/*
- comedi/drivers/das16.c
- DAS16 driver
-
- COMEDI - Linux Control and Measurement Device Interface
- Copyright (C) 2000 David A. Schleef <ds@schleef.org>
- Copyright (C) 2000 Chris R. Baugher <baugher@enteract.com>
- Copyright (C) 2001,2002 Frank Mori Hess <fmhess@users.sourceforge.net>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-*/
-/*
-Driver: das16
-Description: DAS16 compatible boards
-Author: Sam Moore, Warren Jasper, ds, Chris Baugher, Frank Hess, Roman Fietze
-Devices: [Keithley Metrabyte] DAS-16 (das-16), DAS-16G (das-16g),
- DAS-16F (das-16f), DAS-1201 (das-1201), DAS-1202 (das-1202),
- DAS-1401 (das-1401), DAS-1402 (das-1402), DAS-1601 (das-1601),
- DAS-1602 (das-1602),
- [ComputerBoards] PC104-DAS16/JR (pc104-das16jr),
- PC104-DAS16JR/16 (pc104-das16jr/16),
- CIO-DAS16JR/16 (cio-das16jr/16),
- CIO-DAS16/JR (cio-das16/jr), CIO-DAS1401/12 (cio-das1401/12),
- CIO-DAS1402/12 (cio-das1402/12), CIO-DAS1402/16 (cio-das1402/16),
- CIO-DAS1601/12 (cio-das1601/12), CIO-DAS1602/12 (cio-das1602/12),
- CIO-DAS1602/16 (cio-das1602/16), CIO-DAS16/330 (cio-das16/330)
-Status: works
-Updated: 2003-10-12
-
-A rewrite of the das16 and das1600 drivers.
-Options:
- [0] - base io address
- [1] - irq (does nothing, irq is not used anymore)
- [2] - dma (optional, required for comedi_command support)
- [3] - master clock speed in MHz (optional, 1 or 10, ignored if
- board can probe clock, defaults to 1)
- [4] - analog input range lowest voltage in microvolts (optional,
- only useful if your board does not have software
- programmable gain)
- [5] - analog input range highest voltage in microvolts (optional,
- only useful if board does not have software programmable
- gain)
- [6] - analog output range lowest voltage in microvolts (optional)
- [7] - analog output range highest voltage in microvolts (optional)
- [8] - use timer mode for DMA. Timer mode is needed e.g. for
- buggy DMA controllers in NS CS5530A (Geode Companion), and for
- 'jr' cards that lack a hardware fifo. This option is no
- longer needed, since timer mode is _always_ used.
-
-Passing a zero for an option is the same as leaving it unspecified.
+ * das16.c
+ * DAS16 driver
+ *
+ * COMEDI - Linux Control and Measurement Device Interface
+ * Copyright (C) 2000 David A. Schleef <ds@schleef.org>
+ * Copyright (C) 2000 Chris R. Baugher <baugher@enteract.com>
+ * Copyright (C) 2001,2002 Frank Mori Hess <fmhess@users.sourceforge.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
-*/
/*
+ * Driver: das16
+ * Description: DAS16 compatible boards
+ * Author: Sam Moore, Warren Jasper, ds, Chris Baugher, Frank Hess, Roman Fietze
+ * Devices: (Keithley Metrabyte) DAS-16 [das-16]
+ * (Keithley Metrabyte) DAS-16G [das-16g]
+ * (Keithley Metrabyte) DAS-16F [das-16f]
+ * (Keithley Metrabyte) DAS-1201 [das-1201]
+ * (Keithley Metrabyte) DAS-1202 [das-1202]
+ * (Keithley Metrabyte) DAS-1401 [das-1401]
+ * (Keithley Metrabyte) DAS-1402 [das-1402]
+ * (Keithley Metrabyte) DAS-1601 [das-1601]
+ * (Keithley Metrabyte) DAS-1602 [das-1602]
+ * (ComputerBoards) PC104-DAS16/JR [pc104-das16jr]
+ * (ComputerBoards) PC104-DAS16JR/16 [pc104-das16jr/16]
+ * (ComputerBoards) CIO-DAS16 [cio-das16]
+ * (ComputerBoards) CIO-DAS16F [cio-das16/f]
+ * (ComputerBoards) CIO-DAS16/JR [cio-das16/jr]
+ * (ComputerBoards) CIO-DAS16JR/16 [cio-das16jr/16]
+ * (ComputerBoards) CIO-DAS1401/12 [cio-das1401/12]
+ * (ComputerBoards) CIO-DAS1402/12 [cio-das1402/12]
+ * (ComputerBoards) CIO-DAS1402/16 [cio-das1402/16]
+ * (ComputerBoards) CIO-DAS1601/12 [cio-das1601/12]
+ * (ComputerBoards) CIO-DAS1602/12 [cio-das1602/12]
+ * (ComputerBoards) CIO-DAS1602/16 [cio-das1602/16]
+ * (ComputerBoards) CIO-DAS16/330 [cio-das16/330]
+ * Status: works
+ * Updated: 2003-10-12
+ *
+ * A rewrite of the das16 and das1600 drivers.
