/* 32 bits addressing */
-/* dma registers per channel(xmt or rcv) */
-typedef volatile struct {
- u32 control; /* enable, et al */
- u32 addr; /* descriptor ring base address (4K aligned) */
- u32 ptr; /* last descriptor posted to chip */
- u32 status; /* current active descriptor, et al */
-} dma32regs_t;
-
-typedef volatile struct {
- dma32regs_t xmt; /* dma tx channel */
- dma32regs_t rcv; /* dma rx channel */
-} dma32regp_t;
-
typedef volatile struct { /* diag access */
u32 fifoaddr; /* diag address */
u32 fifodatalow; /* low 32bits of data */
u32 pad; /* reserved */
} dma32diag_t;
-/*
- * DMA Descriptor
- * Descriptors are only read by the hardware, never written back.
- */
-typedef volatile struct {
- u32 ctrl; /* misc control bits & bufcount */
- u32 addr; /* data buffer address */
-} dma32dd_t;
-
-/*
- * Each descriptor ring must be 4096byte aligned, and fit within a single 4096byte page.
- */
-#define D32RINGALIGN_BITS 12
-#define D32MAXRINGSZ (1 << D32RINGALIGN_BITS)
-#define D32RINGALIGN (1 << D32RINGALIGN_BITS)
-
-#define D32MAXDD (D32MAXRINGSZ / sizeof (dma32dd_t))
-
-/* transmit channel control */
-#define XC_XE ((u32)1 << 0) /* transmit enable */
-#define XC_SE ((u32)1 << 1) /* transmit suspend request */
-#define XC_LE ((u32)1 << 2) /* loopback enable */
-#define XC_FL ((u32)1 << 4) /* flush request */
-#define XC_PD ((u32)1 << 11) /* parity check disable */
-#define XC_AE ((u32)3 << 16) /* address extension bits */
-#define XC_AE_SHIFT 16
-
-/* transmit descriptor table pointer */
-#define XP_LD_MASK 0xfff /* last valid descriptor */
-
-/* transmit channel status */
-#define XS_CD_MASK 0x0fff /* current descriptor pointer */
-#define XS_XS_MASK 0xf000 /* transmit state */
-#define XS_XS_SHIFT 12
-#define XS_XS_DISABLED 0x0000 /* disabled */
-#define XS_XS_ACTIVE 0x1000 /* active */
-#define XS_XS_IDLE 0x2000 /* idle wait */
-#define XS_XS_STOPPED 0x3000 /* stopped */
-#define XS_XS_SUSP 0x4000 /* suspend pending */
-#define XS_XE_MASK 0xf0000 /* transmit errors */
-#define XS_XE_SHIFT 16
-#define XS_XE_NOERR 0x00000 /* no error */
-#define XS_XE_DPE 0x10000 /* descriptor protocol error */
-#define XS_XE_DFU 0x20000 /* data fifo underrun */
-#define XS_XE_BEBR 0x30000 /* bus error on buffer read */
-#define XS_XE_BEDA 0x40000 /* bus error on descriptor access */
-#define XS_AD_MASK 0xfff00000 /* active descriptor */
-#define XS_AD_SHIFT 20
-
-/* receive channel control */
-#define RC_RE ((u32)1 << 0) /* receive enable */
-#define RC_RO_MASK 0xfe /* receive frame offset */
-#define RC_RO_SHIFT 1
-#define RC_FM ((u32)1 << 8) /* direct fifo receive (pio) mode */
-#define RC_SH ((u32)1 << 9) /* separate rx header descriptor enable */
-#define RC_OC ((u32)1 << 10) /* overflow continue */
-#define RC_PD ((u32)1 << 11) /* parity check disable */
-#define RC_AE ((u32)3 << 16) /* address extension bits */
-#define RC_AE_SHIFT 16
-
-/* receive descriptor table pointer */
-#define RP_LD_MASK 0xfff /* last valid descriptor */
-
-/* receive channel status */
-#define RS_CD_MASK 0x0fff /* current descriptor pointer */
-#define RS_RS_MASK 0xf000 /* receive state */
-#define RS_RS_SHIFT 12
-#define RS_RS_DISABLED 0x0000 /* disabled */
-#define RS_RS_ACTIVE 0x1000 /* active */
-#define RS_RS_IDLE 0x2000 /* idle wait */
-#define RS_RS_STOPPED 0x3000 /* reserved */
-#define RS_RE_MASK 0xf0000 /* receive errors */
-#define RS_RE_SHIFT 16
-#define RS_RE_NOERR 0x00000 /* no error */
-#define RS_RE_DPE 0x10000 /* descriptor protocol error */
-#define RS_RE_DFO 0x20000 /* data fifo overflow */
-#define RS_RE_BEBW 0x30000 /* bus error on buffer write */
-#define RS_RE_BEDA 0x40000 /* bus error on descriptor access */
-#define RS_AD_MASK 0xfff00000 /* active descriptor */
-#define RS_AD_SHIFT 20
-
-/* fifoaddr */
-#define FA_OFF_MASK 0xffff /* offset */
