Fix c67x00-ll-hpi compilation failure (bug #10627)

[mv-sheeva.git] / drivers / serial / Kconfig

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index b82595cf13e86ff759c92109fb096f706e68e7e5..36acbcca2d4893c4aa3178e0d7e426cff2029f90 100644 (file)
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -262,12 +262,12 @@ config SERIAL_8250_ACORN
          cards.  If unsure, say N.
 
 config SERIAL_8250_AU1X00
-       bool "AU1X00 serial port support"
+       bool "Au1x00 serial port support"
        depends on SERIAL_8250 != n && SOC_AU1X00
        help
-         If you have an Au1x00 board and want to use the serial port, say Y
-         to this option.  The driver can handle 1 or 2 serial ports.
-         If unsure, say N.
+         If you have an Au1x00 SOC based board and want to use the serial port,
+         say Y to this option. The driver can handle up to 4 serial ports,
+         depending on the SOC. If unsure, say N.
 
 config SERIAL_8250_RM9K
        bool "Support for MIPS RM9xxx integrated serial port"
@@ -686,7 +686,7 @@ config UART0_RTS_PIN
 
 config SERIAL_BFIN_UART1
        bool "Enable UART1"
-       depends on SERIAL_BFIN && (BF534 || BF536 || BF537 || BF54x)
+       depends on SERIAL_BFIN && (!BF531 && !BF532 && !BF533 && !BF561)
        help
          Enable UART1
 
@@ -699,14 +699,14 @@ config BFIN_UART1_CTSRTS
 
 config UART1_CTS_PIN
        int "UART1 CTS pin"
-       depends on BFIN_UART1_CTSRTS && (BF53x || BF561)
+       depends on BFIN_UART1_CTSRTS && !BF54x
        default -1
        help
          Refer to ./include/asm-blackfin/gpio.h to see the GPIO map.
 
 config UART1_RTS_PIN
        int "UART1 RTS pin"
-       depends on BFIN_UART1_CTSRTS && (BF53x || BF561)
+       depends on BFIN_UART1_CTSRTS && !BF54x
        default -1
        help
          Refer to ./include/asm-blackfin/gpio.h to see the GPIO map.
@@ -961,6 +961,9 @@ config SERIAL_CORE
 config SERIAL_CORE_CONSOLE
        bool
 
+config CONSOLE_POLL
+       bool
+
 config SERIAL_68328
        bool "68328 serial support"
        depends on M68328 || M68EZ328 || M68VZ328
@@ -1352,4 +1355,47 @@ config SERIAL_SC26XX_CONSOLE
        help
          Support for Console on SC2681/SC2692 serial ports.
 
+config SERIAL_BFIN_SPORT
+       tristate "Blackfin SPORT emulate UART (EXPERIMENTAL)"
+       depends on BFIN && EXPERIMENTAL
+       select SERIAL_CORE
+       help
+         Enble support SPORT emulate UART on Blackfin series.
+
+         To compile this driver as a module, choose M here: the
+         module will be called bfin_sport_uart.
+
+choice
+       prompt "Baud rate for Blackfin SPORT UART"
+       depends on SERIAL_BFIN_SPORT
+       default SERIAL_SPORT_BAUD_RATE_57600
+       help
+         Choose a baud rate for the SPORT UART, other uart settings are
+         8 bit, 1 stop bit, no parity, no flow control.
+
+config SERIAL_SPORT_BAUD_RATE_115200
+       bool "115200"
+
+config SERIAL_SPORT_BAUD_RATE_57600
+       bool "57600"
+
+config SERIAL_SPORT_BAUD_RATE_38400
+       bool "38400"
+
+config SERIAL_SPORT_BAUD_RATE_19200
+       bool "19200"
+
+config SERIAL_SPORT_BAUD_RATE_9600
+       bool "9600"
+endchoice
+
+config SPORT_BAUD_RATE
+       int
+       depends on SERIAL_BFIN_SPORT
+       default 115200 if (SERIAL_SPORT_BAUD_RATE_115200)
+       default 57600 if (SERIAL_SPORT_BAUD_RATE_57600)
+       default 38400 if (SERIAL_SPORT_BAUD_RATE_38400)
+       default 19200 if (SERIAL_SPORT_BAUD_RATE_19200)
+       default 9600 if (SERIAL_SPORT_BAUD_RATE_9600)
+
 endmenu