#include "8255.h"
-#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/cisreg.h>
link = pcmcia_cur_dev; /* XXX hack */
if (!link)
return -EIO;
- iobase = link->io.BasePort1;
+ iobase = link->resource[0]->start;
#ifdef incomplete
- irq = link->irq.AssignedIRQ;
+ irq = link->irq;
#endif
break;
default:
less on other parts of the kernel.
*/
-/*
- The dev_info variable is the "key" that is used to match up this
- device driver with appropriate cards, through the card configuration
- database.
-*/
-
-static const dev_info_t dev_info = "ni_daq_dio24";
-
struct local_info_t {
struct pcmcia_device *link;
- dev_node_t node;
int stop;
struct bus_operations *bus;
};
local->link = link;
link->priv = local;
- /* Interrupt setup */
- link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
- link->irq.Handler = NULL;
-
/*
General socket configuration defaults can go here. In this
client, we assume very little, and rely on the CIS for almost
dev_dbg(&link->dev, "dio24_cs_detach\n");
- if (link->dev_node) {
- ((struct local_info_t *)link->priv)->stop = 1;
- dio24_release(link);
- }
+ ((struct local_info_t *)link->priv)->stop = 1;
+ dio24_release(link);
/* This points to the parent local_info_t struct */
- if (link->priv)
- kfree(link->priv);
+ kfree(link->priv);
} /* dio24_cs_detach */
unsigned int vcc,
void *priv_data)
{
- win_req_t *req = priv_data;
- memreq_t map;
-
if (cfg->index == 0)
return -ENODEV;
}
/* Do we need to allocate an interrupt? */
- if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
- p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+ p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
- p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(io->flags & CISTPL_IO_8BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(io->flags & CISTPL_IO_16BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
- p_dev->io.BasePort1 = io->win[0].base;
- p_dev->io.NumPorts1 = io->win[0].len;
+ p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+ p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[0]->flags |=
+ pcmcia_io_cfg_data_width(io->flags);
+ p_dev->resource[0]->start = io->win[0].base;
+ p_dev->resource[0]->end = io->win[0].len;
if (io->nwin > 1) {
- p_dev->io.Attributes2 = p_dev->io.Attributes1;
- p_dev->io.BasePort2 = io->win[1].base;
- p_dev->io.NumPorts2 = io->win[1].len;
+ p_dev->resource[1]->flags = p_dev->resource[0]->flags;
+ p_dev->resource[1]->start = io->win[1].base;
+ p_dev->resource[1]->end = io->win[1].len;
}
/* This reserves IO space but doesn't actually enable it */
- if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+ if (pcmcia_request_io(p_dev) != 0)
return -ENODEV;
}
- if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) {
- cistpl_mem_t *mem =
- (cfg->mem.nwin) ? &cfg->mem : &dflt->mem;
- req->Attributes = WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_CM;
- req->Attributes |= WIN_ENABLE;
- req->Base = mem->win[0].host_addr;
- req->Size = mem->win[0].len;
- if (req->Size < 0x1000)
- req->Size = 0x1000;
- req->AccessSpeed = 0;
- if (pcmcia_request_window(p_dev, req, &p_dev->win))
- return -ENODEV;
- map.Page = 0;
- map.CardOffset = mem->win[0].card_addr;
- if (pcmcia_map_mem_page(p_dev, p_dev->win, &map))
- return -ENODEV;
- }
/* If we got this far, we're cool! */
return 0;
}
static void dio24_config(struct pcmcia_device *link)
{
- struct local_info_t *dev = link->priv;
int ret;
- win_req_t req;
printk(KERN_INFO "ni_daq_dio24: HOLA SOY YO! - config\n");
dev_dbg(&link->dev, "dio24_config\n");
- ret = pcmcia_loop_config(link, dio24_pcmcia_config_loop, &req);
+ ret = pcmcia_loop_config(link, dio24_pcmcia_config_loop, NULL);
if (ret) {
dev_warn(&link->dev, "no configuration found\n");
goto failed;
}
- /*
- Allocate an interrupt line. Note that this does not assign a
- handler to the interrupt, unless the 'Handler' member of the
- irq structure is initialized.
- */
- if (link->conf.Attributes & CONF_ENABLE_IRQ) {
- ret = pcmcia_request_irq(link, &link->irq);
- if (ret)
- goto failed;
- }
+ if (!link->irq)
+ goto failed;
/*
This actually configures the PCMCIA socket -- setting up
if (ret)
goto failed;
- /*
- At this point, the dev_node_t structure(s) need to be
- initialized and arranged in a linked list at link->dev.
- */
- sprintf(dev->node.dev_name, "ni_daq_dio24");
- dev->node.major = dev->node.minor = 0;
- link->dev_node = &dev->node;
-
/* Finally, report what we've done */
- printk(KERN_INFO "%s: index 0x%02x",
- dev->node.dev_name, link->conf.ConfigIndex);
+ dev_info(&link->dev, "index 0x%02x", link->conf.ConfigIndex);
if (link->conf.Attributes & CONF_ENABLE_IRQ)
- printk(", irq %d", link->irq.AssignedIRQ);
- if (link->io.NumPorts1)
- printk(", io 0x%04x-0x%04x", link->io.BasePort1,
- link->io.BasePort1 + link->io.NumPorts1 - 1);
- if (link->io.NumPorts2)
- printk(" & 0x%04x-0x%04x", link->io.BasePort2,
- link->io.BasePort2 + link->io.NumPorts2 - 1);
- if (link->win)
- printk(", mem 0x%06lx-0x%06lx", req.Base,
- req.Base + req.Size - 1);
+ printk(", irq %d", link->irq);
+ if (link->resource[0])
+ printk(" & %pR", link->resource[0]);
+ if (link->resource[1])
+ printk(" & %pR", link->resource[1]);
printk("\n");
return;
};
MODULE_DEVICE_TABLE(pcmcia, dio24_cs_ids);
+MODULE_AUTHOR("Daniel Vecino Castel <dvecino@able.es>");
+MODULE_DESCRIPTION("Comedi driver for National Instruments "
+ "PCMCIA DAQ-Card DIO-24");
+MODULE_LICENSE("GPL");
struct pcmcia_driver dio24_cs_driver = {
.probe = dio24_cs_attach,
.id_table = dio24_cs_ids,
.owner = THIS_MODULE,
.drv = {
- .name = dev_info,
+ .name = "ni_daq_dio24",
},
};