-#define FA_SEL_MASK 0xf0000 /* select */
-#define FA_SEL_SHIFT 16
-#define FA_SEL_XDD 0x00000 /* transmit dma data */
-#define FA_SEL_XDP 0x10000 /* transmit dma pointers */
-#define FA_SEL_RDD 0x40000 /* receive dma data */
-#define FA_SEL_RDP 0x50000 /* receive dma pointers */
-#define FA_SEL_XFD 0x80000 /* transmit fifo data */
-#define FA_SEL_XFP 0x90000 /* transmit fifo pointers */
-#define FA_SEL_RFD 0xc0000 /* receive fifo data */
-#define FA_SEL_RFP 0xd0000 /* receive fifo pointers */
-#define FA_SEL_RSD 0xe0000 /* receive frame status data */
-#define FA_SEL_RSP 0xf0000 /* receive frame status pointers */
-
-/* descriptor control flags */
-#define CTRL_BC_MASK 0x00001fff /* buffer byte count, real data len must <= 4KB */
-#define CTRL_AE ((u32)3 << 16) /* address extension bits */
-#define CTRL_AE_SHIFT 16
-#define CTRL_PARITY ((u32)3 << 18) /* parity bit */
-#define CTRL_EOT ((u32)1 << 28) /* end of descriptor table */
-#define CTRL_IOC ((u32)1 << 29) /* interrupt on completion */
-#define CTRL_EOF ((u32)1 << 30) /* end of frame */
-#define CTRL_SOF ((u32)1 << 31) /* start of frame */
-
-/* control flags in the range [27:20] are core-specific and not defined here */
-#define CTRL_CORE_MASK 0x0ff00000
-
/* 64 bits addressing */
/* dma registers per channel(xmt or rcv) */
u32 status1; /* active descriptor, xmt error */
} dma64regs_t;
-typedef volatile struct {
- dma64regs_t tx; /* dma64 tx channel */
- dma64regs_t rx; /* dma64 rx channel */
-} dma64regp_t;
-
-typedef volatile struct { /* diag access */
- u32 fifoaddr; /* diag address */
- u32 fifodatalow; /* low 32bits of data */
- u32 fifodatahigh; /* high 32bits of data */
- u32 pad; /* reserved */
-} dma64diag_t;
-
-/*
- * DMA Descriptor
- * Descriptors are only read by the hardware, never written back.
- */
-typedef volatile struct {
- u32 ctrl1; /* misc control bits & bufcount */
- u32 ctrl2; /* buffer count and address extension */
- u32 addrlow; /* memory address of the date buffer, bits 31:0 */
- u32 addrhigh; /* memory address of the date buffer, bits 63:32 */
-} dma64dd_t;
-
-/*
- * Each descriptor ring must be 8kB aligned, and fit within a contiguous 8kB physical address.
- */
-#define D64RINGALIGN_BITS 13
-#define D64MAXRINGSZ (1 << D64RINGALIGN_BITS)
-#define D64RINGALIGN (1 << D64RINGALIGN_BITS)
-
-#define D64MAXDD (D64MAXRINGSZ / sizeof (dma64dd_t))
-
-/* transmit channel control */
-#define D64_XC_XE 0x00000001 /* transmit enable */
-#define D64_XC_SE 0x00000002 /* transmit suspend request */
-#define D64_XC_LE 0x00000004 /* loopback enable */
-#define D64_XC_FL 0x00000010 /* flush request */
-#define D64_XC_PD 0x00000800 /* parity check disable */
-#define D64_XC_AE 0x00030000 /* address extension bits */
-#define D64_XC_AE_SHIFT 16
-
-/* transmit descriptor table pointer */
-#define D64_XP_LD_MASK 0x00000fff /* last valid descriptor */
-
-/* transmit channel status */
-#define D64_XS0_CD_MASK 0x00001fff /* current descriptor pointer */
-#define D64_XS0_XS_MASK 0xf0000000 /* transmit state */
-#define D64_XS0_XS_SHIFT 28
-#define D64_XS0_XS_DISABLED 0x00000000 /* disabled */
-#define D64_XS0_XS_ACTIVE 0x10000000 /* active */
-#define D64_XS0_XS_IDLE 0x20000000 /* idle wait */
-#define D64_XS0_XS_STOPPED 0x30000000 /* stopped */
-#define D64_XS0_XS_SUSP 0x40000000 /* suspend pending */
-
-#define D64_XS1_AD_MASK 0x00001fff /* active descriptor */
-#define D64_XS1_XE_MASK 0xf0000000 /* transmit errors */
-#define D64_XS1_XE_SHIFT 28
-#define D64_XS1_XE_NOERR 0x00000000 /* no error */
-#define D64_XS1_XE_DPE 0x10000000 /* descriptor protocol error */
-#define D64_XS1_XE_DFU 0x20000000 /* data fifo underrun */
-#define D64_XS1_XE_DTE 0x30000000 /* data transfer error */
-#define D64_XS1_XE_DESRE 0x40000000 /* descriptor read error */
