Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6

[mv-sheeva.git] / drivers / serial / crisv10.c

diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c
index 901be3483455ba01b8079d2950d199fdacab3eae..7a24e53546c71501c4017cf231a6615ce57ab8c2 100644 (file)
--- a/drivers/serial/crisv10.c
+++ b/drivers/serial/crisv10.c
@@ -415,7 +415,7 @@
  * Fixed DEF_TX value that caused the serial transmitter pin (txd) to go to 0 when
  * closing the last filehandle, NASTY!.
  * Added break generation, not tested though!
- * Use SA_SHIRQ when request_irq() for ser2 and ser3 (shared with) par0 and par1.
+ * Use IRQF_SHARED when request_irq() for ser2 and ser3 (shared with) par0 and par1.
  * You can't use them at the same time (yet..), but you can hopefully switch
  * between ser2/par0, ser3/par1 with the same kernel config.
  * Replaced some magic constants with defines
@@ -2346,7 +2346,7 @@ start_receive(struct e100_serial *info)
 */
 
 static irqreturn_t
-tr_interrupt(int irq, void *dev_id, struct pt_regs * regs)
+tr_interrupt(int irq, void *dev_id)
 {
        struct e100_serial *info;
        unsigned long ireg;
@@ -2395,7 +2395,7 @@ tr_interrupt(int irq, void *dev_id, struct pt_regs * regs)
 /* dma input channel interrupt handler */
 
 static irqreturn_t
-rec_interrupt(int irq, void *dev_id, struct pt_regs * regs)
+rec_interrupt(int irq, void *dev_id)
 {
        struct e100_serial *info;
        unsigned long ireg;
@@ -3054,7 +3054,7 @@ static void handle_ser_tx_interrupt(struct e100_serial *info)
  * ser_int duration: just sending: 8-15 us normally, up to 73 us
  */
 static irqreturn_t
-ser_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+ser_interrupt(int irq, void *dev_id)
 {
        static volatile int tx_started = 0;
        struct e100_serial *info;
@@ -4825,7 +4825,7 @@ show_serial_version(void)
 
 /* rs_init inits the driver at boot (using the module_init chain) */
 
-static struct tty_operations rs_ops = {
+static const struct tty_operations rs_ops = {
        .open = rs_open,
        .close = rs_close,
        .write = rs_write,
@@ -4942,55 +4942,55 @@ rs_init(void)
        /* Not needed in simulator.  May only complicate stuff. */
        /* hook the irq's for DMA channel 6 and 7, serial output and input, and some more... */
 
-       if (request_irq(SERIAL_IRQ_NBR, ser_interrupt, SA_SHIRQ | SA_INTERRUPT, "serial ", NULL))
+       if (request_irq(SERIAL_IRQ_NBR, ser_interrupt, IRQF_SHARED | IRQF_DISABLED, "serial ", NULL))
                panic("irq8");
 
 #ifdef CONFIG_ETRAX_SERIAL_PORT0
 #ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT
-       if (request_irq(SER0_DMA_TX_IRQ_NBR, tr_interrupt, SA_INTERRUPT, "serial 0 dma tr", NULL))
+       if (request_irq(SER0_DMA_TX_IRQ_NBR, tr_interrupt, IRQF_DISABLED, "serial 0 dma tr", NULL))
                panic("irq22");
 #endif
 #ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN
-       if (request_irq(SER0_DMA_RX_IRQ_NBR, rec_interrupt, SA_INTERRUPT, "serial 0 dma rec", NULL))
+       if (request_irq(SER0_DMA_RX_IRQ_NBR, rec_interrupt, IRQF_DISABLED, "serial 0 dma rec", NULL))
                panic("irq23");
 #endif
 #endif
 
 #ifdef CONFIG_ETRAX_SERIAL_PORT1
 #ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA8_OUT
-       if (request_irq(SER1_DMA_TX_IRQ_NBR, tr_interrupt, SA_INTERRUPT, "serial 1 dma tr", NULL))
+       if (request_irq(SER1_DMA_TX_IRQ_NBR, tr_interrupt, IRQF_DISABLED, "serial 1 dma tr", NULL))
                panic("irq24");
 #endif
 #ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA9_IN
-       if (request_irq(SER1_DMA_RX_IRQ_NBR, rec_interrupt, SA_INTERRUPT, "serial 1 dma rec", NULL))
+       if (request_irq(SER1_DMA_RX_IRQ_NBR, rec_interrupt, IRQF_DISABLED, "serial 1 dma rec", NULL))
                panic("irq25");
 #endif
 #endif
 #ifdef CONFIG_ETRAX_SERIAL_PORT2
        /* DMA Shared with par0 (and SCSI0 and ATA) */
 #ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT
-       if (request_irq(SER2_DMA_TX_IRQ_NBR, tr_interrupt, SA_SHIRQ | SA_INTERRUPT, "serial 2 dma tr", NULL))
+       if (request_irq(SER2_DMA_TX_IRQ_NBR, tr_interrupt, IRQF_SHARED | IRQF_DISABLED, "serial 2 dma tr", NULL))
                panic("irq18");
 #endif
 #ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN
-       if (request_irq(SER2_DMA_RX_IRQ_NBR, rec_interrupt, SA_SHIRQ | SA_INTERRUPT, "serial 2 dma rec", NULL))
+       if (request_irq(SER2_DMA_RX_IRQ_NBR, rec_interrupt, IRQF_SHARED | IRQF_DISABLED, "serial 2 dma rec", NULL))
                panic("irq19");
 #endif
 #endif
 #ifdef CONFIG_ETRAX_SERIAL_PORT3
        /* DMA Shared with par1 (and SCSI1 and Extern DMA 0) */
 #ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA4_OUT
-       if (request_irq(SER3_DMA_TX_IRQ_NBR, tr_interrupt, SA_SHIRQ | SA_INTERRUPT, "serial 3 dma tr", NULL))
+       if (request_irq(SER3_DMA_TX_IRQ_NBR, tr_interrupt, IRQF_SHARED | IRQF_DISABLED, "serial 3 dma tr", NULL))
                panic("irq20");
 #endif
 #ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA5_IN
-       if (request_irq(SER3_DMA_RX_IRQ_NBR, rec_interrupt, SA_SHIRQ | SA_INTERRUPT, "serial 3 dma rec", NULL))
+       if (request_irq(SER3_DMA_RX_IRQ_NBR, rec_interrupt, IRQF_SHARED | IRQF_DISABLED, "serial 3 dma rec", NULL))
                panic("irq21");
 #endif
 #endif
 
 #ifdef CONFIG_ETRAX_SERIAL_FLUSH_DMA_FAST
-       if (request_irq(TIMER1_IRQ_NBR, timeout_interrupt, SA_SHIRQ | SA_INTERRUPT,
+       if (request_irq(TIMER1_IRQ_NBR, timeout_interrupt, IRQF_SHARED | IRQF_DISABLED,
                       "fast serial dma timeout", NULL)) {
                printk(KERN_CRIT "err: timer1 irq\n");
        }