#define BOARD_GPIO_12 0x1000 /* gpio 12 */
#define BOARD_GPIO_13 0x2000 /* gpio 13 */
+/* **** Core type/rev defaults **** */
+#define D11CONF 0x0fffffb0 /* Supported D11 revs: 4, 5, 7-27
+ * also need to update wlc.h MAXCOREREV
+ */
+
+#define NCONF 0x000001ff /* Supported nphy revs:
+ * 0 4321a0
+ * 1 4321a1
+ * 2 4321b0/b1/c0/c1
+ * 3 4322a0
+ * 4 4322a1
+ * 5 4716a0
+ * 6 43222a0, 43224a0
+ * 7 43226a0
+ * 8 5357a0, 43236a0
+ */
+
+#define LCNCONF 0x00000007 /* Supported lcnphy revs:
+ * 0 4313a0, 4336a0, 4330a0
+ * 1
+ * 2 4330a0
+ */
+
+#define SSLPNCONF 0x0000000f /* Supported sslpnphy revs:
+ * 0 4329a0/k0
+ * 1 4329b0/4329C0
+ * 2 4319a0
+ * 3 5356a0
+ */
+
+/********************************************************************
+ * Phy/Core Configuration. Defines macros to to check core phy/rev *
+ * compile-time configuration. Defines default core support. *
+ * ******************************************************************
+ */
+
+/* Basic macros to check a configuration bitmask */
+
+#define CONF_HAS(config, val) ((config) & (1 << (val)))
+#define CONF_MSK(config, mask) ((config) & (mask))
+#define MSK_RANGE(low, hi) ((1 << ((hi)+1)) - (1 << (low)))
+#define CONF_RANGE(config, low, hi) (CONF_MSK(config, MSK_RANGE(low, high)))
+
+#define CONF_IS(config, val) ((config) == (1 << (val)))
+#define CONF_GE(config, val) ((config) & (0-(1 << (val))))
+#define CONF_GT(config, val) ((config) & (0-2*(1 << (val))))
+#define CONF_LT(config, val) ((config) & ((1 << (val))-1))
+#define CONF_LE(config, val) ((config) & (2*(1 << (val))-1))
+
+/* Wrappers for some of the above, specific to config constants */
+
+#define NCONF_HAS(val) CONF_HAS(NCONF, val)
+#define NCONF_MSK(mask) CONF_MSK(NCONF, mask)
+#define NCONF_IS(val) CONF_IS(NCONF, val)
+#define NCONF_GE(val) CONF_GE(NCONF, val)
+#define NCONF_GT(val) CONF_GT(NCONF, val)
+#define NCONF_LT(val) CONF_LT(NCONF, val)
+#define NCONF_LE(val) CONF_LE(NCONF, val)
+
+#define LCNCONF_HAS(val) CONF_HAS(LCNCONF, val)
+#define LCNCONF_MSK(mask) CONF_MSK(LCNCONF, mask)
+#define LCNCONF_IS(val) CONF_IS(LCNCONF, val)
+#define LCNCONF_GE(val) CONF_GE(LCNCONF, val)
+#define LCNCONF_GT(val) CONF_GT(LCNCONF, val)
+#define LCNCONF_LT(val) CONF_LT(LCNCONF, val)
+#define LCNCONF_LE(val) CONF_LE(LCNCONF, val)
+
+#define D11CONF_HAS(val) CONF_HAS(D11CONF, val)
+#define D11CONF_MSK(mask) CONF_MSK(D11CONF, mask)
+#define D11CONF_IS(val) CONF_IS(D11CONF, val)
+#define D11CONF_GE(val) CONF_GE(D11CONF, val)
+#define D11CONF_GT(val) CONF_GT(D11CONF, val)
+#define D11CONF_LT(val) CONF_LT(D11CONF, val)
+#define D11CONF_LE(val) CONF_LE(D11CONF, val)
+
+#define PHYCONF_HAS(val) CONF_HAS(PHYTYPE, val)
+#define PHYCONF_IS(val) CONF_IS(PHYTYPE, val)
+
+#define NREV_IS(var, val) (NCONF_HAS(val) && (NCONF_IS(val) || ((var) == (val))))
+#define NREV_GE(var, val) (NCONF_GE(val) && (!NCONF_LT(val) || ((var) >= (val))))
+#define NREV_GT(var, val) (NCONF_GT(val) && (!NCONF_LE(val) || ((var) > (val))))
+#define NREV_LT(var, val) (NCONF_LT(val) && (!NCONF_GE(val) || ((var) < (val))))
+#define NREV_LE(var, val) (NCONF_LE(val) && (!NCONF_GT(val) || ((var) <= (val))))
+
+#define LCNREV_IS(var, val) (LCNCONF_HAS(val) && (LCNCONF_IS(val) || ((var) == (val))))
+#define LCNREV_GE(var, val) (LCNCONF_GE(val) && (!LCNCONF_LT(val) || ((var) >= (val))))
+#define LCNREV_GT(var, val) (LCNCONF_GT(val) && (!LCNCONF_LE(val) || ((var) > (val))))
+#define LCNREV_LT(var, val) (LCNCONF_LT(val) && (!LCNCONF_GE(val) || ((var) < (val))))
+#define LCNREV_LE(var, val) (LCNCONF_LE(val) && (!LCNCONF_GT(val) || ((var) <= (val))))
+
+#define D11REV_IS(var, val) (D11CONF_HAS(val) && (D11CONF_IS(val) || ((var) == (val))))