-#define D64_XS1_XE_COREE 0x50000000 /* core error */
-
-/* receive channel control */
-#define D64_RC_RE 0x00000001 /* receive enable */
-#define D64_RC_RO_MASK 0x000000fe /* receive frame offset */
-#define D64_RC_RO_SHIFT 1
-#define D64_RC_FM 0x00000100 /* direct fifo receive (pio) mode */
-#define D64_RC_SH 0x00000200 /* separate rx header descriptor enable */
-#define D64_RC_OC 0x00000400 /* overflow continue */
-#define D64_RC_PD 0x00000800 /* parity check disable */
-#define D64_RC_AE 0x00030000 /* address extension bits */
-#define D64_RC_AE_SHIFT 16
-
-/* flags for dma controller */
-#define DMA_CTRL_PEN (1 << 0) /* partity enable */
-#define DMA_CTRL_ROC (1 << 1) /* rx overflow continue */
-#define DMA_CTRL_RXMULTI (1 << 2) /* allow rx scatter to multiple descriptors */
-#define DMA_CTRL_UNFRAMED (1 << 3) /* Unframed Rx/Tx data */
-
-/* receive descriptor table pointer */
-#define D64_RP_LD_MASK 0x00000fff /* last valid descriptor */
-
-/* receive channel status */
-#define D64_RS0_CD_MASK 0x00001fff /* current descriptor pointer */
-#define D64_RS0_RS_MASK 0xf0000000 /* receive state */
-#define D64_RS0_RS_SHIFT 28
-#define D64_RS0_RS_DISABLED 0x00000000 /* disabled */
-#define D64_RS0_RS_ACTIVE 0x10000000 /* active */
-#define D64_RS0_RS_IDLE 0x20000000 /* idle wait */
-#define D64_RS0_RS_STOPPED 0x30000000 /* stopped */
-#define D64_RS0_RS_SUSP 0x40000000 /* suspend pending */
-
-#define D64_RS1_AD_MASK 0x0001ffff /* active descriptor */
-#define D64_RS1_RE_MASK 0xf0000000 /* receive errors */
-#define D64_RS1_RE_SHIFT 28
-#define D64_RS1_RE_NOERR 0x00000000 /* no error */
-#define D64_RS1_RE_DPO 0x10000000 /* descriptor protocol error */
-#define D64_RS1_RE_DFU 0x20000000 /* data fifo overflow */
-#define D64_RS1_RE_DTE 0x30000000 /* data transfer error */
-#define D64_RS1_RE_DESRE 0x40000000 /* descriptor read error */
-#define D64_RS1_RE_COREE 0x50000000 /* core error */
-
-/* fifoaddr */
-#define D64_FA_OFF_MASK 0xffff /* offset */
-#define D64_FA_SEL_MASK 0xf0000 /* select */
-#define D64_FA_SEL_SHIFT 16
-#define D64_FA_SEL_XDD 0x00000 /* transmit dma data */
-#define D64_FA_SEL_XDP 0x10000 /* transmit dma pointers */
-#define D64_FA_SEL_RDD 0x40000 /* receive dma data */
-#define D64_FA_SEL_RDP 0x50000 /* receive dma pointers */
-#define D64_FA_SEL_XFD 0x80000 /* transmit fifo data */
-#define D64_FA_SEL_XFP 0x90000 /* transmit fifo pointers */
-#define D64_FA_SEL_RFD 0xc0000 /* receive fifo data */
-#define D64_FA_SEL_RFP 0xd0000 /* receive fifo pointers */
-#define D64_FA_SEL_RSD 0xe0000 /* receive frame status data */
-#define D64_FA_SEL_RSP 0xf0000 /* receive frame status pointers */
-
-/* descriptor control flags 1 */
-#define D64_CTRL_COREFLAGS 0x0ff00000 /* core specific flags */
-#define D64_CTRL1_EOT ((u32)1 << 28) /* end of descriptor table */
-#define D64_CTRL1_IOC ((u32)1 << 29) /* interrupt on completion */
-#define D64_CTRL1_EOF ((u32)1 << 30) /* end of frame */
-#define D64_CTRL1_SOF ((u32)1 << 31) /* start of frame */
-
-/* descriptor control flags 2 */
-#define D64_CTRL2_BC_MASK 0x00007fff /* buffer byte count. real data len must <= 16KB */
-#define D64_CTRL2_AE 0x00030000 /* address extension bits */
-#define D64_CTRL2_AE_SHIFT 16
-#define D64_CTRL2_PARITY 0x00040000 /* parity bit */
-
-/* control flags in the range [27:20] are core-specific and not defined here */
-#define D64_CTRL_CORE_MASK 0x0ff00000
-
-#define D64_RX_FRM_STS_LEN 0x0000ffff /* frame length mask */
-#define D64_RX_FRM_STS_OVFL 0x00800000 /* RxOverFlow */
-#define D64_RX_FRM_STS_DSCRCNT 0x0f000000 /* no. of descriptors used - 1 */
-#define D64_RX_FRM_STS_DATATYPE 0xf0000000 /* core-dependent data type */
-
-/* receive frame status */
-typedef volatile struct {
- u16 len;
- u16 flags;
-} dma_rxh_t;
-
#endif /* _sbdma_h_ */
projects / mv-sheeva.git / blobdiff