static int sd_init_command(struct scsi_cmnd *SCpnt);
static void sd_uninit_command(struct scsi_cmnd *SCpnt);
static int sd_done(struct scsi_cmnd *);
+static void sd_eh_reset(struct scsi_cmnd *);
static int sd_eh_action(struct scsi_cmnd *, int);
static void sd_read_capacity(struct scsi_disk *sdkp, unsigned char *buffer);
static void scsi_disk_release(struct device *cdev);
.uninit_command = sd_uninit_command,
.done = sd_done,
.eh_action = sd_eh_action,
+ .eh_reset = sd_eh_reset,
};
/*
/**
* sd_setup_discard_cmnd - unmap blocks on thinly provisioned device
- * @sdp: scsi device to operate on
- * @rq: Request to prepare
+ * @cmd: command to prepare
*
- * Will issue either UNMAP or WRITE SAME(16) depending on preference
- * indicated by target device.
+ * Will set up either UNMAP, WRITE SAME(16) or WRITE SAME(10) depending
+ * on the provisioning mode of the target device.
**/
static int sd_setup_discard_cmnd(struct scsi_cmnd *cmd)
{
* sd_setup_write_same_cmnd - write the same data to multiple blocks
* @cmd: command to prepare
*
- * Will issue either WRITE SAME(10) or WRITE SAME(16) depending on
- * preference indicated by target device.
+ * Will set up either WRITE SAME(10) or WRITE SAME(16) depending on
+ * the preference indicated by the target device.
**/
static int sd_setup_write_same_cmnd(struct scsi_cmnd *cmd)
{
/**
* sd_open - open a scsi disk device
- * @inode: only i_rdev member may be used
- * @filp: only f_mode and f_flags may be used
+ * @bdev: Block device of the scsi disk to open
+ * @mode: FMODE_* mask
*
* Returns 0 if successful. Returns a negated errno value in case
* of error.
/**
* sd_release - invoked when the (last) close(2) is called on this
* scsi disk.
- * @inode: only i_rdev member may be used
- * @filp: only f_mode and f_flags may be used
+ * @disk: disk to release
+ * @mode: FMODE_* mask
*
* Returns 0.
*
/**
* sd_ioctl - process an ioctl
- * @inode: only i_rdev/i_bdev members may be used
- * @filp: only f_mode and f_flags may be used
+ * @bdev: target block device
+ * @mode: FMODE_* mask
* @cmd: ioctl command number
* @arg: this is third argument given to ioctl(2) system call.
* Often contains a pointer.
.pr_ops = &sd_pr_ops,
};
+/**
+ * sd_eh_reset - reset error handling callback
+ * @scmd: sd-issued command that has failed
+ *
+ * This function is called by the SCSI midlayer before starting
+ * SCSI EH. When counting medium access failures we have to be
+ * careful to register it only only once per device and SCSI EH run;
+ * there might be several timed out commands which will cause the
+ * 'max_medium_access_timeouts' counter to trigger after the first
+ * SCSI EH run already and set the device to offline.
+ * So this function resets the internal counter before starting SCSI EH.
+ **/
+static void sd_eh_reset(struct scsi_cmnd *scmd)
+{
+ struct scsi_disk *sdkp = scsi_disk(scmd->request->rq_disk);
+
+ /* New SCSI EH run, reset gate variable */
+ sdkp->ignore_medium_access_errors = false;
+}
+
/**
* sd_eh_action - error handling callback
* @scmd: sd-issued command that has failed
* process of recovering or has it suffered an internal failure
* that prevents access to the storage medium.
*/
- sdkp->medium_access_timed_out++;
+ if (!sdkp->ignore_medium_access_errors) {
+ sdkp->medium_access_timed_out++;
+ sdkp->ignore_medium_access_errors = true;
+ }
/*
* If the device keeps failing read/write commands but TEST UNIT
"Medium access timeout failure. Offlining disk!\n");
scsi_device_set_state(scmd->device, SDEV_OFFLINE);
- return FAILED;
+ return SUCCESS;
}
return eh_disp;
static unsigned int sd_completed_bytes(struct scsi_cmnd *scmd)
{
- u64 start_lba = blk_rq_pos(scmd->request);
- u64 end_lba = blk_rq_pos(scmd->request) + (scsi_bufflen(scmd) / 512);
- u64 factor = scmd->device->sector_size / 512;
- u64 bad_lba;
- int info_valid;
+ struct request *req = scmd->request;
+ struct scsi_device *sdev = scmd->device;
+ unsigned int transferred, good_bytes;
+ u64 start_lba, end_lba, bad_lba;
+
/*
- * resid is optional but mostly filled in. When it's unused,
- * its value is zero, so we assume the whole buffer transferred
+ * Some commands have a payload smaller than the device logical
+ * block size (e.g. INQUIRY on a 4K disk).
