ tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id,
+ cmd->device->id, &tstate);
+ reset_scb->io_ctx = cmd;
+ reset_scb->platform_data->dev = dev;
+ reset_scb->sg_count = 0;
+ ahd_set_residual(reset_scb, 0);
+ ahd_set_sense_residual(reset_scb, 0);
+ reset_scb->platform_data->xfer_len = 0;
+ reset_scb->hscb->control = 0;
+ reset_scb->hscb->scsiid = BUILD_SCSIID(ahd,cmd);
+ reset_scb->hscb->lun = cmd->device->lun;
+ reset_scb->hscb->cdb_len = 0;
+ reset_scb->hscb->task_management = SIU_TASKMGMT_LUN_RESET;
+ reset_scb->flags |= SCB_DEVICE_RESET|SCB_RECOVERY_SCB|SCB_ACTIVE;
+ if ((tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ) != 0) {
+ reset_scb->flags |= SCB_PACKETIZED;
+ } else {
+ reset_scb->hscb->control |= MK_MESSAGE;
+ }
+ dev->openings--;
+ dev->active++;
+ dev->commands_issued++;
+
+ ahd_lock(ahd, &flags);
+
+ LIST_INSERT_HEAD(&ahd->pending_scbs, reset_scb, pending_links);
+ ahd_queue_scb(ahd, reset_scb);
+
+ ahd->platform_data->eh_done = &done;
+ ahd_unlock(ahd, &flags);
+
+ printf("%s: Device reset code sleeping\n", ahd_name(ahd));
+ if (!wait_for_completion_timeout(&done, 5 * HZ)) {
+ ahd_lock(ahd, &flags);
+ ahd->platform_data->eh_done = NULL;
+ ahd_unlock(ahd, &flags);
+ printf("%s: Device reset timer expired (active %d)\n",
+ ahd_name(ahd), dev->active);
+ retval = FAILED;
+ }
+ printf("%s: Device reset returning 0x%x\n", ahd_name(ahd), retval);
+
+ return (retval);
}
/*
ahd_linux_bus_reset(struct scsi_cmnd *cmd)
{
struct ahd_softc *ahd;
- u_long s;
int found;
+ unsigned long flags;
ahd = *(struct ahd_softc **)cmd->device->host->hostdata;
#ifdef AHD_DEBUG
printf("%s: Bus reset called for cmd %p\n",
ahd_name(ahd), cmd);
#endif
- ahd_lock(ahd, &s);
+ ahd_lock(ahd, &flags);
+
found = ahd_reset_channel(ahd, scmd_channel(cmd) + 'A',
/*initiate reset*/TRUE);
- ahd_unlock(ahd, &s);
+ ahd_unlock(ahd, &flags);
if (bootverbose)
printf("%s: SCSI bus reset delivered. "
}
/********************* Platform Dependent Functions ***************************/
-/*
- * Compare "left hand" softc with "right hand" softc, returning:
- * < 0 - lahd has a lower priority than rahd
- * 0 - Softcs are equal
- * > 0 - lahd has a higher priority than rahd
- */
-int
-ahd_softc_comp(struct ahd_softc *lahd, struct ahd_softc *rahd)
-{
- int value;
-
- /*
- * Under Linux, cards are ordered as follows:
- * 1) PCI devices that are marked as the boot controller.
- * 2) PCI devices with BIOS enabled sorted by bus/slot/func.
- * 3) All remaining PCI devices sorted by bus/slot/func.
