spi: SuperH MSIOF SPI Master driver V2

[mv-sheeva.git] / drivers / spi / Kconfig

diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 2c733c27db2f4dd95d938528d52104ab4c9d0a85..06e1c0c9d35e838c13857b8ae96301daa622e6d0 100644 (file)
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -117,10 +117,11 @@ config SPI_GPIO
          speed with a custom version of this driver; see the source code.
 
 config SPI_IMX
-       tristate "Freescale iMX SPI controller"
-       depends on ARCH_MX1 && EXPERIMENTAL
+       tristate "Freescale i.MX SPI controllers"
+       depends on ARCH_MXC
+       select SPI_BITBANG
        help
-         This enables using the Freescale iMX SPI controller in master
+         This enables using the Freescale i.MX SPI controllers in master
          mode.
 
 config SPI_LM70_LLP
@@ -132,6 +133,14 @@ config SPI_LM70_LLP
          which interfaces to an LM70 temperature sensor using
          a parallel port.
 
+config SPI_MPC52xx
+       tristate "Freescale MPC52xx SPI (non-PSC) controller support"
+       depends on PPC_MPC52xx && SPI
+       select SPI_MASTER_OF
+       help
+         This drivers supports the MPC52xx SPI controller in master SPI
+         mode.
+
 config SPI_MPC52xx_PSC
        tristate "Freescale MPC52xx PSC SPI controller"
        depends on PPC_MPC52xx && EXPERIMENTAL
@@ -173,11 +182,21 @@ config SPI_PL022
        tristate "ARM AMBA PL022 SSP controller (EXPERIMENTAL)"
        depends on ARM_AMBA && EXPERIMENTAL
        default y if MACH_U300
+       default y if ARCH_REALVIEW
+       default y if INTEGRATOR_IMPD1
+       default y if ARCH_VERSATILE
        help
          This selects the ARM(R) AMBA(R) PrimeCell PL022 SSP
          controller. If you have an embedded system with an AMBA(R)
          bus and a PL022 controller, say Y or M here.
 
+config SPI_PPC4xx
+       tristate "PPC4xx SPI Controller"
+       depends on PPC32 && 4xx && SPI_MASTER
+       select SPI_BITBANG
+       help
+         This selects a driver for the PPC4xx SPI Controller.
+
 config SPI_PXA2XX
        tristate "PXA2xx SSP SPI master"
        depends on ARCH_PXA && EXPERIMENTAL
@@ -204,6 +223,13 @@ config SPI_S3C24XX_GPIO
          the inbuilt hardware cannot provide the transfer mode, or
          where the board is using non hardware connected pins.
 
+config SPI_SH_MSIOF
+       tristate "SuperH MSIOF SPI controller"
+       depends on SUPERH && HAVE_CLK
+       select SPI_BITBANG
+       help
+         SPI driver for SuperH MSIOF blocks.
+
 config SPI_SH_SCI
        tristate "SuperH SCI SPI controller"
        depends on SUPERH
@@ -211,6 +237,12 @@ config SPI_SH_SCI
        help
          SPI driver for SuperH SCI blocks.
 
+config SPI_STMP3XXX
+       tristate "Freescale STMP37xx/378x SPI/SSP controller"
+       depends on ARCH_STMP3XXX && SPI_MASTER
+       help
+         SPI driver for Freescale STMP37xx/378x SoC SSP interface
+
 config SPI_TXX9
        tristate "Toshiba TXx9 SPI controller"
        depends on GENERIC_GPIO && CPU_TX49XX
@@ -218,15 +250,31 @@ config SPI_TXX9
          SPI driver for Toshiba TXx9 MIPS SoCs
 
 config SPI_XILINX
-       tristate "Xilinx SPI controller"
-       depends on (XILINX_VIRTEX || MICROBLAZE) && EXPERIMENTAL
+       tristate "Xilinx SPI controller common module"
+       depends on HAS_IOMEM && EXPERIMENTAL
        select SPI_BITBANG
+       select SPI_XILINX_OF if (XILINX_VIRTEX || MICROBLAZE)
        help
          This exposes the SPI controller IP from the Xilinx EDK.
 
          See the "OPB Serial Peripheral Interface (SPI) (v1.00e)"
          Product Specification document (DS464) for hardware details.
 
+         Or for the DS570, see "XPS Serial Peripheral Interface (SPI) (v2.00b)"
+
+config SPI_XILINX_OF
+       tristate "Xilinx SPI controller OF device"
+       depends on SPI_XILINX && (XILINX_VIRTEX || MICROBLAZE)
+       help
+         This is the OF driver for the SPI controller IP from the Xilinx EDK.
+
+config SPI_XILINX_PLTFM
+       tristate "Xilinx SPI controller platform device"
+       depends on SPI_XILINX
+       help
+         This is the platform driver for the SPI controller IP
+         from the Xilinx EDK.
+
 #
 # Add new SPI master controllers in alphabetical order above this line
 #