#include <linux/tty_flip.h>
#include <linux/serial_core.h>
+#ifdef CONFIG_KGDB_UART
+#include <linux/kgdb.h>
+#include <asm/irq_regs.h>
+#endif
+
#include <asm/gpio.h>
#include <asm/mach/bfin_serial_5xx.h>
{
struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
+ while (!(UART_GET_LSR(uart) & TEMT))
+ continue;
+
#ifdef CONFIG_SERIAL_BFIN_DMA
disable_dma(uart->tx_dma_channel);
+#else
+#ifdef CONFIG_BF54x
+ /* Waiting for Transmission Finished */
+ while (!(UART_GET_LSR(uart) & TFI))
+ continue;
+ /* Clear TFI bit */
+ UART_PUT_LSR(uart, TFI);
+ UART_CLEAR_IER(uart, ETBEI);
#else
unsigned short ier;
ier &= ~ETBEI;
UART_PUT_IER(uart, ier);
#endif
+#endif
}
/*
#ifdef CONFIG_SERIAL_BFIN_DMA
bfin_serial_dma_tx_chars(uart);
+#else
+#ifdef CONFIG_BF54x
+ UART_SET_IER(uart, ETBEI);
#else
unsigned short ier;
ier = UART_GET_IER(uart);
ier |= ETBEI;
UART_PUT_IER(uart, ier);
+#endif
bfin_serial_tx_chars(uart);
#endif
}
static void bfin_serial_stop_rx(struct uart_port *port)
{
struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
+#ifdef CONFIG_KGDB_UART
+ if (uart->port.line != CONFIG_KGDB_UART_PORT) {
+#endif
+#ifdef CONFIG_BF54x
+ UART_CLEAR_IER(uart, ERBFI);
+#else
unsigned short ier;
ier = UART_GET_IER(uart);
ier &= ~ERBFI;
UART_PUT_IER(uart, ier);
+#endif
+#ifdef CONFIG_KGDB_UART
+ }
+#endif
}
/*
{
}
+#ifdef CONFIG_KGDB_UART
+static int kgdb_entry_state;
+
+void kgdb_put_debug_char(int chr)
+{
+ struct bfin_serial_port *uart;
+
+ if (CONFIG_KGDB_UART_PORT<0 || CONFIG_KGDB_UART_PORT>=NR_PORTS)
+ uart = &bfin_serial_ports[0];
+ else
+ uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT];
+
+ while (!(UART_GET_LSR(uart) & THRE)) {
+ SSYNC();
+ }
+
+#ifndef CONFIG_BF54x
+ UART_PUT_LCR(uart, UART_GET_LCR(uart)&(~DLAB));
+ SSYNC();
+#endif
+ UART_PUT_CHAR(uart, (unsigned char)chr);
+ SSYNC();
+}
+
+int kgdb_get_debug_char(void)
+{
+ struct bfin_serial_port *uart;
+ unsigned char chr;
+
+ if (CONFIG_KGDB_UART_PORT<0 || CONFIG_KGDB_UART_PORT>=NR_PORTS)
+ uart = &bfin_serial_ports[0];
+ else
+ uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT];
+
+ while(!(UART_GET_LSR(uart) & DR)) {
+ SSYNC();
+ }
+#ifndef CONFIG_BF54x
+ UART_PUT_LCR(uart, UART_GET_LCR(uart)&(~DLAB));
+ SSYNC();
+#endif
+ chr = UART_GET_CHAR(uart);
+ SSYNC();
+
+ return chr;
+}
+#endif
+
#ifdef CONFIG_SERIAL_BFIN_PIO
static void local_put_char(struct bfin_serial_port *uart, char ch)
{
{
struct tty_struct *tty = uart->port.info->tty;
unsigned int status, ch, flg;
-#ifdef BF533_FAMILY
static int in_break = 0;
+#ifdef CONFIG_KGDB_UART
+ struct pt_regs *regs = get_irq_regs();
#endif
status = UART_GET_LSR(uart);
ch = UART_GET_CHAR(uart);
uart->port.icount.rx++;
-#ifdef BF533_FAMILY
- /* The BF533 family of processors have a nice misbehavior where
- * they continuously generate characters for a "single" break.
