mpt3sas: Added support for high port count HBA variants.

[karo-tx-linux.git] / drivers / scsi / mpt3sas / mpi / mpi2_init.h

diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_init.h b/drivers/scsi/mpt3sas/mpi/mpi2_init.h
index 068c98efd7428aa687b91f92994200d6a0ff44c8..49166999a664811db1d8e39282486931f53aca3e 100644 (file)
--- a/drivers/scsi/mpt3sas/mpi/mpi2_init.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_init.h
@@ -1,12 +1,12 @@
 /*
- * Copyright (c) 2000-2014 LSI Corporation.
+ * Copyright 2000-2015 Avago Technologies.  All rights reserved.
  *
  *
  *          Name:  mpi2_init.h
  *         Title:  MPI SCSI initiator mode messages and structures
  * Creation Date:  June 23, 2006
  *
- * mpi2_init.h Version:  02.00.15
+ * mpi2_init.h Version:  02.00.17
  *
  * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
  *       prefix are for use only on MPI v2.5 products, and must not be used
@@ -46,6 +46,10 @@
  * 07-10-12  02.00.14  Added MPI2_SCSIIO_CONTROL_SHIFT_DATADIRECTION.
  * 04-09-13  02.00.15  Added SCSIStatusQualifier field to MPI2_SCSI_IO_REPLY,
  *                     replacing the Reserved4 field.
+ * 11-18-14  02.00.16  Updated copyright information.
+ * 03-xx-15  02.00.17  Updated for MPI v2.6.
+ *                     Added MPI2_SEP_REQ_SLOTSTATUS_DEV_OFF and
+ *                     MPI2_SEP_REPLY_SLOTSTATUS_DEV_OFF.
  * --------------------------------------------------------------------------
  */
 
@@ -128,6 +132,7 @@ typedef struct _MPI2_SCSI_IO_REQUEST {
 #define MPI2_SCSIIO_MSGFLAGS_IOCDDR_SENSE_ADDR      (0x04)
 #define MPI2_SCSIIO_MSGFLAGS_IOCPLB_SENSE_ADDR      (0x08)
 #define MPI2_SCSIIO_MSGFLAGS_IOCPLBNTA_SENSE_ADDR   (0x0C)
+#define MPI26_SCSIIO_MSGFLAGS_IOCCTL_SENSE_ADDR     (0x08)
 
 /*SCSI IO SGLFlags bits */
 
@@ -228,7 +233,7 @@ typedef union _MPI25_SCSI_IO_CDB_UNION {
 } MPI25_SCSI_IO_CDB_UNION, *PTR_MPI25_SCSI_IO_CDB_UNION,
        Mpi25ScsiIoCdb_t, *pMpi25ScsiIoCdb_t;
 
-/*MPI v2.5 SCSI IO Request Message */
+/*MPI v2.5/2.6 SCSI IO Request Message */
 typedef struct _MPI25_SCSI_IO_REQUEST {
        U16 DevHandle;          /*0x00 */
        U8 ChainOffset;         /*0x02 */
@@ -302,12 +307,14 @@ typedef struct _MPI25_SCSI_IO_REQUEST {
 #define MPI25_SCSIIO_NUM_SGLOFFSETS                 (4)
 
 /*defines for the IoFlags field */
-#define MPI25_SCSIIO_IOFLAGS_IO_PATH_MASK           (0xC000)
-#define MPI25_SCSIIO_IOFLAGS_NORMAL_PATH            (0x0000)
-#define MPI25_SCSIIO_IOFLAGS_FAST_PATH              (0x4000)
+#define MPI25_SCSIIO_IOFLAGS_IO_PATH_MASK               (0xC000)
+#define MPI25_SCSIIO_IOFLAGS_NORMAL_PATH                (0x0000)
+#define MPI25_SCSIIO_IOFLAGS_FAST_PATH                  (0x4000)
 
+#define MPI26_SCSIIO_IOFLAGS_ESCAPE_PASSTHROUGH         (0x2000)
 #define MPI25_SCSIIO_IOFLAGS_LARGE_CDB                  (0x1000)
 #define MPI25_SCSIIO_IOFLAGS_BIDIRECTIONAL              (0x0800)
+#define MPI26_SCSIIO_IOFLAGS_PORT_REQUEST               (0x0400)
 #define MPI25_SCSIIO_IOFLAGS_CDBLENGTH_MASK             (0x01FF)
 
 /*MPI v2.5 defines for the EEDPFlags bits */
@@ -512,6 +519,7 @@ typedef struct _MPI2_SEP_REQUEST {
 #define MPI2_SEP_REQ_FLAGS_ENCLOSURE_SLOT_ADDRESS       (0x01)
 
 /*SlotStatus defines */
+#define MPI2_SEP_REQ_SLOTSTATUS_DEV_OFF                 (0x00080000)
 #define MPI2_SEP_REQ_SLOTSTATUS_REQUEST_REMOVE          (0x00040000)
 #define MPI2_SEP_REQ_SLOTSTATUS_IDENTIFY_REQUEST        (0x00020000)
 #define MPI2_SEP_REQ_SLOTSTATUS_REBUILD_STOPPED         (0x00000200)
@@ -547,6 +555,7 @@ typedef struct _MPI2_SEP_REPLY {
        Mpi2SepReply_t, *pMpi2SepReply_t;
 
 /*SlotStatus defines */
+#define MPI2_SEP_REPLY_SLOTSTATUS_DEV_OFF               (0x00080000)
 #define MPI2_SEP_REPLY_SLOTSTATUS_REMOVE_READY          (0x00040000)
 #define MPI2_SEP_REPLY_SLOTSTATUS_IDENTIFY_REQUEST      (0x00020000)
 #define MPI2_SEP_REPLY_SLOTSTATUS_REBUILD_STOPPED       (0x00000200)