- */
-#if 0
- value = (lahd->flags & AHD_BOOT_CHANNEL)
- - (rahd->flags & AHD_BOOT_CHANNEL);
- if (value != 0)
- /* Controllers set for boot have a *higher* priority */
- return (value);
-#endif
-
- value = (lahd->flags & AHD_BIOS_ENABLED)
- - (rahd->flags & AHD_BIOS_ENABLED);
- if (value != 0)
- /* Controllers with BIOS enabled have a *higher* priority */
- return (value);
-
- /* Still equal. Sort by bus/slot/func. */
- if (aic79xx_reverse_scan != 0)
- value = ahd_get_pci_bus(lahd->dev_softc)
- - ahd_get_pci_bus(rahd->dev_softc);
- else
- value = ahd_get_pci_bus(rahd->dev_softc)
- - ahd_get_pci_bus(lahd->dev_softc);
- if (value != 0)
- return (value);
- if (aic79xx_reverse_scan != 0)
- value = ahd_get_pci_slot(lahd->dev_softc)
- - ahd_get_pci_slot(rahd->dev_softc);
- else
- value = ahd_get_pci_slot(rahd->dev_softc)
- - ahd_get_pci_slot(lahd->dev_softc);
- if (value != 0)
- return (value);
-
- value = rahd->channel - lahd->channel;
- return (value);
-}
-
static void
ahd_linux_setup_iocell_info(u_long index, int instance, int targ, int32_t value)
{
{ "slewrate", NULL },
{ "precomp", NULL },
{ "amplitude", NULL },
+ { "slowcrc", &aic79xx_slowcrc },
};
end = strchr(s, '\0');
return (ENOMEM);
*((struct ahd_softc **)host->hostdata) = ahd;
- ahd_lock(ahd, &s);
ahd->platform_data->host = host;
host->can_queue = AHD_MAX_QUEUE;
host->cmd_per_lun = 2;
host->max_lun = AHD_NUM_LUNS;
host->max_channel = 0;
host->sg_tablesize = AHD_NSEG;
+ ahd_lock(ahd, &s);
ahd_set_unit(ahd, ahd_linux_unit++);
+ ahd_unlock(ahd, &s);
sprintf(buf, "scsi%d", host->host_no);
new_name = malloc(strlen(buf) + 1, M_DEVBUF, M_NOWAIT);
if (new_name != NULL) {
host->unique_id = ahd->unit;
ahd_linux_initialize_scsi_bus(ahd);
ahd_intr_enable(ahd, TRUE);
- ahd_unlock(ahd, &s);
host->transportt = ahd_linux_transport_template;
{
u_int target_id;
u_int numtarg;
+ unsigned long s;
target_id = 0;
numtarg = 0;
else
numtarg = (ahd->features & AHD_WIDE) ? 16 : 8;
+ ahd_lock(ahd, &s);
+
/*
* Force negotiation to async for all targets that
* will not see an initial bus reset.
ahd_update_neg_request(ahd, &devinfo, tstate,
tinfo, AHD_NEG_ALWAYS);
}
+ ahd_unlock(ahd, &s);
/* Give the bus some time to recover */
if ((ahd->flags & AHD_RESET_BUS_A) != 0) {
ahd_freeze_simq(ahd);
- init_timer(&ahd->platform_data->reset_timer);
- ahd->platform_data->reset_timer.data = (u_long)ahd;
- ahd->platform_data->reset_timer.expires =
- jiffies + (AIC79XX_RESET_DELAY * HZ)/1000;
- ahd->platform_data->reset_timer.function =
- (ahd_linux_callback_t *)ahd_release_simq;
- add_timer(&ahd->platform_data->reset_timer);
+ msleep(AIC79XX_RESET_DELAY);
+ ahd_release_simq(ahd);
}
}
memset(ahd->platform_data, 0, sizeof(struct ahd_platform_data));
ahd->platform_data->irq = AHD_LINUX_NOIRQ;
ahd_lockinit(ahd);
- init_MUTEX_LOCKED(&ahd->platform_data->eh_sem);
ahd->seltime = (aic79xx_seltime & 0x3) << 4;
return (0);
}
switch ((dev->flags & (AHD_DEV_Q_BASIC|AHD_DEV_Q_TAGGED))) {
case AHD_DEV_Q_BASIC:
- scsi_adjust_queue_depth(sdev,
- MSG_SIMPLE_TASK,
- dev->openings + dev->active);
+ scsi_set_tag_type(sdev, MSG_SIMPLE_TASK);
+ scsi_activate_tcq(sdev, dev->openings + dev->active);
break;
case AHD_DEV_Q_TAGGED:
- scsi_adjust_queue_depth(sdev,
- MSG_ORDERED_TASK,
- dev->openings + dev->active);
+ scsi_set_tag_type(sdev, MSG_ORDERED_TASK);
+ scsi_activate_tcq(sdev, dev->openings + dev->active);
break;
default:
/*
* serially on the controller/device. This should
* remove some latency.
*/
- scsi_adjust_queue_depth(sdev,
- /*NON-TAGGED*/0,
- /*queue depth*/2);
+ scsi_deactivate_tcq(sdev, 1);
break;
}
}
struct ahd_tmode_tstate *tstate;
u_int col_idx;
uint16_t mask;
+ unsigned long flags;
+
+ ahd_lock(ahd, &flags);
/*
* Get an scb to use.