- * We have to basically ignore this flood until the "next" valid
- * character comes across. All other Blackfin families operate
- * properly though.
- */
- if (in_break) {
- if (ch != 0) {
- in_break = 0;
- ch = UART_GET_CHAR(uart);
- if (bfin_revid() < 5)
- return;
- } else
+#ifdef CONFIG_KGDB_UART
+ if (uart->port.line == CONFIG_KGDB_UART_PORT) {
+ if (uart->port.cons->index == CONFIG_KGDB_UART_PORT && ch == 0x1) { /* Ctrl + A */
+ kgdb_breakkey_pressed(regs);
+ return;
+ } else if (kgdb_entry_state == 0 && ch == '$') {/* connection from KGDB */
+ kgdb_entry_state = 1;
+ } else if (kgdb_entry_state == 1 && ch == 'q') {
+ kgdb_entry_state = 0;
+ kgdb_breakkey_pressed(regs);
+ return;
+ } else if (ch == 0x3) {/* Ctrl + C */
+ kgdb_entry_state = 0;
+ kgdb_breakkey_pressed(regs);
return;
+ } else {
+ kgdb_entry_state = 0;
+ }
}
#endif
+ if (ANOMALY_05000230) {
+ /* The BF533 family of processors have a nice misbehavior where
+ * they continuously generate characters for a "single" break.
+ * We have to basically ignore this flood until the "next" valid
+ * character comes across. All other Blackfin families operate
+ * properly though.
+ * Note: While Anomaly 05000230 does not directly address this,
+ * the changes that went in for it also fixed this issue.
+ */
+ if (in_break) {
+ if (ch != 0) {
+ in_break = 0;
+ ch = UART_GET_CHAR(uart);
+ if (bfin_revid() < 5)
+ return;
+ } else
+ return;
+ }
+ }
+
if (status & BI) {
-#ifdef BF533_FAMILY
- in_break = 1;
-#endif
+ if (ANOMALY_05000230)
+ in_break = 1;
uart->port.icount.brk++;
if (uart_handle_break(&uart->port))
goto ignore_char;
{
struct bfin_serial_port *uart = dev_id;
+#ifdef CONFIG_BF54x
+ unsigned short status;
+ spin_lock(&uart->port.lock);
+ status = UART_GET_LSR(uart);
+ while ((UART_GET_IER(uart) & ERBFI) && (status & DR)) {
+ bfin_serial_rx_chars(uart);
+ status = UART_GET_LSR(uart);
+ }
+ spin_unlock(&uart->port.lock);
+#else
spin_lock(&uart->port.lock);
while ((UART_GET_IIR(uart) & IIR_STATUS) == IIR_RX_READY)
bfin_serial_rx_chars(uart);
spin_unlock(&uart->port.lock);
+#endif
return IRQ_HANDLED;
}
{
struct bfin_serial_port *uart = dev_id;
+#ifdef CONFIG_BF54x
+ unsigned short status;
+ spin_lock(&uart->port.lock);
+ status = UART_GET_LSR(uart);
+ while ((UART_GET_IER(uart) & ETBEI) && (status & THRE)) {
+ bfin_serial_tx_chars(uart);
+ status = UART_GET_LSR(uart);
+ }
+ spin_unlock(&uart->port.lock);
+#else
spin_lock(&uart->port.lock);
while ((UART_GET_IIR(uart) & IIR_STATUS) == IIR_TX_READY)
bfin_serial_tx_chars(uart);
spin_unlock(&uart->port.lock);
+#endif
return IRQ_HANDLED;
}
bfin_serial_mctrl_check(uart);
}
-
#endif
#ifdef CONFIG_SERIAL_BFIN_DMA
set_bfin_dma_config(DIR_READ, DMA_FLOW_STOP,
INTR_ON_BUF,
DIMENSION_LINEAR,
- DATA_SIZE_8));
+ DATA_SIZE_8,
+ DMA_SYNC_RESTART));