+ *
+ * Options:
+ * [0] - base io address
+ * [1] - irq (does nothing, irq is not used anymore)
+ * [2] - dma channel (optional, required for comedi_command support)
+ * [3] - master clock speed in MHz (optional, 1 or 10, ignored if
+ * board can probe clock, defaults to 1)
+ * [4] - analog input range lowest voltage in microvolts (optional,
+ * only useful if your board does not have software
+ * programmable gain)
+ * [5] - analog input range highest voltage in microvolts (optional,
+ * only useful if board does not have software programmable
+ * gain)
+ * [6] - analog output range lowest voltage in microvolts (optional)
+ * [7] - analog output range highest voltage in microvolts (optional)
+ *
+ * Passing a zero for an option is the same as leaving it unspecified.
+ */
-Testing and debugging help provided by Daniel Koch.
-
-Keithley Manuals:
- 2309.PDF (das16)
- 4919.PDF (das1400, 1600)
- 4922.PDF (das-1400)
- 4923.PDF (das1200, 1400, 1600)
-
-Computer boards manuals also available from their website
-www.measurementcomputing.com
-
-*/
+/*
+ * Testing and debugging help provided by Daniel Koch.
+ *
+ * Keithley Manuals:
+ * 2309.PDF (das16)
+ * 4919.PDF (das1400, 1600)
+ * 4922.PDF (das-1400)
+ * 4923.PDF (das1200, 1400, 1600)
+ *
+ * Computer boards manuals also available from their website
+ * www.measurementcomputing.com
+ */
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
unsigned int tmp = cmd->scan_begin_arg;
/* set divisors, correct timing arguments */
i8253_cascade_ns_to_timer_2div(devpriv->clockbase,
- &(devpriv->divisor1),
- &(devpriv->divisor2),
- &(cmd->scan_begin_arg),
+ &devpriv->divisor1,
+ &devpriv->divisor2,
+ &cmd->scan_begin_arg,
cmd->flags & TRIG_ROUND_MASK);
err += (tmp != cmd->scan_begin_arg);
}
unsigned int tmp = cmd->convert_arg;
/* set divisors, correct timing arguments */
i8253_cascade_ns_to_timer_2div(devpriv->clockbase,
- &(devpriv->divisor1),
- &(devpriv->divisor2),
- &(cmd->convert_arg),
+ &devpriv->divisor1,
+ &devpriv->divisor2,
+ &cmd->convert_arg,
cmd->flags & TRIG_ROUND_MASK);
err += (tmp != cmd->convert_arg);
}
struct das16_private_struct *devpriv = dev->private;
unsigned long timer_base = dev->iobase + DAS16_TIMER_BASE_REG;
- i8253_cascade_ns_to_timer_2div(devpriv->clockbase, &(devpriv->divisor1),
- &(devpriv->divisor2), &ns,
+ i8253_cascade_ns_to_timer_2div(devpriv->clockbase,
+ &devpriv->divisor1,
+ &devpriv->divisor2,
+ &ns,
rounding_flags & TRIG_ROUND_MASK);
/* Write the values of ctr1 and ctr2 into counters 1 and 2 */
set_dma_mode(devpriv->dma_chan, DMA_MODE_READ);
release_dma_lock(flags);
- init_timer(&(devpriv->timer));
+ init_timer(&devpriv->timer);
devpriv->timer.function = das16_timer_interrupt;
devpriv->timer.data = (unsigned long)dev;
}
projects / karo-tx-linux.git / blobdiff