}
if ((scb = ahd_get_scb(ahd, col_idx)) == NULL) {
ahd->flags |= AHD_RESOURCE_SHORTAGE;
+ ahd_unlock(ahd, &flags);
return SCSI_MLQUEUE_HOST_BUSY;
}
if ((tstate->auto_negotiate & mask) != 0) {
scb->flags |= SCB_AUTO_NEGOTIATE;
scb->hscb->control |= MK_MESSAGE;
- } else if (cmd->cmnd[0] == INQUIRY
- && (tinfo->curr.offset != 0
- || tinfo->curr.width != MSG_EXT_WDTR_BUS_8_BIT
- || tinfo->curr.ppr_options != 0)
- && (tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ)==0) {
- /*
- * The SCSI spec requires inquiry
- * commands to complete without
- * reporting unit attention conditions.
- * Because of this, an inquiry command
- * that occurs just after a device is
- * reset will result in a data phase
- * with mismatched negotiated rates.
- * The core already forces a renegotiation
- * for reset events that are visible to
- * our controller or that we initiate,
- * but a third party device reset or a
- * hot-plug insertion can still cause this
- * issue. Therefore, we force a re-negotiation
- * for every inquiry command unless we
- * are async.
- */
- scb->flags |= SCB_NEGOTIATE;
- scb->hscb->control |= MK_MESSAGE;
}
if ((dev->flags & (AHD_DEV_Q_TAGGED|AHD_DEV_Q_BASIC)) != 0) {
scb->flags |= SCB_ACTIVE;
ahd_queue_scb(ahd, scb);
+ ahd_unlock(ahd, &flags);
+
return 0;
}
return IRQ_RETVAL(ours);
}
-void
-ahd_platform_flushwork(struct ahd_softc *ahd)
-{
-
-}
-
void
ahd_send_async(struct ahd_softc *ahd, char channel,
u_int target, u_int lun, ac_code code, void *arg)
{
char buf[80];
struct scsi_target *starget;
- struct ahd_linux_target *targ;
struct info_str info;
struct ahd_initiator_tinfo *tinfo;
struct ahd_tmode_tstate *tstate;
starget = ahd->platform_data->starget[target];
if (starget == NULL)
break;
- targ = scsi_transport_target_data(starget);
target_ppr_options =
(spi_dt(starget) ? MSG_EXT_PPR_DT_REQ : 0)
if (ahd_get_transaction_status(scb) == CAM_BDR_SENT
|| ahd_get_transaction_status(scb) == CAM_REQ_ABORTED)
ahd_set_transaction_status(scb, CAM_CMD_TIMEOUT);
- if ((ahd->platform_data->flags & AHD_SCB_UP_EH_SEM) != 0) {
- ahd->platform_data->flags &= ~AHD_SCB_UP_EH_SEM;
- up(&ahd->platform_data->eh_sem);
- }
+
+ if (ahd->platform_data->eh_done)
+ complete(ahd->platform_data->eh_done);
}
ahd_free_scb(ahd, scb);
static void
ahd_linux_queue_cmd_complete(struct ahd_softc *ahd, struct scsi_cmnd *cmd)
{
+ int status;
+ int new_status = DID_OK;
+ int do_fallback = 0;
+ int scsi_status;
+
/*
* Map CAM error codes into Linux Error codes. We
* avoid the conversion so that the DV code has the
* full error information available when making
* state change decisions.