set_dma_start_addr(uart->tx_dma_channel, (unsigned long)(xmit->buf+xmit->tail));
set_dma_x_count(uart->tx_dma_channel, uart->tx_count);
set_dma_x_modify(uart->tx_dma_channel, 1);
enable_dma(uart->tx_dma_channel);
+#ifdef CONFIG_BF54x
+ UART_SET_IER(uart, ETBEI);
+#else
ier = UART_GET_IER(uart);
ier |= ETBEI;
UART_PUT_IER(uart, ier);
+#endif
spin_unlock_irqrestore(&uart->port.lock, flags);
}
if (!(get_dma_curr_irqstat(uart->tx_dma_channel)&DMA_RUN)) {
clear_dma_irqstat(uart->tx_dma_channel);
disable_dma(uart->tx_dma_channel);
+#ifdef CONFIG_BF54x
+ UART_CLEAR_IER(uart, ETBEI);
+#else
ier = UART_GET_IER(uart);
ier &= ~ETBEI;
UART_PUT_IER(uart, ier);
+#endif
xmit->tail = (xmit->tail+uart->tx_count) &(UART_XMIT_SIZE -1);
uart->port.icount.tx+=uart->tx_count;
set_dma_config(uart->rx_dma_channel,
set_bfin_dma_config(DIR_WRITE, DMA_FLOW_AUTO,
INTR_ON_ROW, DIMENSION_2D,
- DATA_SIZE_8));
+ DATA_SIZE_8,
+ DMA_SYNC_RESTART));
set_dma_x_count(uart->rx_dma_channel, DMA_RX_XCOUNT);
set_dma_x_modify(uart->rx_dma_channel, 1);
set_dma_y_count(uart->rx_dma_channel, DMA_RX_YCOUNT);
uart->rx_dma_timer.expires = jiffies + DMA_RX_FLUSH_JIFFIES;
add_timer(&(uart->rx_dma_timer));
#else
- if (request_irq
- (uart->port.irq, bfin_serial_rx_int, IRQF_DISABLED,
+ if (request_irq(uart->port.irq, bfin_serial_rx_int, IRQF_DISABLED,
"BFIN_UART_RX", uart)) {
+# ifdef CONFIG_KGDB_UART
+ if (uart->port.line != CONFIG_KGDB_UART_PORT) {
+# endif
printk(KERN_NOTICE "Unable to attach BlackFin UART RX interrupt\n");
return -EBUSY;
+# ifdef CONFIG_KGDB_UART
+ }
+# endif
}
+
if (request_irq
(uart->port.irq+1, bfin_serial_tx_int, IRQF_DISABLED,
"BFIN_UART_TX", uart)) {
return -EBUSY;
}
#endif
+#ifdef CONFIG_BF54x
+ UART_SET_IER(uart, ERBFI);
+#else
UART_PUT_IER(uart, UART_GET_IER(uart) | ERBFI);
+#endif
return 0;
}
free_dma(uart->rx_dma_channel);
del_timer(&(uart->rx_dma_timer));
#else
+#ifdef CONFIG_KGDB_UART
+ if (uart->port.line != CONFIG_KGDB_UART_PORT)
+#endif
free_irq(uart->port.irq, uart);
free_irq(uart->port.irq+1, uart);
#endif
/* Disable UART */
ier = UART_GET_IER(uart);
+#ifdef CONFIG_BF54x
+ UART_CLEAR_IER(uart, 0xF);
+#else
UART_PUT_IER(uart, 0);
+#endif
+#ifndef CONFIG_BF54x
/* Set DLAB in LCR to Access DLL and DLH */
val = UART_GET_LCR(uart);
val |= DLAB;
UART_PUT_LCR(uart, val);
SSYNC();
+#endif
UART_PUT_DLL(uart, quot & 0xFF);
SSYNC();
UART_PUT_DLH(uart, (quot >> 8) & 0xFF);
SSYNC();
+#ifndef CONFIG_BF54x
/* Clear DLAB in LCR to Access THR RBR IER */
val = UART_GET_LCR(uart);
val &= ~DLAB;
UART_PUT_LCR(uart, val);
SSYNC();
+#endif
UART_PUT_LCR(uart, lcr);
/* Enable UART */
+#ifdef CONFIG_BF54x
+ UART_SET_IER(uart, ier);
+#else
UART_PUT_IER(uart, ier);
+#endif
val = UART_GET_GCTL(uart);
val |= UCEN;
bfin_serial_resource[i].uart_rts_pin;
#endif
bfin_serial_hw_init(&bfin_serial_ports[i]);
-
}
-}
-
-#ifdef CONFIG_SERIAL_BFIN_CONSOLE
