#include <linux/tty_flip.h>
#include <linux/platform_device.h>
#include <linux/atmel_pdc.h>
+#include <linux/atmel_serial.h>
#include <asm/io.h>
#include <asm/arch/gpio.h>
#endif
-#include "atmel_serial.h"
-
#if defined(CONFIG_SERIAL_ATMEL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
#define SUPPORT_SYSRQ
#endif
struct uart_port uart; /* uart */
struct clk *clk; /* uart clock */
unsigned short suspended; /* is port suspended? */
+ int break_active; /* break being received */
};
static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART];
*/
static void atmel_stop_tx(struct uart_port *port)
{
- struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
-
UART_PUT_IDR(port, ATMEL_US_TXRDY);
}
*/
static void atmel_start_tx(struct uart_port *port)
{
- struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
-
UART_PUT_IER(port, ATMEL_US_TXRDY);
}
*/
static void atmel_stop_rx(struct uart_port *port)
{
- struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
-
UART_PUT_IDR(port, ATMEL_US_RXRDY);
}
*/
static void atmel_rx_chars(struct uart_port *port)
{
+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
struct tty_struct *tty = port->info->tty;
unsigned int status, ch, flg;
* note that the error handling code is
* out of the main execution path
*/
- if (unlikely(status & (ATMEL_US_PARE | ATMEL_US_FRAME | ATMEL_US_OVRE | ATMEL_US_RXBRK))) {
+ if (unlikely(status & (ATMEL_US_PARE | ATMEL_US_FRAME
+ | ATMEL_US_OVRE | ATMEL_US_RXBRK)
+ || atmel_port->break_active)) {
UART_PUT_CR(port, ATMEL_US_RSTSTA); /* clear error */
- if (status & ATMEL_US_RXBRK) {
+ if (status & ATMEL_US_RXBRK
+ && !atmel_port->break_active) {
status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME); /* ignore side-effect */
port->icount.brk++;
+ atmel_port->break_active = 1;
+ UART_PUT_IER(port, ATMEL_US_RXBRK);
if (uart_handle_break(port))
goto ignore_char;
+ } else {
+ /*
+ * This is either the end-of-break
+ * condition or we've received at
+ * least one character without RXBRK
+ * being set. In both cases, the next
+ * RXBRK will indicate start-of-break.
+ */
+ UART_PUT_IDR(port, ATMEL_US_RXBRK);
+ status &= ~ATMEL_US_RXBRK;
+ atmel_port->break_active = 0;
}
if (status & ATMEL_US_PARE)
port->icount.parity++;
/* Interrupt receive */
if (pending & ATMEL_US_RXRDY)
atmel_rx_chars(port);
+ else if (pending & ATMEL_US_RXBRK) {
+ /*
+ * End of break detected. If it came along
+ * with a character, atmel_rx_chars will
+ * handle it.
+ */
+ UART_PUT_CR(port, ATMEL_US_RSTSTA);
+ UART_PUT_IDR(port, ATMEL_US_RXBRK);
+ atmel_port->break_active = 0;
+ }
// TODO: All reads to CSR will clear these interrupts!
if (pending & ATMEL_US_RIIC) port->icount.rng++;
*/
static int atmel_startup(struct uart_port *port)
{
- struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
int retval;
/*
*/
static void atmel_shutdown(struct uart_port *port)
{
- struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
-
/*
* Disable all interrupts, port and break condition.
*/
unsigned long flags;
unsigned int mode, imr, quot, baud;
+ /* Get current mode register */
+ mode = UART_GET_MR(port) & ~(ATMEL_US_USCLKS | ATMEL_US_CHRL | ATMEL_US_NBSTOP | ATMEL_US_PAR);
+
baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
quot = uart_get_divisor(port, baud);
- /* Get current mode register */
- mode = UART_GET_MR(port) & ~(ATMEL_US_CHRL | ATMEL_US_NBSTOP | ATMEL_US_PAR);
+ if (quot > 65535) { /* BRGR is 16-bit, so switch to slower clock */
+ quot /= 8;
+ mode |= ATMEL_US_USCLKS_MCK_DIV8;
+ }
/* byte size */
switch (termios->c_cflag & CSIZE) {