*/
- {
- uint32_t status;
- u_int new_status;
-
- status = ahd_cmd_get_transaction_status(cmd);
- switch (status) {
- case CAM_REQ_INPROG:
- case CAM_REQ_CMP:
- case CAM_SCSI_STATUS_ERROR:
- new_status = DID_OK;
- break;
- case CAM_REQ_ABORTED:
- new_status = DID_ABORT;
- break;
- case CAM_BUSY:
- new_status = DID_BUS_BUSY;
- break;
- case CAM_REQ_INVALID:
- case CAM_PATH_INVALID:
- new_status = DID_BAD_TARGET;
- break;
- case CAM_SEL_TIMEOUT:
- new_status = DID_NO_CONNECT;
- break;
- case CAM_SCSI_BUS_RESET:
- case CAM_BDR_SENT:
- new_status = DID_RESET;
- break;
- case CAM_UNCOR_PARITY:
- new_status = DID_PARITY;
- break;
- case CAM_CMD_TIMEOUT:
- new_status = DID_TIME_OUT;
- break;
- case CAM_UA_ABORT:
- case CAM_REQ_CMP_ERR:
- case CAM_AUTOSENSE_FAIL:
- case CAM_NO_HBA:
- case CAM_DATA_RUN_ERR:
- case CAM_UNEXP_BUSFREE:
- case CAM_SEQUENCE_FAIL:
- case CAM_CCB_LEN_ERR:
- case CAM_PROVIDE_FAIL:
- case CAM_REQ_TERMIO:
- case CAM_UNREC_HBA_ERROR:
- case CAM_REQ_TOO_BIG:
- new_status = DID_ERROR;
- break;
- case CAM_REQUEUE_REQ:
- new_status = DID_REQUEUE;
+
+ status = ahd_cmd_get_transaction_status(cmd);
+ switch (status) {
+ case CAM_REQ_INPROG:
+ case CAM_REQ_CMP:
+ new_status = DID_OK;
+ break;
+ case CAM_AUTOSENSE_FAIL:
+ new_status = DID_ERROR;
+ /* Fallthrough */
+ case CAM_SCSI_STATUS_ERROR:
+ scsi_status = ahd_cmd_get_scsi_status(cmd);
+
+ switch(scsi_status) {
+ case SCSI_STATUS_CMD_TERMINATED:
+ case SCSI_STATUS_CHECK_COND:
+ if ((cmd->result >> 24) != DRIVER_SENSE) {
+ do_fallback = 1;
+ } else {
+ struct scsi_sense_data *sense;
+
+ sense = (struct scsi_sense_data *)
+ &cmd->sense_buffer;
+ if (sense->extra_len >= 5 &&
+ (sense->add_sense_code == 0x47
+ || sense->add_sense_code == 0x48))
+ do_fallback = 1;
+ }
break;
default:
- /* We should never get here */
- new_status = DID_ERROR;
break;
}
-
- ahd_cmd_set_transaction_status(cmd, new_status);
+ break;
+ case CAM_REQ_ABORTED:
+ new_status = DID_ABORT;
+ break;
+ case CAM_BUSY:
+ new_status = DID_BUS_BUSY;
+ break;
+ case CAM_REQ_INVALID:
+ case CAM_PATH_INVALID:
+ new_status = DID_BAD_TARGET;
+ break;
+ case CAM_SEL_TIMEOUT:
+ new_status = DID_NO_CONNECT;
+ break;
+ case CAM_SCSI_BUS_RESET:
+ case CAM_BDR_SENT:
+ new_status = DID_RESET;
+ break;
+ case CAM_UNCOR_PARITY:
+ new_status = DID_PARITY;
+ do_fallback = 1;
+ break;
+ case CAM_CMD_TIMEOUT:
+ new_status = DID_TIME_OUT;
+ do_fallback = 1;
+ break;
+ case CAM_REQ_CMP_ERR:
+ case CAM_UNEXP_BUSFREE:
+ case CAM_DATA_RUN_ERR:
+ new_status = DID_ERROR;
+ do_fallback = 1;
+ break;
+ case CAM_UA_ABORT:
+ case CAM_NO_HBA:
+ case CAM_SEQUENCE_FAIL:
+ case CAM_CCB_LEN_ERR:
+ case CAM_PROVIDE_FAIL:
+ case CAM_REQ_TERMIO:
+ case CAM_UNREC_HBA_ERROR:
+ case CAM_REQ_TOO_BIG:
+ new_status = DID_ERROR;
+ break;
+ case CAM_REQUEUE_REQ:
+ new_status = DID_REQUEUE;
+ break;
+ default:
+ /* We should never get here */
+ new_status = DID_ERROR;
+ break;
}
- cmd->scsi_done(cmd);
-}
-
-static void
-ahd_linux_sem_timeout(u_long arg)
-{
- struct ahd_softc *ahd;
- u_long s;
+ if (do_fallback) {
+ printf("%s: device overrun (status %x) on %d:%d:%d\n",
+ ahd_name(ahd), status, cmd->device->channel,
+ cmd->device->id, cmd->device->lun);
+ }
- ahd = (struct ahd_softc *)arg;
+ ahd_cmd_set_transaction_status(cmd, new_status);
- ahd_lock(ahd, &s);
- if ((ahd->platform_data->flags & AHD_SCB_UP_EH_SEM) != 0) {
- ahd->platform_data->flags &= ~AHD_SCB_UP_EH_SEM;
- up(&ahd->platform_data->eh_sem);
- }
- ahd_unlock(ahd, &s);
+ cmd->scsi_done(cmd);
}
void
ahd_freeze_simq(struct ahd_softc *ahd)
{
- ahd->platform_data->qfrozen++;
- if (ahd->platform_data->qfrozen == 1) {
- scsi_block_requests(ahd->platform_data->host);
- ahd_platform_abort_scbs(ahd, CAM_TARGET_WILDCARD, ALL_CHANNELS,
- CAM_LUN_WILDCARD, SCB_LIST_NULL,
- ROLE_INITIATOR, CAM_REQUEUE_REQ);
- }
+ scsi_block_requests(ahd->platform_data->host);
}
void
ahd_release_simq(struct ahd_softc *ahd)
{
- u_long s;
- int unblock_reqs;
-
- unblock_reqs = 0;
- ahd_lock(ahd, &s);
- if (ahd->platform_data->qfrozen > 0)
- ahd->platform_data->qfrozen--;
- if (ahd->platform_data->qfrozen == 0) {
- unblock_reqs = 1;
- }
- ahd_unlock(ahd, &s);
- /*
- * There is still a race here. The mid-layer
- * should keep its own freeze count and use
- * a bottom half handler to run the queues
- * so we can unblock with our own lock held.