+#define D11REV_GE(var, val) (D11CONF_GE(val) && (!D11CONF_LT(val) || ((var) >= (val))))
+#define D11REV_GT(var, val) (D11CONF_GT(val) && (!D11CONF_LE(val) || ((var) > (val))))
+#define D11REV_LT(var, val) (D11CONF_LT(val) && (!D11CONF_GE(val) || ((var) < (val))))
+#define D11REV_LE(var, val) (D11CONF_LE(val) && (!D11CONF_GT(val) || ((var) <= (val))))
+
+#define PHYTYPE_IS(var, val) (PHYCONF_HAS(val) && (PHYCONF_IS(val) || ((var) == (val))))
+
+/* Finally, early-exit from switch case if anyone wants it... */
+
+#define CASECHECK(config, val) if (!(CONF_HAS(config, val))) break
+#define CASEMSK(config, mask) if (!(CONF_MSK(config, mask))) break
+
+/* Set up PHYTYPE automatically: (depends on PHY_TYPE_X, from d11.h) */
+
+#define _PHYCONF_N (1 << PHY_TYPE_N)
+#define _PHYCONF_LCN (1 << PHY_TYPE_LCN)
+#define _PHYCONF_SSLPN (1 << PHY_TYPE_SSN)
+
+#define PHYTYPE (_PHYCONF_N | _PHYCONF_LCN | _PHYCONF_SSLPN)
+
+/* Utility macro to identify 802.11n (HT) capable PHYs */
+#define PHYTYPE_11N_CAP(phytype) \
+ (PHYTYPE_IS(phytype, PHY_TYPE_N) || \
+ PHYTYPE_IS(phytype, PHY_TYPE_LCN) || \
+ PHYTYPE_IS(phytype, PHY_TYPE_SSN))
+
+/* Last but not least: shorter wlc-specific var checks */
+#define WLCISNPHY(band) PHYTYPE_IS((band)->phytype, PHY_TYPE_N)
+#define WLCISLCNPHY(band) PHYTYPE_IS((band)->phytype, PHY_TYPE_LCN)
+#define WLCISSSLPNPHY(band) PHYTYPE_IS((band)->phytype, PHY_TYPE_SSN)
+
+#define WLC_PHY_11N_CAP(band) PHYTYPE_11N_CAP((band)->phytype)
+
+/**********************************************************************
+ * ------------- End of Core phy/rev configuration. ----------------- *
+ * ********************************************************************
+ */
+
+/*************************************************
+ * Defaults for tunables (e.g. sizing constants)
+ *
+ * For each new tunable, add a member to the end
+ * of wlc_tunables_t in wlc_pub.h to enable
+ * runtime checks of tunable values. (Directly
+ * using the macros in code invalidates ROM code)
+ *
+ * ***********************************************
+ */
+#define NTXD 256 /* Max # of entries in Tx FIFO based on 4kb page size */
+#define NRXD 256 /* Max # of entries in Rx FIFO based on 4kb page size */
+#define NRXBUFPOST 32 /* try to keep this # rbufs posted to the chip */
+#define MAXSCB 32 /* Maximum SCBs in cache for STA */
+#define AMPDU_NUM_MPDU 16 /* max allowed number of mpdus in an ampdu (2 streams) */
+
+/* Count of packet callback structures. either of following
+ * 1. Set to the number of SCBs since a STA
+ * can queue up a rate callback for each IBSS STA it knows about, and an AP can
+ * queue up an "are you there?" Null Data callback for each associated STA
+ * 2. controlled by tunable config file
+ */
+#define MAXPKTCB MAXSCB /* Max number of packet callbacks */
+
+/* NetBSD also needs to keep track of this */
+#define WLC_MAX_UCODE_BSS (16) /* Number of BSS handled in ucode bcn/prb */
+#define WLC_MAX_UCODE_BSS4 (4) /* Number of BSS handled in sw bcn/prb */
+#define WLC_MAXBSSCFG (1) /* max # BSS configs */
+#define MAXBSS 64 /* max # available networks */
+#define WLC_DATAHIWAT 50 /* data msg txq hiwat mark */
+#define WLC_AMPDUDATAHIWAT 255
+
+/* bounded rx loops */
+#define RXBND 8 /* max # frames to process in wlc_recv() */
+#define TXSBND 8 /* max # tx status to process in wlc_txstatus() */
+
+#define WLBANDINITFN(_fn) _fn
+
+#define BAND_5G(bt) ((bt) == WLC_BAND_5G)
+#define BAND_2G(bt) ((bt) == WLC_BAND_2G)
+
#define BCMMSG(dev, fmt, args...) \
do { \
if (brcm_msg_level & LOG_TRACE_VAL) \
#define SET_REG(r, mask, val) \
W_REG((r), ((R_REG(r) & ~(mask)) | (val)))
+
/* forward declarations */
struct sk_buff;
struct brcms_info;
projects / mv-sheeva.git / blobdiff