-static void bfin_serial_console_putchar(struct uart_port *port, int ch)
-{
- struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
- while (!(UART_GET_LSR(uart)))
- barrier();
- UART_PUT_CHAR(uart, ch);
- SSYNC();
-}
-
-/*
- * Interrupts are disabled on entering
- */
-static void
-bfin_serial_console_write(struct console *co, const char *s, unsigned int count)
-{
- struct bfin_serial_port *uart = &bfin_serial_ports[co->index];
- int flags = 0;
-
- spin_lock_irqsave(&uart->port.lock, flags);
- uart_console_write(&uart->port, s, count, bfin_serial_console_putchar);
- spin_unlock_irqrestore(&uart->port.lock, flags);
}
+#ifdef CONFIG_SERIAL_BFIN_CONSOLE
/*
* If the port was already initialised (eg, by a boot loader),
* try to determine the current setup.
case 2: *bits = 7; break;
case 3: *bits = 8; break;
}
+#ifndef CONFIG_BF54x
/* Set DLAB in LCR to Access DLL and DLH */
val = UART_GET_LCR(uart);
val |= DLAB;
UART_PUT_LCR(uart, val);
+#endif
dll = UART_GET_DLL(uart);
dlh = UART_GET_DLH(uart);
+#ifndef CONFIG_BF54x
/* Clear DLAB in LCR to Access THR RBR IER */
val = UART_GET_LCR(uart);
val &= ~DLAB;
UART_PUT_LCR(uart, val);
+#endif
*baud = get_sclk() / (16*(dll | dlh << 8));
}
pr_debug("%s:baud = %d, parity = %c, bits= %d\n", __FUNCTION__, *baud, *parity, *bits);
}
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+static struct uart_driver bfin_serial_reg;
static int __init
bfin_serial_console_setup(struct console *co, char *options)
{
struct bfin_serial_port *uart;
+# ifdef CONFIG_SERIAL_BFIN_CONSOLE
int baud = 57600;
int bits = 8;
int parity = 'n';
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+# ifdef CONFIG_SERIAL_BFIN_CTSRTS
int flow = 'r';
-#else
+# else
int flow = 'n';
-#endif
+# endif
+# endif
/*
* Check whether an invalid uart number has been specified, and
co->index = 0;
uart = &bfin_serial_ports[co->index];
+# ifdef CONFIG_SERIAL_BFIN_CONSOLE
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
else
bfin_serial_console_get_options(uart, &baud, &parity, &bits);
return uart_set_options(&uart->port, co, baud, parity, bits, flow);
+# else
+ return 0;
+# endif
+}
+#endif /* defined (CONFIG_SERIAL_BFIN_CONSOLE) ||
+ defined (CONFIG_EARLY_PRINTK) */
+
+#ifdef CONFIG_SERIAL_BFIN_CONSOLE
+static void bfin_serial_console_putchar(struct uart_port *port, int ch)
+{
+ struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
+ while (!(UART_GET_LSR(uart) & THRE))
+ barrier();
+ UART_PUT_CHAR(uart, ch);
+ SSYNC();
+}
+
+/*
+ * Interrupts are disabled on entering
+ */
+static void
+bfin_serial_console_write(struct console *co, const char *s, unsigned int count)
+{
+ struct bfin_serial_port *uart = &bfin_serial_ports[co->index];
+ int flags = 0;
+
+ spin_lock_irqsave(&uart->port.lock, flags);
+ uart_console_write(&uart->port, s, count, bfin_serial_console_putchar);