*/
- unsigned int transferred = scsi_bufflen(scmd) - scsi_get_resid(scmd);
- unsigned int good_bytes;
-
- info_valid = scsi_get_sense_info_fld(scmd->sense_buffer,
- SCSI_SENSE_BUFFERSIZE,
- &bad_lba);
- if (!info_valid)
+ if (scsi_bufflen(scmd) <= sdev->sector_size)
return 0;
- if (scsi_bufflen(scmd) <= scmd->device->sector_size)
+ /* Check if we have a 'bad_lba' information */
+ if (!scsi_get_sense_info_fld(scmd->sense_buffer,
+ SCSI_SENSE_BUFFERSIZE,
+ &bad_lba))
return 0;
- /* be careful ... don't want any overflows */
- do_div(start_lba, factor);
- do_div(end_lba, factor);
-
- /* The bad lba was reported incorrectly, we have no idea where
+ /*
+ * If the bad lba was reported incorrectly, we have no idea where
* the error is.
*/
- if (bad_lba < start_lba || bad_lba >= end_lba)
+ start_lba = sectors_to_logical(sdev, blk_rq_pos(req));
+ end_lba = start_lba + bytes_to_logical(sdev, scsi_bufflen(scmd));
+ if (bad_lba < start_lba || bad_lba >= end_lba)
return 0;
- /* This computation should always be done in terms of
- * the resolution of the device's medium.
+ /*
+ * resid is optional but mostly filled in. When it's unused,
+ * its value is zero, so we assume the whole buffer transferred
+ */
+ transferred = scsi_bufflen(scmd) - scsi_get_resid(scmd);
+
+ /* This computation should always be done in terms of the
+ * resolution of the device's medium.
*/
- good_bytes = (bad_lba - start_lba) * scmd->device->sector_size;
+ good_bytes = logical_to_bytes(sdev, bad_lba - start_lba);
+
return min(good_bytes, transferred);
}
struct request *req = SCpnt->request;
int sense_valid = 0;
int sense_deferred = 0;
- unsigned char op = SCpnt->cmnd[0];
- unsigned char unmap = SCpnt->cmnd[1] & 8;
switch (req_op(req)) {
case REQ_OP_DISCARD:
good_bytes = sd_completed_bytes(SCpnt);
break;
case ILLEGAL_REQUEST:
- if (sshdr.asc == 0x10) /* DIX: Host detected corruption */
+ switch (sshdr.asc) {
+ case 0x10: /* DIX: Host detected corruption */
good_bytes = sd_completed_bytes(SCpnt);
- /* INVALID COMMAND OPCODE or INVALID FIELD IN CDB */
- if (sshdr.asc == 0x20 || sshdr.asc == 0x24) {
- switch (op) {
+ break;
+ case 0x20: /* INVALID COMMAND OPCODE */
+ case 0x24: /* INVALID FIELD IN CDB */
+ switch (SCpnt->cmnd[0]) {
case UNMAP:
sd_config_discard(sdkp, SD_LBP_DISABLE);
break;
case WRITE_SAME_16:
case WRITE_SAME:
- if (unmap)
+ if (SCpnt->cmnd[1] & 8) { /* UNMAP */
sd_config_discard(sdkp, SD_LBP_DISABLE);
- else {
+ } else {
sdkp->device->no_write_same = 1;
sd_config_write_same(sdkp);
-
- good_bytes = 0;
req->__data_len = blk_rq_bytes(req);
req->rq_flags |= RQF_QUIET;
}
+ break;
}
}
break;
/**
* sd_read_block_limits - Query disk device for preferred I/O sizes.
- * @disk: disk to query
+ * @sdkp: disk to query
*/
static void sd_read_block_limits(struct scsi_disk *sdkp)
{
/**
* sd_read_block_characteristics - Query block dev. characteristics
- * @disk: disk to query
+ * @sdkp: disk to query
*/
static void sd_read_block_characteristics(struct scsi_disk *sdkp)
{
/**
* sd_read_block_provisioning - Query provisioning VPD page
- * @disk: disk to query
+ * @sdkp: disk to query
*/
static void sd_read_block_provisioning(struct scsi_disk *sdkp)
{
projects / karo-tx-linux.git / blobdiff