- */
- if (unblock_reqs)
- scsi_unblock_requests(ahd->platform_data->host);
+ scsi_unblock_requests(ahd->platform_data->host);
}
static int
-ahd_linux_queue_recovery_cmd(struct scsi_cmnd *cmd, scb_flag flag)
+ahd_linux_queue_abort_cmd(struct scsi_cmnd *cmd)
{
struct ahd_softc *ahd;
struct ahd_linux_device *dev;
int paused;
int wait;
int disconnected;
- int found;
ahd_mode_state saved_modes;
unsigned long flags;
ahd = *(struct ahd_softc **)cmd->device->host->hostdata;
scmd_printk(KERN_INFO, cmd,
- "Attempting to queue a%s message:",
- flag == SCB_ABORT ? "n ABORT" : " TARGET RESET");
+ "Attempting to queue an ABORT message:");
printf("CDB:");
for (cdb_byte = 0; cdb_byte < cmd->cmd_len; cdb_byte++)
break;
}
- if (pending_scb == NULL && flag == SCB_DEVICE_RESET) {
-
- /* Any SCB for this device will do for a target reset */
- LIST_FOREACH(pending_scb, &ahd->pending_scbs, pending_links) {
- if (ahd_match_scb(ahd, pending_scb,
- scmd_id(cmd),
- scmd_channel(cmd) + 'A',
- CAM_LUN_WILDCARD,
- SCB_LIST_NULL, ROLE_INITIATOR))
- break;
- }
- }
-
if (pending_scb == NULL) {
scmd_printk(KERN_INFO, cmd, "Command not found\n");
goto no_cmd;
ahd_dump_card_state(ahd);
disconnected = TRUE;
- if (flag == SCB_ABORT) {
- if (ahd_search_qinfifo(ahd, cmd->device->id,
- cmd->device->channel + 'A',
- cmd->device->lun,
- pending_scb->hscb->tag,
- ROLE_INITIATOR, CAM_REQ_ABORTED,
- SEARCH_COMPLETE) > 0) {
- printf("%s:%d:%d:%d: Cmd aborted from QINFIFO\n",
- ahd_name(ahd), cmd->device->channel,
- cmd->device->id, cmd->device->lun);
- retval = SUCCESS;
- goto done;
- }
- } else if (ahd_search_qinfifo(ahd, cmd->device->id,
- cmd->device->channel + 'A',
- cmd->device->lun, pending_scb->hscb->tag,
- ROLE_INITIATOR, /*status*/0,
- SEARCH_COUNT) > 0) {
- disconnected = FALSE;
+ if (ahd_search_qinfifo(ahd, cmd->device->id,
+ cmd->device->channel + 'A',
+ cmd->device->lun,
+ pending_scb->hscb->tag,
+ ROLE_INITIATOR, CAM_REQ_ABORTED,
+ SEARCH_COMPLETE) > 0) {
+ printf("%s:%d:%d:%d: Cmd aborted from QINFIFO\n",
+ ahd_name(ahd), cmd->device->channel,
+ cmd->device->id, cmd->device->lun);
+ retval = SUCCESS;
+ goto done;
}
saved_modes = ahd_save_modes(ahd);
last_phase = ahd_inb(ahd, LASTPHASE);
saved_scbptr = ahd_get_scbptr(ahd);
active_scbptr = saved_scbptr;
- if (disconnected && ((last_phase != P_BUSFREE) ||
- (ahd_inb(ahd, SEQ_FLAGS) & NOT_IDENTIFIED) == 0)) {
+ if (disconnected && (ahd_inb(ahd, SEQ_FLAGS) & NOT_IDENTIFIED) == 0) {
struct scb *bus_scb;
bus_scb = ahd_lookup_scb(ahd, active_scbptr);
if (bus_scb == pending_scb)
disconnected = FALSE;
- else if (flag != SCB_ABORT
- && ahd_inb(ahd, SAVED_SCSIID) == pending_scb->hscb->scsiid
- && ahd_inb(ahd, SAVED_LUN) == SCB_GET_LUN(pending_scb))
- disconnected = FALSE;
}
/*
* bus or is in the disconnected state.