+ spin_unlock_irqrestore(&uart->port.lock, flags);
+
}
-static struct uart_driver bfin_serial_reg;
static struct console bfin_serial_console = {
.name = BFIN_SERIAL_NAME,
.write = bfin_serial_console_write,
{
bfin_serial_init_ports();
register_console(&bfin_serial_console);
+#ifdef CONFIG_KGDB_UART
+ kgdb_entry_state = 0;
+ init_kgdb_uart();
+#endif
return 0;
}
console_initcall(bfin_serial_rs_console_init);
#define BFIN_SERIAL_CONSOLE &bfin_serial_console
#else
#define BFIN_SERIAL_CONSOLE NULL
-#endif
+#endif /* CONFIG_SERIAL_BFIN_CONSOLE */
+
+
+#ifdef CONFIG_EARLY_PRINTK
+static __init void early_serial_putc(struct uart_port *port, int ch)
+{
+ unsigned timeout = 0xffff;
+ struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
+
+ while ((!(UART_GET_LSR(uart) & THRE)) && --timeout)
+ cpu_relax();
+ UART_PUT_CHAR(uart, ch);
+}
+
+static __init void early_serial_write(struct console *con, const char *s,
+ unsigned int n)
+{
+ struct bfin_serial_port *uart = &bfin_serial_ports[con->index];
+ unsigned int i;
+
+ for (i = 0; i < n; i++, s++) {
+ if (*s == '\n')
+ early_serial_putc(&uart->port, '\r');
+ early_serial_putc(&uart->port, *s);
+ }
+}
+
+static struct __init console bfin_early_serial_console = {
+ .name = "early_BFuart",
+ .write = early_serial_write,
+ .device = uart_console_device,
+ .flags = CON_PRINTBUFFER,
+ .setup = bfin_serial_console_setup,
+ .index = -1,
+ .data = &bfin_serial_reg,
+};
+
+struct console __init *bfin_earlyserial_init(unsigned int port,
+ unsigned int cflag)
+{
+ struct bfin_serial_port *uart;
+ struct ktermios t;
+
+ if (port == -1 || port >= nr_ports)
+ port = 0;
+ bfin_serial_init_ports();
+ bfin_early_serial_console.index = port;
+ uart = &bfin_serial_ports[port];
+ t.c_cflag = cflag;
+ t.c_iflag = 0;
+ t.c_oflag = 0;
+ t.c_lflag = ICANON;
+ t.c_line = port;
+ bfin_serial_set_termios(&uart->port, &t, &t);
+ return &bfin_early_serial_console;
+}
+
+#endif /* CONFIG_SERIAL_BFIN_CONSOLE */
static struct uart_driver bfin_serial_reg = {
.owner = THIS_MODULE,
static int __init bfin_serial_init(void)
{
int ret;
+#ifdef CONFIG_KGDB_UART
+ struct bfin_serial_port *uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT];
+ struct ktermios t;
+#endif
pr_info("Serial: Blackfin serial driver\n");
uart_unregister_driver(&bfin_serial_reg);
}
}
+#ifdef CONFIG_KGDB_UART
+ if (uart->port.cons->index != CONFIG_KGDB_UART_PORT) {
+ request_irq(uart->port.irq, bfin_serial_rx_int,
+ IRQF_DISABLED, "BFIN_UART_RX", uart);
+ pr_info("Request irq for kgdb uart port\n");
+#ifdef CONFIG_BF54x
+ UART_SET_IER(uart, ERBFI);
+#else
+ UART_PUT_IER(uart, UART_GET_IER(uart) | ERBFI);
+#endif
+ SSYNC();
+ t.c_cflag = CS8|B57600;
+ t.c_iflag = 0;
+ t.c_oflag = 0;
+ t.c_lflag = ICANON;
+ t.c_line = CONFIG_KGDB_UART_PORT;
+ bfin_serial_set_termios(&uart->port, &t, &t);
+ }
+#endif
return ret;
}