#define SPMODE_ENABLE (1 << 24)
#define SPMODE_LEN(x) ((x) << 20)
#define SPMODE_PM(x) ((x) << 16)
+#define SPMODE_OP (1 << 14)
/*
* Default for SPI Mode:
unsigned nsecs; /* (clock cycle time)/2 */
u32 sysclk;
+ u32 rx_shift; /* RX data reg shift when in qe mode */
+ u32 tx_shift; /* TX data reg shift when in qe mode */
+
+ bool qe_mode;
+
void (*activate_cs) (u8 cs, u8 polarity);
void (*deactivate_cs) (u8 cs, u8 polarity);
};
void mpc83xx_spi_rx_buf_##type(u32 data, struct mpc83xx_spi *mpc83xx_spi) \
{ \
type * rx = mpc83xx_spi->rx; \
- *rx++ = (type)data; \
+ *rx++ = (type)(data >> mpc83xx_spi->rx_shift); \
mpc83xx_spi->rx = rx; \
}
{ \
u32 data; \
const type * tx = mpc83xx_spi->tx; \
- data = *tx++; \
+ if (!tx) \
+ return 0; \
+ data = *tx++ << mpc83xx_spi->tx_shift; \
mpc83xx_spi->tx = tx; \
return data; \
}
len = len - 1;
/* mask out bits we are going to set */
- regval &= ~0x38ff0000;
+ regval &= ~(SPMODE_CP_BEGIN_EDGECLK | SPMODE_CI_INACTIVEHIGH |
+ SPMODE_LEN(0xF) | SPMODE_DIV16 | SPMODE_PM(0xF));
if (spi->mode & SPI_CPHA)
regval |= SPMODE_CP_BEGIN_EDGECLK;
if ((mpc83xx_spi->sysclk / spi->max_speed_hz) >= 64) {
u8 pm = mpc83xx_spi->sysclk / (spi->max_speed_hz * 64);
+ if (pm > 0x0f) {
+ printk(KERN_WARNING "MPC83xx SPI: SPICLK can't be less then a SYSCLK/1024!\n"
+ "Requested SPICLK is %d Hz. Will use %d Hz instead.\n",
+ spi->max_speed_hz, mpc83xx_spi->sysclk / 1024);
+ pm = 0x0f;
+ }
regval |= SPMODE_PM(pm) | SPMODE_DIV16;
} else {
u8 pm = mpc83xx_spi->sysclk / (spi->max_speed_hz * 4);
regval |= SPMODE_PM(pm);
}
+ /* Turn off SPI unit prior changing mode */
+ mpc83xx_spi_write_reg(&mpc83xx_spi->base->mode, 0);
mpc83xx_spi_write_reg(&mpc83xx_spi->base->mode, regval);
if (mpc83xx_spi->activate_cs)
mpc83xx_spi->activate_cs(spi->chip_select, pol);
|| ((bits_per_word > 16) && (bits_per_word != 32)))
return -EINVAL;
+ mpc83xx_spi->rx_shift = 0;
+ mpc83xx_spi->tx_shift = 0;
if (bits_per_word <= 8) {
mpc83xx_spi->get_rx = mpc83xx_spi_rx_buf_u8;
mpc83xx_spi->get_tx = mpc83xx_spi_tx_buf_u8;
+ if (mpc83xx_spi->qe_mode) {
+ mpc83xx_spi->rx_shift = 16;
+ mpc83xx_spi->tx_shift = 24;
+ }
} else if (bits_per_word <= 16) {
mpc83xx_spi->get_rx = mpc83xx_spi_rx_buf_u16;
mpc83xx_spi->get_tx = mpc83xx_spi_tx_buf_u16;
+ if (mpc83xx_spi->qe_mode) {
+ mpc83xx_spi->rx_shift = 16;
+ mpc83xx_spi->tx_shift = 16;
+ }
} else if (bits_per_word <= 32) {
mpc83xx_spi->get_rx = mpc83xx_spi_rx_buf_u32;
mpc83xx_spi->get_tx = mpc83xx_spi_tx_buf_u32;
regval = mpc83xx_spi_read_reg(&mpc83xx_spi->base->mode);
/* Mask out bits_per_wordgth */
- regval &= 0xff0fffff;
+ regval &= ~SPMODE_LEN(0xF);
regval |= SPMODE_LEN(bits_per_word);
+ /* Turn off SPI unit prior changing mode */
+ mpc83xx_spi_write_reg(&mpc83xx_spi->base->mode, 0);
mpc83xx_spi_write_reg(&mpc83xx_spi->base->mode, regval);
return 0;
}
+/* the spi->mode bits understood by this driver: */
+#define MODEBITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH)
+
static int mpc83xx_spi_setup(struct spi_device *spi)
{
struct spi_bitbang *bitbang;
struct mpc83xx_spi *mpc83xx_spi;
int retval;
+ if (spi->mode & ~MODEBITS) {
+ dev_dbg(&spi->dev, "setup: unsupported mode bits %x\n",
+ spi->mode & ~MODEBITS);
+ return -EINVAL;
+ }
+
if (!spi->max_speed_hz)
return -EINVAL;
return t->len - mpc83xx_spi->count;
}
-irqreturn_t mpc83xx_spi_irq(s32 irq, void *context_data,
- struct pt_regs * ptregs)
+irqreturn_t mpc83xx_spi_irq(s32 irq, void *context_data)
{
struct mpc83xx_spi *mpc83xx_spi = context_data;
u32 event;
ret = -ENODEV;
goto free_master;
}
-
mpc83xx_spi = spi_master_get_devdata(master);
mpc83xx_spi->bitbang.master = spi_master_get(master);
mpc83xx_spi->bitbang.chipselect = mpc83xx_spi_chipselect;
mpc83xx_spi->sysclk = pdata->sysclk;
mpc83xx_spi->activate_cs = pdata->activate_cs;
mpc83xx_spi->deactivate_cs = pdata->deactivate_cs;
+ mpc83xx_spi->qe_mode = pdata->qe_mode;
mpc83xx_spi->get_rx = mpc83xx_spi_rx_buf_u8;
mpc83xx_spi->get_tx = mpc83xx_spi_tx_buf_u8;
+ mpc83xx_spi->rx_shift = 0;
+ mpc83xx_spi->tx_shift = 0;
+ if (mpc83xx_spi->qe_mode) {
+ mpc83xx_spi->rx_shift = 16;
+ mpc83xx_spi->tx_shift = 24;
+ }
+
mpc83xx_spi->bitbang.master->setup = mpc83xx_spi_setup;
init_completion(&mpc83xx_spi->done);
/* Enable SPI interface */
regval = pdata->initial_spmode | SPMODE_INIT_VAL | SPMODE_ENABLE;
+ if (pdata->qe_mode)
+ regval |= SPMODE_OP;
+
mpc83xx_spi_write_reg(&mpc83xx_spi->base->mode, regval);
ret = spi_bitbang_start(&mpc83xx_spi->bitbang);