*/
saved_scsiid = ahd_inb(ahd, SAVED_SCSIID);
- if (SCB_GET_TAG(pending_scb) == active_scbptr
- || (flag == SCB_DEVICE_RESET
- && SCSIID_TARGET(ahd, saved_scsiid) == scmd_id(cmd))) {
+ if (last_phase != P_BUSFREE
+ && SCB_GET_TAG(pending_scb) == active_scbptr) {
/*
* We're active on the bus, so assert ATN
* and hope that the target responds.
*/
pending_scb = ahd_lookup_scb(ahd, active_scbptr);
- pending_scb->flags |= SCB_RECOVERY_SCB|SCB_DEVICE_RESET;
+ pending_scb->flags |= SCB_RECOVERY_SCB|SCB_ABORT;
ahd_outb(ahd, MSG_OUT, HOST_MSG);
ahd_outb(ahd, SCSISIGO, last_phase|ATNO);
- scmd_printk(KERN_INFO, cmd, "BDR message in message buffer\n");
+ scmd_printk(KERN_INFO, cmd, "Device is active, asserting ATN\n");
wait = TRUE;
- } else if (last_phase != P_BUSFREE
- && ahd_inb(ahd, SCSIPHASE) == 0) {
- /*
- * SCB is not identified, there
- * is no pending REQ, and the sequencer
- * has not seen a busfree. Looks like
- * a stuck connection waiting to
- * go busfree. Reset the bus.
- */
- found = ahd_reset_channel(ahd, cmd->device->channel + 'A',
- /*Initiate Reset*/TRUE);
- printf("%s: Issued Channel %c Bus Reset. "
- "%d SCBs aborted\n", ahd_name(ahd),
- cmd->device->channel + 'A', found);
} else if (disconnected) {
/*
* Actually re-queue this SCB in an attempt
* to select the device before it reconnects.
*/
- pending_scb->flags |= SCB_RECOVERY_SCB|flag;
+ pending_scb->flags |= SCB_RECOVERY_SCB|SCB_ABORT;
ahd_set_scbptr(ahd, SCB_GET_TAG(pending_scb));
pending_scb->hscb->cdb_len = 0;
pending_scb->hscb->task_attribute = 0;
if (paused)
ahd_unpause(ahd);
if (wait) {
- struct timer_list timer;
- int ret;
+ DECLARE_COMPLETION(done);
- ahd->platform_data->flags |= AHD_SCB_UP_EH_SEM;
+ ahd->platform_data->eh_done = &done;
ahd_unlock(ahd, &flags);
- init_timer(&timer);
- timer.data = (u_long)ahd;
- timer.expires = jiffies + (5 * HZ);
- timer.function = ahd_linux_sem_timeout;
- add_timer(&timer);
printf("%s: Recovery code sleeping\n", ahd_name(ahd));
- down(&ahd->platform_data->eh_sem);
- printf("%s: Recovery code awake\n", ahd_name(ahd));
- ret = del_timer_sync(&timer);
- if (ret == 0) {
+ if (!wait_for_completion_timeout(&done, 5 * HZ)) {
+ ahd_lock(ahd, &flags);
+ ahd->platform_data->eh_done = NULL;
+ ahd_unlock(ahd, &flags);
printf("%s: Timer Expired (active %d)\n",
ahd_name(ahd), dev->active);
retval = FAILED;
}
- }
- ahd_unlock(ahd, &flags);
- return (retval);
+ printf("Recovery code awake\n");
+ } else
+ ahd_unlock(ahd, &flags);
+
+ if (retval != SUCCESS)
+ printf("%s: Command abort returning 0x%x\n",
+ ahd_name(ahd), retval);
+
+ return retval;
}
static void ahd_linux_set_width(struct scsi_target *starget, int width)