PM8001_CHIP_DISP->phy_stop_req(pm8001_ha, phy_id);
break;
default:
- rc = -EOPNOTSUPP;
+ rc = -ENOSYS;
}
msleep(300);
return rc;
}
-int pm8001_slave_alloc(struct scsi_device *scsi_dev)
-{
- struct domain_device *dev = sdev_to_domain_dev(scsi_dev);
- if (dev_is_sata(dev)) {
- /* We don't need to rescan targets
- * if REPORT_LUNS request is failed
- */
- if (scsi_dev->lun > 0)
- return -ENXIO;
- scsi_dev->tagged_supported = 1;
- }
- return sas_slave_alloc(scsi_dev);
-}
-
/**
* pm8001_scan_start - we should enable all HBA phys by sending the phy_start
* command to HBA.
{
return PM8001_CHIP_DISP->ssp_io_req(pm8001_ha, ccb);
}
-int pm8001_slave_configure(struct scsi_device *sdev)
-{
- struct domain_device *dev = sdev_to_domain_dev(sdev);
- int ret = sas_slave_configure(sdev);
- if (ret)
- return ret;
- if (dev_is_sata(dev)) {
- #ifdef PM8001_DISABLE_NCQ
- struct ata_port *ap = dev->sata_dev.ap;
- struct ata_device *adev = ap->link.device;
- adev->flags |= ATA_DFLAG_NCQ_OFF;
- scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, 1);
- #endif
- }
- return 0;
-}
+
/* Find the local port id that's attached to this device */
static int sas_find_local_port_id(struct domain_device *dev)
{
do {
dev = t->dev;
pm8001_dev = dev->lldd_dev;
- if (DEV_IS_GONE(pm8001_dev)) {
- if (pm8001_dev) {
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("device %d not ready.\n",
- pm8001_dev->device_id));
- } else {
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("device %016llx not "
- "ready.\n", SAS_ADDR(dev->sas_addr)));
- }
- rc = SAS_PHY_DOWN;
- goto out_done;
- }
port = &pm8001_ha->port[sas_find_local_port_id(dev)];
- if (!port->port_attached) {
+ if (DEV_IS_GONE(pm8001_dev) || !port->port_attached) {
if (sas_protocol_ata(t->task_proto)) {
struct task_status_struct *ts = &t->task_status;
ts->resp = SAS_TASK_UNDELIVERED;
flag = 1; /* directly sata*/
}
} /*register this device to HBA*/
- PM8001_DISC_DBG(pm8001_ha, pm8001_printk("Found device \n"));
+ PM8001_DISC_DBG(pm8001_ha, pm8001_printk("Found device\n"));
PM8001_CHIP_DISP->reg_dev_req(pm8001_ha, pm8001_device, flag);
spin_unlock_irqrestore(&pm8001_ha->lock, flags);
wait_for_completion(&completion);
/* The task is still in Lun, release it then */
case TMF_RESP_FUNC_SUCC:
PM8001_EH_DBG(pm8001_ha,
- pm8001_printk("The task is still in Lun \n"));
+ pm8001_printk("The task is still in Lun\n"));
+ break;
/* The task is not in Lun or failed, reset the phy */
case TMF_RESP_FUNC_FAILED:
case TMF_RESP_FUNC_COMPLETE:
PM8001_EH_DBG(pm8001_ha,
pm8001_printk("The task is not in Lun or failed,"
- " reset the phy \n"));
+ " reset the phy\n"));
break;
}
}